Sil-Pad 400
®
The Original Sil-Pad Material
Features and Benefits
• Thermal impedance:
1.13°C-in
2
/W (@50 psi)
• Original Sil-Pad material
• Excellent mechanical and physical
characteristics
• Flame retardant
PROPERTY
Color
Reinforcement Carrier
Thickness (inch) / (mm)
Hardness (Shore A)
Breaking Strength (lbs/inch) / (kN/m)
Elongation (%45° to Warp and Fill)
Tensile Strength (psi) / (MPa)
Continuous Use Temp (°F) / (°C)
ELECTRICAL
Dielectric Breakdown Voltage (Vac)
Dielectric Constant (1000 Hz)
Volume Resistivity (Ohm-meter)
Flame Rating
THERMAL
Thermal Conductivity (W/m-K)
THERMAL PERFORMANCE vs PRESSURE
Pressure (psi)
TYPICAL PROPERTIES OF SIL-PAD 400
IMPERIAL VALUE
Gray
Fiberglass
0.007, 0.009
85
30
54
3000
-76 to 356
3500, 4500
5.5
10
11
METRIC VALUE
Gray
Fiberglass
0.178, 0.229
85
5
54
20
-60 to 180
3500, 4500
5.5
10
11
TEST METHOD
Visual
—
ASTM D374
ASTM D2240
ASTM D1458
ASTM D412
ASTM D412
—
ASTM D149
ASTM D150
ASTM D257
U.L. 94
ASTM D5470
V-O
0.9
10
6.62
8.51
1.82
2.34
25
5.93
7.62
1.42
1.83
V-O
0.9
50
5.14
6.61
1.13
1.45
100
4.38
5.63
0.82
1.05
200
3.61
4.64
0.54
0.69
Sil-Pad 400 is a composite of silicone rubber
and fiberglass.The material is flame retardant
and is specially formulated for use as a
thermally conductive insulator.The primary
use for Sil-Pad 400 is to electrically isolate
power sources from heat sinks.
Sil-Pad 400 has excellent mechanical and
physical characteristics. Surfaces are pliable
and allow complete surface contact with
excellent heat dissipation. Sil-Pad 400 actually
improves its thermal resistance with age.
The reinforcing fiberglass provides excellent
cut-through resistance. In addition, Sil-Pad 400
is non-toxic and resists damage from
cleaning agents.
TO-220 Thermal Performance (°C/W) 0.007"
TO-220 Thermal Performance (°C/W) 0.009"
Thermal Impedance (°C-in
2
/W) 0.007" (1)
Thermal Impedance (°C-in /W) 0.009" (1)
2
1) The ASTM D5470 test fixture was used.The recorded value includes interfacial thermal resistance.These values are provided for
reference only. Actual application performance is directly related to the surface roughness, flatness and pressure applied.
Typical Applications Include:
• Power supplies
• Power semiconductors
• Automotive electronics
• Motor controls
Configurations Available:
• Sheet form, die-cut parts and roll form; with or without pressure sensitive adhesive
Building a Part Number
SP400
–
0.007
– AC – 12/250 –
NA
Standard Options
Section E
NA = Selected standard option. If not selecting a standard
option, insert company name, drawing number, and
revision level.
_ _ _ = Standard configuration dash number,
1212 = 12" x 12" sheets, 12/250 = 12" x 250' rolls, or
00 = custom configuration
AC = Adhesive, one side; AC2 = Adhesive, two sides; or
00 = no adhesive
Standard thicknesses available: 0.007", 0.009"
SP400 = Sil-Pad 400 Material
Section A
Section B
Section C
Note: To build a part number, visit our website at www.bergquistcompany.com.
Sil-Pad
®
U.S. Patents 4,574,879; 4,602,125; 4,602,678; 4,685,987; 4,842,911 and others
www.bergquistcompany.com
The Bergquist Company -
North American Headquarters
18930 West 78th Street
Chanhassen, MN 55317
Phone: 800-347-4572
Fax: 952-835-0430
The Bergquist Company -
European Headquarters
Bramenberg 9a, 3755 BT Eemnes
Netherlands
Phone: 31-35-5380684
Fax: 31-35-5380295
The Bergquist Company - Asia
Room 15, 8/F Wah Wai Industrial Centre
No. 38-40, Au Pui Wan Street
Fotan, Shatin, N.T. Hong Kong
Ph: 852.2690.9296
Fax: 852.2690.2344
All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_SP_400_12.08
Section D
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Bergquist Company
:
SP400-0.007-00-05 SP400-0.007-00-104 SP400-0.007-00-51 SP400-0.007-00-54 SP400-0.007-00-58 SP400-
0.007-00-90 SP400-0.009-00-02 SP400-0.009-00-03 SP400-0.009-00-04 SP400-0.009-00-05 SP400-0.009-00-09
SP400-0.009-00-11 SP400-0.009-00-51 SP400-0.009-00-54 SP400-0.009-00-58 SP400-0.009-00-90 SP400-0.009-
AC-54 SP400-0.009-00-45 3223-07FR-50 SP400-0.009-AC-102 SP400-0.009-AC-1212 SP400-0.007-00-1212
SP400-0.009-00-1212 SP400-0.007-AC-53 SP400-0.007-00-92 7403-09FR-85 SP400-0.007-AC-1212 7403-09FR-26
