MICROPROCESSOR
CORE MODULE
RABBITCORE®
RCM3400 SERIES
The RabbitCore RCM3400 series, featuring the Rabbit® 3000
microprocessor, is designed for embedded control and
monitoring applications requiring analog functionality. Its
small size and ease of use when paired with Dynamic C® allow
engineers to develop a control and monitoring solution for
many of today’s embedded applications.
The Ethernet-ready RCM3400 series comes pre-assigned with
a MAC ID, along with a development board 10Base-T reference
design. Built-in low EMI features, including a clock spectrum
spreader, practically eliminate EMI problems, helping to pass
CE and RF emissions tests.
The compact, analog-enabled RabbitCore is designed for
embedded applications that require analog functionality
Rabbit hardware and Dynamic C are designed in a
complementary fashion for maximum performance and
ease of use in embedded systems. The additional software
components in Dynamic C allow you to add functionality for
embedded application customization.
BENEFITS
– Rabbit 3000 microprocessor at 30 MHz
– Up to 512K Flash/512K SRAM
– 8 channel 12-bit A/D with programmable gain
– 47 digital I/O and 5 serial ports (IrDA, HDLC,
asynch, SPI)
– MAC ID installed
– Compact size simplifies integration
– Ready-made platform for fast time-to-market, up
to 3 months of design integration time savings
– Low-cost embedded microprocessor module
APPLICATION EXAMPLE
Ethernet
REMOTE
MONITORING PC
DEVICE CLOUD
YACHT AUTOMATION
Cellular/VPN
RABBITCORE®
RCM3400
GPS
Module
RS-232
Cellular
Router
RELATED PRODUCTS
AC/DC
Relay
Battery
Voltage
Refridgeration
Temperature Sensor
Water Level
Sensor
RabbitCore®
RCM3000
Series
RabbitCore®
RCM3100
Series
RabbitCore®
RCM4300
Series
RabbitCore®
RCM3600
Series
Dynamic C®
SPECIFICATIONS
FEATURE
RCM3400
Rabbit® 3000 at 30 MHz
512K
512K
I
RCM3410
MICROPROCESSOR
FLASH MEMORY
SRAM
BACKUP BATTERY
ANALOG INPUTS
- A/D CONVERTER RESOLUTION
- A/D CONVERSION TIME
(INCLUDING 120 ΜS RAW COUNT AND DYNAMIC C)
256K
256K
Connection for user-supplied backup battery (to support RTC and SRAM)
8 channels single-ended or 4 channels differential Programmable gain 1, 2, 4, 5, 8, 10, 16, and 20 V/V
12 bits (11 bits single-ended)
180 μs
47 parallel digital I/0 lines:
• 41 configurable I/O
• 3 fixed inputs
• 3 fixed outputs
Startup mode (2), reset in, CONVERT
Status, reset out, VREF
Can be configured for 8 data lines and 6 address lines (shared with parallel I/O lines), plus I/O read/write
5 shared high-speed, CMOS-compatible ports:
• All 5 configurable as asynchronous, 3 as clocked serial (SPI), and 2 as SDLC/HDLC
• 1 asynchronous serial port dedicated for programming
• Support for MIR/SIR IrDA transceiver
Maximum asynchronous baud rate = CLK/8
A slave port allows the RCM3400 to be used as an intelligent peripheral device slaved to a master processor,
which may either be another Rabbit 3000 or any other type of processor
Yes
Ten 8-bit timers (6 cascadable), one 10-bit timer with 2 match registers
Yes
10-bit free-running counter and four pulse-width registers
2-channel input capture can be used to time input signals from various port pins
2-channel quadrature decoder accepts inputs from external incremental encoder modules
3.0–3.45 VDC @ 29.4 MHz, 2.8–3.45VDC @ 14.7 MHz 97 mA @ 3.3V, 29.4 MHz; 57 mA @ 3.0V, 14.7 MHz
-40° C to +85° C
5% to 95%, non-condensing
Two 2 × 17, 1.27 mm pitch
1.160” × 1.375” × 0.31” (29.5 mm ×34.9 mm × 7.9 mm)
GENERAL-PURPOSE I/O
ADDITIONAL INPUTS
ADDITIONAL OUTPUTS
AUXILIARY I/O BUS
SERIAL PORTS
SERIAL RATE
SLAVE INTERFACE
REAL-TIME CLOCK
TIMERS
WATCHDOG/SUPERVISOR
PULSE-WIDTH MODULATORS
INPUT CAPTURE
QUADRATURE DECODER
POWER
OPERATING TEMPERATURE
HUMIDITY
CONNECTORS
BOARD SIZE
PART NUMBERS
20-101-0561
20-101-0562
DESCRIPTION
RCM3400
RCM3410
DIGI SERVICE AND SUPPORT /
You can purchase with confidence knowing that Digi
is always available to serve you with expert technical support and our industry
leading warranty. For detailed information visit www.digi.com/support.
© 1996-2017 Digi International Inc. All rights reserved.
All trademarks are the property of their respective owners.
91001604
C3/717
DIGI INTERNATIONAL WORLDWIDE HQ
877-912-3444 / 952-912-3444 /
www.digi.com
DIGI INTERNATIONAL GERMANY
+49-89-540-428-0
DIGI INTERNATIONAL JAPAN
+81-3-5428-0261 / www.digi-intl.co.jp
DIGI INTERNATIONAL SINGAPORE
+65-6213-5380
DIGI INTERNATIONAL CHINA
+86-21-50492199 / www.digi.com.cn
WindowsCE
