型号 | SN75446P | SN75446D | SN75447P |
---|---|---|---|
描述 | Peripheral Driver 8-PDIP | Peripheral Driver 8-SOIC | Peripheral Driver 8-PDIP 0 to 70 |
Brand Name | Texas Instruments | Texas Instruments | Texas Instruments |
是否无铅 | 含铅 | 含铅 | 含铅 |
是否Rohs认证 | 不符合 | 不符合 | 不符合 |
厂商名称 | Texas Instruments(德州仪器) | Texas Instruments(德州仪器) | Texas Instruments(德州仪器) |
零件包装代码 | DIP | SOIC | DIP |
包装说明 | DIP, DIP8,.3 | SOP, SOP8,.25 | DIP, DIP8,.3 |
针数 | 8 | 8 | 8 |
Reach Compliance Code | not_compliant | not_compliant | not_compliant |
ECCN代码 | EAR99 | EAR99 | EAR99 |
内置保护 | TRANSIENT | TRANSIENT | TRANSIENT |
驱动器位数 | 2 | 2 | 2 |
输入特性 | STANDARD | STANDARD | STANDARD |
接口集成电路类型 | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
JESD-30 代码 | R-PDIP-T8 | R-PDSO-G8 | R-PDIP-T8 |
长度 | 9.81 mm | 4.9 mm | 9.81 mm |
功能数量 | 2 | 2 | 2 |
端子数量 | 8 | 8 | 8 |
最高工作温度 | 70 °C | 70 °C | 70 °C |
输出特性 | OPEN-COLLECTOR | OPEN-COLLECTOR | OPEN-COLLECTOR |
输出电流流向 | SINK | SINK | SINK |
最大输出电流 | 0.1 A | 0.1 A | 0.1 A |
标称输出峰值电流 | 0.4 A | 0.4 A | 0.4 A |
输出极性 | TRUE | TRUE | INVERTED |
封装主体材料 | PLASTIC/EPOXY | PLASTIC/EPOXY | PLASTIC/EPOXY |
封装代码 | DIP | SOP | DIP |
封装等效代码 | DIP8,.3 | SOP8,.25 | DIP8,.3 |
封装形状 | RECTANGULAR | RECTANGULAR | RECTANGULAR |
封装形式 | IN-LINE | SMALL OUTLINE | IN-LINE |
峰值回流温度(摄氏度) | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED |
电源 | 5 V | 5 V | 5 V |
认证状态 | Not Qualified | Not Qualified | Not Qualified |
座面最大高度 | 5.08 mm | 1.75 mm | 5.08 mm |
最大压摆率 | 18 mA | 18 mA | 18 mA |
最大供电电压 | 5.25 V | 5.25 V | 5.25 V |
最小供电电压 | 4.75 V | 4.75 V | 4.75 V |
标称供电电压 | 5 V | 5 V | 5 V |
表面贴装 | NO | YES | NO |
技术 | BIPOLAR | BIPOLAR | BIPOLAR |
温度等级 | COMMERCIAL | COMMERCIAL | COMMERCIAL |
端子形式 | THROUGH-HOLE | GULL WING | THROUGH-HOLE |
端子节距 | 2.54 mm | 1.27 mm | 2.54 mm |
端子位置 | DUAL | DUAL | DUAL |
处于峰值回流温度下的最长时间 | NOT SPECIFIED | NOT SPECIFIED | NOT SPECIFIED |
断开时间 | 0.75 µs | 0.75 µs | 0.75 µs |
接通时间 | 0.5 µs | 0.5 µs | 0.5 µs |
宽度 | 7.62 mm | 3.9 mm | 7.62 mm |
Factory Lead Time | - | 1 week | 1 week |