QorIQ Qonverge Platform
QorIQ Qonverge BSC9131 for
Femtocell Base Station Solutions
A new dimension in wireless processing
Target Applications
Femtocell: Home or small office cellular
base stations supporting the following
standards:
• LTE-FDD/TDD
• WCDMA (HSPA+)
• CDMA2K
• TD-SCDMA
QorIQ Qonverge BSC9130 and BSC9131 Processors
QorIQ Qonverge BSC9131 Processor
StarCore SC3850
DSP Core
32 KB L1
I-Cache
32 KB L1
D-Cache
e500 Core
Built on
Power Architecture
®
32 KB
I-Cache
Coherency
Module
32 KB
D-Cache
256 KB
L2 Cache
32-bit
DDR3/3L
Memory
Controller
MAPLE-B2F
Baseband
Accelerator
LTE/UMTS/CDMA2K
RF Interface
(JESD207/ADI)
and MaxPHY
Overview
The QorIQ Qonverge BSC9131 processor is
a highly integrated device that targets evolving
femto and enterprise femto applications. The
BSC9131 combines Power Architecture e500
®
cost-effective, integrated solution that handles
all the digital baseband processing required for
femtocells.
The programmable BSC9131 device, targeted at
LTE/FDD/TDD, WCDMA (HSPA+) and CDMA2K,
supports multiple air interface standards and can
support two concurrent standards.
and StarCore SC3850 core technologies with
MAPLE-B2F baseband acceleration processing,
addressing the need for a high-performance,
512 KB
L2 Cache
Multicore Fabric
4x eSPI
2x DUART
2x I
2
C
GPIO
USIM
IFC
eSDHC
2x PWM
Clocks/Reset
DMA
Security
Engine
V4.4
USB
2.0
Ethernet
IEEE
®
1588
1x GE
1x GE
QorIQ Qonverge Features
The BSC9131 is a highly integrated device combining Power, StarCore
and MAPLE architectures. The device includes the following features:
Core
DSP
Baseband
Acceleration
Memory
• Power Architecture
®
subsystem including one e500 processor and 256 KB shared
L2 cache
• StarCore SC3850 DSP subsystem including 512 KB private L2 cache
• MAPLE-B2F multi-accelerator platform engine supports functions that enable
LTE-FDD/TDD, WCDMA (HSPA+) and CDMA2K wireless standards
• DDR3 memory interface with 32-bit data width (40 bits including ECC), up to
800 MHz data rate
• Integrated flash controller for NOR, NAND and FPGA support
• Dedicated security engine featuring trusted boot
• Antenna interface controller supporting three industry standard JESD207/three
custom ADI RF interfaces (two dual port and one single port)
• Two pulse width modulators (PWM) for control of external components
• Three MAXIMs MaxPhy serial interfaces
Security
RF Interface
Connectivity
• Two triple-speed Gigabit-Ethernet controllers featuring network acceleration including
IEEE
®
Std 1588v2™ hardware support
• USB 2.0 host and device controller
• DMA controller with four bidirectional channels that serves both Power Architecture
cores and DSP domains
• UART, SPI, eSDHC, USIM and I
2
C controllers
• GPIO, 16 32-bit timers
Freescale will provide commercial L1 and
transport software. L2, L3 will be provided
through our partner stack vendors:
• LTE-FDD/TDD and WCDMA (HSPA+) L1
software–licensed by Freescale
• L2/L3 software for LTE-FDD/TDD and
WCDMA (HSPA+)–via partners
• Development tools and operating system
software through Freescale and its
ecosystem partners
BSC9131 Reference Design Board
For more information about the QorIQ Qonverge BSC913x family,
visit
freescale.com/QorIQQonverge
Freescale, the Freescale logo, QorIQ and StarCore are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.
QorIQ Qonverge is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their
respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are
trademarks and service marks licensed by Power.org. © 2012 Freescale Semiconductor, Inc.
Document Number: QORIQPSC9131FS REV 2
