Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 980-1
Shielded Power Inductors – XFL6012
• High current, very low DCR, soft saturation
• Very low profile – 1.2 mm maximum
• AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
Core material
Composite
Core and winding loss
See www.coilcraft.com/coreloss
Environmental
RoHS compliant, halogen free
Terminations
RoHS compliant tin-silver over copper. Other terminations
available at additional cost.
Weight
0.20 – 0.22 g
Ambient temperature
–40°C to +125°C with (40°C rise)
Irms
current.
Maximum part temperature
+165°C (ambient + temp rise).
Derating.
Storage temperature
Component: –40°C to +165°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat
Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL)
1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF)
26,315,789 hours
Packaging
750/7″ reel; 3000/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 12 mm pocket spacing, 1.4 mm pocket depth
PCB washing
Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See
Doc787_PCB_Washing.pdf.
Inductance
2
±20% (µH)
0.18
0.39
0.60
0.80
1.0
DCR (mOhms)
3
typ
max
7.06
8.12
10.5
12.1
13.5
15.5
18.0
20.7
21.9
25.2
SRF typ
4
(MHz)
130
83
65
58
52
Isat
(A)
5
10% drop 20% drop
10.1
13.7
6.7
9.9
5.7
8.9
4.2
7.6
3.5
6.3
Irms
(A)
6
20°C rise 40°C rise
10.1
13.2
8.9
12.5
8.3
11.2
6.7
9.4
6.0
8.0
Part
XFL6012-181ME_
XFL6012-391ME_
XFL6012-601ME_
XFL6012-801ME_
XFL6012-102ME_
number
1
30% drop
14.3
11.2
10.4
9.3
8.0
1. When ordering, please specify
termination
and
packaging
codes:
XFL6012-801MEC
Termination: E
= RoHS compliant tin-silver over copper.
Special order:
T
= RoHS tin-silver-copper (95.5/4/0.5) or
S
= non-RoHS tin-lead (63/37).
Packaging: C
= 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel).
B
= Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D
= 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3000 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings.
Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms
Testing
Irms
testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
US
+1-847-639-6400 sales@coilcraft.com
UK
+44-1236-730595 sales@coilcraft-europe.com
Taiwan
+886-2-2264 3646 sales@coilcraft.com.tw
China
+86-21-6218 8074 sales@coilcraft.com.cn
Singapore
+ 65-6484 8412 sales@coilcraft.com.sg
Document 980-1
Revised 10/09/17
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Document 980-2
Shielded Power Inductors – XFL6012
L vs Current
Inductance (µH)
0.30
0.25
0.20
0.15
0.05
0
0.10
L vs Frequency
10
0.18 µH
Inductance (µH)
0
1
2
3
4
5
Current (A)
6
7
8
9
10
11
12
13 14
1
1.0 µH
0.80 µH
0.60 µH
0.39 µH
Inductance (µH)
0.6
0.5
0.4
0.3
0.2
0.1
0
0.39 µH
0.18 µH
0.1
0.1
1
10
100
0
1
2
3
4
5
Current (A)
6
7
8
9
10
11
12 13
Frequency (MHz)
Inductance (µH)
1.0
0.8
0.6
0.4
0.2
0
0
1
2
3
4
5
6
7
8
9
10
11
0.250 ±0.008
6,36 ±0,2
0.60 µH
XXX
0.258 ±0.008
6,56 ±0,2
Current (A)
Inductance (µH)
1.2
1.0
0.8
0.6
0.4
0.2
0
Dash
number
Indicates orientation
of terminations
0.047
max
*
1,2
0.80 µH
0.051 ±0.002
1,30 ±0,05
0.110 ±0.01
2,79 ±0,25
0
1
2
3
4
0.0024
0,060
0.197
typ
5,0
Current (A)
5
6
7
8
9
10
0.159
4,04
*
For optional tin-lead and tin-silver-
Inductance (µH)
1.6
1.2
copper terminations, dimensions
are for the mounted part.
Dimensions before mounting can be
an additional 0.005 inch / 0.13 mm.
0.216
5,50
1.0 µH
0.8
0.4
0
0
1
2
3
4
5
6
7
8
9
10
0.056
1,43
Current (A)
Recommended
Land Pattern
Dimensions are in inches
mm
US
+1-847-639-6400 sales@coilcraft.com
UK
+44-1236-730595 sales@coilcraft-europe.com
Taiwan
+886-2-2264 3646 sales@coilcraft.com.tw
China
+86-21-6218 8074 sales@coilcraft.com.cn
Singapore
+ 65-6484 8412 sales@coilcraft.com.sg
Document 980-2
Revised 10/09/17
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
