The LPC1549 Motor Control Kit (Teknic Permanent Magnet Motor) includes: LPC1500 Xpresso board with an LPC1549 ARM Cortex-M3 based microcontroller, a motor control Rev. B board and a 24V Power supply and cables。
文档内容节选
LPC1549 Motor Control Kit Teknic Permanent Magnet Motor Quick Start Guide The LPC1549 Motor Control Kit Teknic Permanent Magnet Motor includes LPC1500 Xpresso board with an LPC1549 ARM CortexM3 based microcontroller a motor control Rev B board and a 24V Power supply and cables To get started with using the kit Connect the LPC1500 Xpresso board to the Motor control board see diagram below for details on how to connect the pins from Xpresso board to the motor control board Connect the TeknicPerman......
-
RISC-V嵌入式系统开发
-
SOC系统级芯片设计实验
-
云龙51单片机实训视频教程（王云，字幕版）
-
2022 Digi-Key KOL 系列: 你见过1GHz主频的单片机吗？Teensy 4.1开发板介绍
-
TI 新一代 C2000™ 微控制器：全方位助力伺服及马达驱动应用
-
MSP430电容触摸技术 - 防水Demo演示
-
PIC单片机控制的遥控防盗报警器电路
-
使用ESP8266从NTP服务器获取时间并在OLED显示器上显示
-
带有短路保护系统的5V直流稳压电源电路图
-
如何构建一个触摸传感器电路
-
如何调制IC555振荡器
-
基于ICL296的大电流开关稳压器电源电路
