读写PIC16F877內部EEPROM的实例

2016-11-17 来源：eefocus

//********************************************写入1字节到eerom****************************////// void write_eprom(unsigned char date,unsigned char addr) { while(wr==1);//等待写周期完成 eeadr=addr;//准备要写入的地址 eedata=date;//准备要写入的数据 eepgd=0;//to data memory wren=1;//允许写 gie=0; eecon2=0x55; eecon2=0xaa; wr=1;//启动写周期 while(wr==1);//等待写周期完成 gie=1; wren=0; } //************************************************读取设定值******************************************** unsigned char read_eprom(unsigned char addr) { eeadr=addr; eepgd=0; rd=1; return eedata; }

LIST P=16f877
  ＃i nclude
;
;- RAM LOCATIONS------
;
; Reserve RAM location 0x70 for ICD
;
Data_EE_Addr   equ   0X71
Data_EE_Data   equ   0X72

;--------VECTORS------------

         org   0x0
  nop
         goto START

;-------PROGRAM--------------

         org 0X20
START
        call   INIT
;
;----   Test the WRITE EEPROM Routine ----
;
  movlw 0x0
  movwf Data_EE_Addr
  movlw '0'    ; Load a ASCII code '0' to W
  movwf Data_EE_Data
EE_Write
  call WRITE_EEPROM
  incf Data_EE_Data,F ; 0x30+ N
  incf Data_EE_Addr,F ; Point to next EEPROM Address
  btfss Data_EE_Addr,5 ; Write 32 bytes ?
  goto EE_Write
;
;----   Test the READ EEPROM Routine ----
;
  movlw 0x20  ; Get back EEPROM data to RAM with start addr at 0x20
  movwf FSR
;
  movlw 0x0  ; Point to EEPROM start address at 0x00
  movwf Data_EE_Addr
EE_Read
  call READ_EEPROM ; Read EEPROM data with curent address to W registre
  movwf INDF  ; move W --> RAM
;
  incf FSR,F
  incf Data_EE_Addr,F ; Point to next EEPROM Address
  btfss Data_EE_Addr,6 ; Read 32 bytes ?
  goto EE_Read
;
        GOTO   $
;
;------ INTERNAL EEPROM READ ------
;
READ_EEPROM
  banksel EEADR
  movf Data_EE_Addr,W  ; Load EEPROM Address into Pointer
  movwf EEADR
;
;       bcf     INTCON,GIE
  banksel EECON1
  bcf EECON1,EEPGD
  bsf EECON1,RD
;
  banksel EEDATA
  movf EEDATA,W
;       bsf     INTCON,GIE
;
  banksel PORTA
  return
;
;----INTERNAL EEPROM WRITE-----
;
WRITE_EEPROM
  banksel EEADR
  movf Data_EE_Addr,W  ; Load EEPROM Address & Data into Register
  movwf EEADR
  movf Data_EE_Data,W
  movwf EEDATA
;
  banksel EECON1
  bcf EECON1,EEPGD  ; Selected Data EEPROM for Writing
  bsf EECON1,WREN  ; Enable write function

; bcf INTCON,GIE ; Disable Interrupt

  movlw 0x55   ; Write Sequence control
  movwf EECON2
  movlw 0xAA
  movwf EECON2

  bsf EECON1,WR  ; Start EEPROM write operation
;
;  bsf INTCON,GIE  ; Enable Interrupt (If used interrupt )
  bcf EECON1,WREN  ; Disable write EEPROM
;
  btfsc EECON1,WR  ; Waiting for writing completed (4mS)
  goto $-1   ; During write period, must hold both EEADR & EEDATA until complete
;
  banksel PORTA
  return
;
;---------INITIAL----------------
INIT
        BCF     PIR2,EEIF
  banksel PIE2
          BCF     PIE2,EEIE
         RETURN
;--------------------------------
            END

进入单片机查看更多内容>>

PIC16F877 內部EEPROM

上一篇:PIC的配置位

下一篇:用PIC16F877A单片机驱动按键控制8个数码管的显示的C程序

热门新闻