F-210-1 SUPPLEMENT
®
(0,635mm) .025"
MICD, SQCD, 6QCD SERIES
MICD–038–06.00–STR–STL–4
MICD–019–06.00–TTL–STL–3
HIGH SPEED COAX CABLE ASSEMBLIES
SPECIFICATIONS
For complete specifications
see www.samtec.com?MICD,
see www.samtec.com?SQCD or
see www.samtec.com?6QCD
Cable:
38 AWG coax
micro ribbon
Signal Routing:
(MICD, SQCD only)
50Ω Single-Ended
Overall Length:
(152mm) 6" to
(1m) 40" standard
Cable Flexing Life:
>40,000 cycles
Cable Bending Radius:
<2,5mm
Plating:
Au over 50µ" (1,27µm) Ni
Current Rating:
300 millamp max
Propagation Delay:
4.5 nsec/meter
Operating Temp Range:
-40°C to +105°C
RoHS Compliant:
Yes
MICD Mates with:
MIS, MIT
SQCD Mates with:
QTS, QSS
6QCD Mates with:
QMS, QFS
Increased
Insertion
Depth
Socket or
Terminal
Cable
Length
6" (152,4mm)
12" (304,8mm)
19.68" (0,5m)
39.37" (1m)
Rated @ 7dB
Insertion Loss
MICD
3.51 GHz / 7.02 Gbps
3.45 GHz / 6.90 Gbps
4.47 GHz / 8.94 Gbps
1.60 GHz / 3.20 Gbps
38 AWG
micro ribbon
coax cable
Performance and complete test data available at
www.samtec.com?MICD or contact sig@samtec.com
Surface Mount or
Edge Mount
APPLICATIONS
(12,70)
.500
TYPE
NO. POSITIONS
PER ROW
WIRE LENGTH
–019, –038, –057, –076
(16,56)
.652
(9,28)
.365
–“XX.XX”
= Wire Length in Inches
(95,3mm) 03.75" Minimum.
MICD
= Mates with MIS/MIT
(MICD)
–025, –050, –075, –100
(SQCD)
SQCD
= Mates with QTS/QSS
Processing conditions will
affect mated height.
–026, –052, –078, –104
(6QCD)
OAL = Wire Length +
L
Wire Length ±(1,27) .050
6QCD
= Mates with QMS/QFS
Note:
Cable lengths longer than
40.00" (1 meter) are not
supported with S.I. test data.
Note:
Verify part number and correct
wiring scheme with Samtec’s
Interactive Cable Builder at
www.samtec.com/cable_
builder/pitch.aspx
Note:
This Series is non-standard,
non-returnable.
END TO END
Surface Mount to
Surface Mount
Surface Mount to
Edge Mount (Terminal)
Surface Mount to
Edge Mount (Socket)
Edge Mount (Terminal) to
Edge Mount (Terminal)
Edge Mount (Terminal) to
Edge Mount (Socket)
Edge Mount (Socket) to
Edge Mount (Socket)
L
MICD SQCD 6QCD
(27,98)
1.101
(24,15)
.951
(23,51)
.926
(20,32)
.800
(19,69)
.775
(19,05)
.750
(24,13) (28,47)
1.121
.950
(21,21) (27,09)
1.067
.835
(20,48) (25,70)
1.012
.806
(18,29)
N/A
.720
(17,55)
N/A
.691
(16,81)
N/A
.662
END NO. 1
(-STR SHOWN)
END NO. 2
(-TTR SHOWN)
WWW.SAMTEC.COM
6QCD–026–06.00–TEU–STR–1-F
SQCD–025–06.00–TED–STR–1
6QCD–026–06.00–STR–TTL–3–F
Choice of socket
or terminal
SCREW MOUNT
APPLICATIONS
(–F, –S, –B)
Choice of Screw
mount end options
KFE-440-4ET
KF2-440-ET
Choice of screw
mount end options
END
NO. 1
END
NO. 2
WIRING OPTION
SCREW DOWN
END OPTION
Specify
END ASSEMBLIES
from chart
–1
= Pin 1 to Pin 1
Leave blank for no Screw Option
–2
= Pin 1 to Pin 2
–F
= End No. 1
END
SURFACE MOUNT
Terminal, Top,
Notch
Right
Terminal, Top,
Notch
Left
Terminal, Bottom,
Notch
Right
Terminal, Bottom,
Notch
Left
Socket, Top
Notch
Right,
Socket, Top,
Notch
Left
Socket, Bottom,
Notch
Right
Socket, Bottom,
Notch
Left
–3
= Pin 1 to Second Last Pin
–S
= End No. 2
TTR
TTL
TBR
TBL
STR
STL
SBR
SBL
–4
= Pin 1 to Last Pin
–B
= Both Ends
END
EDGE MOUNT
Terminal, Edge,
Notch
Up
Terminal, Edge,
Notch
Down
Socket, Edge,
Notch
Up
Socket, Edge,
Notch
Down
TEU
TED
SEU
SED
#4-40
Threads
(3,28)
.129 DIA
SURFACE MOUNT (–XTX & –XBX)
SCREW DOWN OPTIONS
EDGE MOUNT (–XEX)
SCREW DOWN OPTIONS
WWW.SAMTEC.COM
FPGA/CPLD
