TG-PP-10 is a one-part thermal conductive interface material based on silicone resins. It does not bleed and flow. It is
designed for very good thermal conduction with high electrical insulation.
Applications
Thermal conductive interface material for electronic parts and devices.
Guidelines for use
1.
2.
3.
4.
5.
Thaw the silicone to room temperature before use
Wear rubber glove when handling the silicone putty
Scoop a quantity of the silicone putty from the container using a stainless steel spoon
Work and knead the putty around electronic part and circuit by hand
Wipe off any excess party with a piece of dry cloth. Further cleaning of residues may be achieved by wiping
with cloth wetted with isopropanol
Properties
Property
Chemical type
Appearance
Mix ratio, by weight
Shelf life
Viscosity, Brookfield RVT,
25⁰C
Specific gravity, 25⁰C
Thermal Conductivity
Hardness
Storage Temperature
Storage
Tightly close original container of unused product and store in dark and cool place
Typical Value
Silicone
White Putty
1 component
6
Putty
3.2
10
50
-50 to 200
Unit
-
-
-
Month
cP
-
W / mK
Shore 00
⁰C
Test Method
-
Visual
-
-
ASTM D792
ASTM D792
ISO/DIS 22007
ASTM D2240
-
NOTICE:
The information contained herein is to the best of our knowledge true and accurate. However, since the varied conditions of potential use are beyond
our control, all recommendations or suggestions are presented without guarantee or responsibility on our part and users should make their own test to
determine the suitability of our products in any specific situation. This product is sold without warranty either expressed or implied, of fitness for a particular
purpose or otherwise, except that this product shall be of standard quality, and except to the extent otherwise stated T-Global Technology Europe and
North America’s invoice, quotation, or order acknowledgment. We disclaim any and liability incurred in connection with the use of information contained
herein, or otherwise. All risks of such are assumed by the user. Furthermore, nothing contained herein shall be construed as a recommendation to use any
process or to manufacture or to use any product in conflict with existing future patents covering any product or material or its use.
