Automatic Measuring in Standard M/PAL using a M/NTSC Video Analyzer UAF orVideo Measurement System VSA1. Select standard M/PAL. Insert into SAF or SFF Memory Card with testsignalsaccording to NTC Combination and NTC Composite Signal or create these signalsusing SIGNAL EDIT (see also page 3).2. Insert signals into Vertical Blanking Interval:3. Change subcarrier frequency in SAF/SFF from M/PAL to 3.579545 MHz acc. toM/NTSC .4. You now may measure with the output signal of the SAF or SFF all parameterssiutable to NTCCOMBI.ULC and NTCCOMPO.ULC in the standard M/PAL. But youshould remember that the subcarrier frequency is the one of M/NTSC (the offset of2511 Hz does not influence the measurement):