The AMS5010 is a two-terminal band-gap voltage reference diode, which provides a fixed 1.22V output voltage. This device
features a low output impedance and low temperature coefficient, operating over a 50µA to 5mA current range. The
AMS5010 is ideal for usage in battery power instrument application as well as a reference for CMOS A/D converters.
The AMS5010NT, MT, LN, HN, GH grades are specified operational over a temperature range of 0°C to 70°C while
AMS5010LT, KT, JT grades are rated over the full -55°C to +125°C temperature range. The AMS5010 is available in TO-92
and TO-52 (metal can) packages.
ORDERING INFORMATION:
MAX.
PACKAGE TYPE
TO-52
AMS5010NT
AMS5010MT
-
-
-
AMS5010LT
AMS5010KT
AMS5010JT
OPERATING
TEMPERATURE RANGE
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
-55°C to +125°C
-55°C to +125°C
-55°C to +125°C
TO-92
TEMPCO
-
5ppm/°C
-
10ppm/°C
25ppm°C AMS5010LN
50ppm/°C AMS5010HN
100ppm°C AMS5010GN
-
25ppm/°C
-
50ppm/°C
-
100ppm°C
PIN CONNECTIONS
TO-92
Plastic Package (N)
+
2
-
1
TO-52
Metal Can Package (T)
2
+
1
-
Bottom View
Bottom View
Advanced Monolithic Systems, Inc.
www.advanced-monolithic.com
Phone (925) 443-0722
Fax (925) 443-0723
AMS5010
ABSOLUTE MAXIMUM RATINGS
Reverse Current
Forward Current
Operating Temperature Range
NT, MT, LN, HN, GN
LT, KT, JT
10mA
10mA
0°C to 70°C
-55°C to +125°C
Storage Temperature TO-92 package
Storage Temperature TO-52 package
Lead Temperature (Soldering 10 sec.)
Maximum Power Dissipation (at 25°C)
TO-52
TO-92
-65°C to +150°C
-65°C to +200°C
260°C
750mW
600mW
ELECTRICAL CHARACTERISTICS
Electrical Characteristics at I
R
= 500
µA,
and T
A
= +25°C unless otherwise specified.
Parameter
Reference Voltage
Reference Current (Note 3)
Reverse Current
Dynamic Output Impedance
To rated specs.
I
R
= 100
µA
I
R
= 500
µA
RMS Noise Voltage
(Note 4)
Temperature Coefficient
(Note 5)
AMS5010G – J
AMS5010H – K
AMS5010L
AMS5010M
AMS501N
I
R
= 500
µA,
10Hz
≤
f
≤
10kHz
50µA
≤
I
R
≤
5mA
T
MIN
≤
T
A
≤
T
MAX
30
25
10
5
3
100
50
25
10
5
ppm/°C
ppm/°C
ppm/°C
ppm/°C
ppm/°C
Conditions
I
R
= 100
µA
Min
1.20
50
50
AMS5010
Typ
1.220
100
Max
1.25
5000
100
Units
V
µA
µA
Ω
Ω
µV
.6
.6
5
2
Note 1:
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics
.
The
guaranteed specifications apply only for the test conditions listed.
Note 2:
For elevated temperature operation, T
j
max is
≤+150°C
Thermal Resistance
ϕ
JA
(junction to ambient)
TO-92
170°C/W (0.125” leads)
TO-52
140°C/W
Note 3:
Optimum performance is obtained at currents below 500µA. For current operation below 200µA, stray shunt capacitances should be limited to 20pF or
increased to 1µF. If strays can not be avoided, a shunt capacitor of at least 1000pF is recommended.
Note 4:
Guaranteed but not 100% production tested. These limits are not used to calculate average outgoing quality levels.
Note 5:
The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating T
stm32/stm8
