0402
0603
0805
1206
2010
2512
•
•
•
•
•
•
•
Precision nicrome thin film resistor element
99.5% Al2O3 substrate material
Nickel barrier layer provides excellent solder leach resistance
Tolerances to ±0.01%
Ultra low noise resistor film
Passivated resistor element
Available on tape and reel
Features
Thin film technology
Full Wraparound
Nickel Barrier for
excellent solderability
Resistance values from
.022 ohm to 3 Megohm
Standard Tolerances
to ±0.1%
±0.01% and ±0.05%
available as special order
25 ppm/°C
Standard TCR
10ppm/°C
and 5ppm/°C
available as special order
PN
TPI-0402
TPI-0603
TPI-0805
TPI-1206
TPI-2010
TPI-2512
0.01%†
49.9Ω to
24.9Ω to
24.9Ω to
24.9Ω to
24.9Ω to
24.9Ω to
12KΩ
100KΩ
200KΩ
500KΩ
500KΩ
500KΩ
Nickel Barrier layer terminals
with a 100% Matte Tin finish
Standard
0.05%†
49.9Ω to 12KΩ
4.7Ω to 100KΩ
4.7Ω to 500KΩ
24.9Ω to 500KΩ
24.9Ω to 500KΩ
24.9Ω to 500KΩ
0.1%
1Ω to 205KΩ
4.7Ω to 1MΩ
4.7Ω to 2MΩ
1Ω to 2.5MΩ
4.7Ω to 3MΩ
4.7Ω to 3MΩ
1Ω
2Ω
1Ω
1Ω
1Ω
1Ω
to
to
to
to
to
to
0.5%
205KΩ
1MΩ
2MΩ
2.5MΩ
3MΩ
3MΩ
Low Ohms**
PN
TPI-0805
†
Available as a special order only.
** Additional values, sizes and tolerances available. Please consult factory.
1%
0.2Ω to 8.2Ω
Dimensions
Part Number
TPI-0402
TPI-0603
TPI-0805
TPI-1206
TPI-2010
TPI-2512
Length
0.039±.002
0.063±.008
0.079±.008
0.124±.010
0.200±.006
0.250±.006
Width
0.020±.002
0.031±.008
0.049±.008
0.063±.008
0.100±.006
0.122±.006
Height
0.016max.
0.022max.
0.026max.
0.026max.
0.026max.
0.026max.
Terminal
0.008±.004
0.012±.008
0.014±.010
0.020±.012
0.020±.010
0.020±.010
W
H
L
T
Characteristics
Operating temperature
Short time overload
Terminal strength
Solder heat resistance
Solderability
Temperature cycle
Load life
Current noise
-55°C to +125°C
± 0.5% + 0.05Ω Max.
± 0.5% + 0.05Ω Max.
± 0.5% + 0.05Ω Max.
95% minimum coverage
± 0.5% + 0.05Ω Max.
± 0.5% + 0.05Ω Max.
-38dB to -30dB typical
TCR
25 ppm/°C
10 ppm/°C
5 ppm/°C
25 ppm/°C
10 ppm/°C
5 ppm/°C
25 ppm/°C
10 ppm/°C
5 ppm/°C
25 ppm/°C
10 ppm/°C
5 ppm/°C
25 ppm/°C
10 ppm/°C
5 ppm/°C
TPI-0402
10Ω to 205KΩ
49.9Ω to 12KΩ*
49.9Ω to 3KΩ*
2Ω to 1MΩ
4.7Ω to 332KΩ*
24.9Ω to 15KΩ*
1Ω to 2MΩ
4.7Ω to 500KΩ*
24.9Ω to 30KΩ*
TPI-0603
Specifications
Maximum Working Voltage
0402
0603
0805 (low ohms)
0805 (standard)
1206, 2010, 2512
Rated Power (70°C)
0402, 0603
0805 (low ohms)
0805 (standard)
1206
2010
2512
25 VDC
50 VDC
√P*R
100 VDC
150 VDC
63mW
250mW
100mW
125mW
250mW
500mW
TPI-0805
TPI-1206
1Ω to 2.5MΩ
4.7Ω to 1MΩ*
24.9Ω to 50KΩ*
TPI-2010
1Ω to 3MΩ
4.7Ω to 1MΩ*
24.9Ω to 100KΩ*
1Ω to 3MΩ
4.7Ω to 1MΩ*
24.9Ω to 100KΩ*
25 ppm/°C
10 ppm/°C
5 ppm/°C
TPI-2512
Ordering Information
Example: 97.6Ω, 0.5% 1206 resistor
TPI -1206 - 97R6 D
Thin-film
Wraparound
Wraparound
Nickel barrier
100% Matte Tin
1206*
2010*
2512*
Tolerance:
T = 0.01%†
A = 0.05%†
B = 0.1%
D = 0.5%
F = 1%
Form factor
0402*
0603*
0805*
*Add “V” for 5PPM†
*Add “N” for 10PPM†
Resistance value:
The first three digits are significant
values. The fourth is the number of
zeros following. The ‘R’ indicates a
decimal point for values less than 10Ω
† Available as Special Order Only
50 Schoolhouse Lane
Portsmouth, RI 02871
Tel (401) 683-9700
Fax (401) 683-5571
e-mail: ims@ims-resistors.com
http://www.ims-resistors.com
TPI ver.9 1/13
Specifications subject to change without notice.
stm32/stm8
