STM32L151C8周期性从待机模式唤醒（RTC Wakeup Timer）

#include 'stm32l1xx.h'

#include 'system_stm32l1xx.h'

#include 'OLED.h'

#include 'delay.h'

void RtcWakeUpConfig(void);

u8 RtcInit(void);

u8 RtcConfig(void);

int main()

{

    DelayInit();    //延时初始化

    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE); //使能PWR时钟

    if(PWR_GetFlagStatus(PWR_FLAG_SB))  //从待机模式唤醒 

    {

        PWR_ClearFlag(PWR_FLAG_SB);

        PWR_ClearFlag(PWR_FLAG_WU);

    }

    OLED_Init();

    RtcInit();

    while(1)    

    {

        OLED_8x16StrP(0,0,'Runing...');         //液晶提示在运行中

        DelayS(2);                              //延时2秒

        RtcWakeUpConfig();                      //RTC wakeup 配置：间隔500ms自动唤醒

//      PWR_WakeUpPinCmd(PWR_WakeUpPin_1,ENABLE);  //Periodic auto-wakeup不需要外部唤醒管脚，故不需要这句

        PWR_EnterSTANDBYMode();   //进入待机（STANDBY）模式     

    }

}

void RtcWakeUpConfig(void)

{

    RTC_WakeUpCmd(DISABLE);

    RTC_ClearFlag(RTC_FLAG_WUTF);

    RTC_WakeUpClockConfig(RTC_WakeUpClock_RTCCLK_Div8);     //选择时钟为外部32.768KHz 8分频

    RTC_SetWakeUpCounter(2047);         //间隔500ms

    RTC_ClearITPendingBit(RTC_IT_WUT);

    RTC_ITConfig(RTC_IT_WUT,ENABLE);    //需要使能中断，不需要中断函数

    RTC_WakeUpCmd(ENABLE);

}

u8 RtcInit(void)

{

    //检查是不是第一次配置时钟

    u8 flag = 0;

    if (RTC_ReadBackupRegister(RTC_BKP_DR0) != 0x32F2)      //从指定的后备寄存器中读出数据:读出了与写入的指定数据不相乎

    {

        /* RTC configuration  */

        flag = RtcConfig();

        if(flag == 0)

        {

            RTC_WriteBackupRegister(RTC_BKP_DR0, 0x32F2);

        }

        else

            return flag;

    }

    else

    {

        /* Enable the PWR clock */

        RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

        /* Allow access to RTC */

        PWR_RTCAccessCmd(ENABLE);

        /* Wait for RTC APB registers synchronisation */

        RTC_WaitForSynchro();

    }

    return 0; //ok

}   

/**

  * @brief  Configure the RTC peripheral by selecting the clock source.

  * @param  None

  * @retval None

  */

u8 RtcConfig(void)

{

    /* Enable the PWR clock */

    RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);

    /* Allow access to RTC */

    PWR_RTCAccessCmd(ENABLE);

    /* Enable the LSE OSC */

    RCC_LSEConfig(RCC_LSE_ON);

    /* Wait till LSE is ready */ 

    u32 temp = 0;

    while(RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)

    {

        temp++;

        delay_ms(10);

        if(temp >= 250) return 1;//初始化时钟失败,晶振有问题，32768晶振起振极限时间1-5S 

    }

    /* Select the RTC Clock Source */

    RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);

    /* Enable the RTC Clock */

    RCC_RTCCLKCmd(ENABLE);

    /* Wait for RTC APB registers synchronisation */

    RTC_WaitForSynchro();

    /* Configure the RTC data register and RTC prescaler */

    RTC_InitTypeDef RTC_InitStructure;

    RTC_InitStructure.RTC_AsynchPrediv = 0x7F;

    RTC_InitStructure.RTC_SynchPrediv = 0xFF;

    RTC_InitStructure.RTC_HourFormat = RTC_HourFormat_24;

    RTC_Init(&RTC_InitStructure);

    return 0;

}

非待机模式，RTC Wakeup timer中断配置及中断处理

void RTC_IRQConfig(void)

{

    NVIC_InitTypeDef NVIC_InitStructure; 

    EXTI_InitTypeDef EXTI_InitStructure;

    /* EXTI configuration *******************************************************/

    EXTI_ClearITPendingBit(EXTI_Line20);

    EXTI_InitStructure.EXTI_Line = EXTI_Line20;

    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;

    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;

    EXTI_InitStructure.EXTI_LineCmd = ENABLE;

    EXTI_Init(&EXTI_InitStructure);

    /* Enable the RTC Wakeup Interrupt */

    NVIC_InitStructure.NVIC_IRQChannel = RTC_WKUP_IRQn;

    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;

    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;

    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;

    NVIC_Init(&NVIC_InitStructure);  

}

void RTC_WKUP_IRQHandler(void)

{

    if(RTC_GetITStatus(RTC_IT_WUT) != RESET) 

    {

        EXTI_ClearITPendingBit(EXTI_Line20); 

        PWR_RTCAccessCmd(ENABLE);//如果之前禁止了，要重新打开

        RTC_ClearITPendingBit(RTC_IT_WUT);

        PWR_RTCAccessCmd(DISABLE);//可以再关上

        GPIO_ToggleBits( GPIOB, GPIO_Pin_4 );

    }

}