Embedded Device Server
Easily network-enable virtually any serial device
Flexible, well-developed IP protocol stack
Ethernet RJ45 (10Base-T) connector on the board
TTL serial interface
Two serial ports
Accepts 5V
DC
regulated input power
HTTP, Serial, Telnet and SNMP management
Flash ROM for easy software upgrades
Custom protocol support available
Design Ethernet Connectivity into Your Products
Quickly and Economically
The Lantronix Micro is a board-level product for
OEM users who want to embed proven mainstream
Ethernet connectivity into their products quickly
and economically.
Building Ethernet connectivity into a product is no
The Micro brings over a decade of networking
simple task. It requires a significant investment in
experience, rock-solid IP firmware and extensive
hardware and software integration – often in areas
applications support to industrial and commercial
outside of core competencies. So why build it yourself
environments.
when there is a cost-effective alternative?
Measuring only 1.6 in x 1.9 in, the Micro can easily fit
Lantronix embedded device networking products
into almost any size serial device that would benefit
provide proven, integrated hardware and software
from network connectivity. A TTL connector provides
solutions for manufacturers who want to add Ethernet
the serial interface, and an RJ45 (10BASE-T) is available
connectivity to their products.
for Ethernet access. The Micro includes the same IP
Device networking starts with a Device Server .
These amazing products allow most any device with
a serial port (TTL) to connect to Ethernet networks
quickly and cost-effectively. Device Servers include
™
all of the elements needed for device networking
a processor, real-time operating system (RTOS),
a robust TCP/IP stack, a web server and a network
connection. All the connected product needs is a
header, providing connections to power and a TTL
serial port.
protocol stack found on the other Lantronix products.
Embedded Device Server
™
Micro
Board Layout and Pinouts
LEDs
(CON 4)
Reset
Switch
Features
Protocols
ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, TFTP and HTTP
Networking Interface
RJ45
(10Base-T)
Ethernet
RJ45
(CON2)
Drill 3
1
3
5
7
9
11
Micro
Serial Interface
TTL level
(Asynchronous)
Data Rates
300 bps to 115.2 Kbps
Serial Line Formats
Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Controls
DTR, RTS, CTS, DCD
Flow Control
XON/XOFF
(Software)
CTS/RTS
(Hardware)
Management
HTTP
SNMP
Serial login
Telnet login
System Software
Flash ROM standard:
downloadable from a TCP/IP
host
(TFTP)
or over serial port
Diagnostic LEDs
Transmit Data
Receive Data
Good Link
Compatibility
Ethernet: Version 2.0/IEEE 802.3
Power Requirements
5V
DC
+/-5% at ~ 200mA
Memory
Flash: 512K
RAM: 128K
NVRAM: 2K Bytes
Environmental
Standard Temperature
0° to 70° C (32° to 158° F)
Storage Temperature
-40° to 85° C (-40° to 185° F)
Physical Dimensions (L x W)
49.15 x 40 mm (1.935 x 1.575 in)
Mechanical drawing available at www.lantronix.com
Warranty
1-year limited warranty
Ordering Information
CON1 (2 x 6 Pins)
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Function
+5V
GND
RXA (Input)
TXA (Output)
RTSA (Output)
DTRA (Output)
CTSA (Input)
DCDA (Input)
R/V/A (Output)
RESET to be pulled low
RXB (Input – optional)
TXB (Output – optional)
TTL
(CON1)
Embedded Device Server
™
Drill 1
CON2 (RJ45)
Pin
1
2
3
4
5
6
7
8
Con1
TX+
TX-
RX+
NC
NC
RX-
NC
NC
Drill 2
CON3 (2 x 2 pins in place of RJ45)
Pin
1
2
3
4
Function
TX+
TX-
RX+
RX-
CON4 (2 x 4 pins in place of LEDs)
Pin
1
2
3
4
5
6
7
8
Function
+5V
+5V
LED2
LED1
+5V
+5V
LED3
LED “good link”
Contact your local Lantronix representative or Lantronix directly:
United States
sales@lantronix.com or call OEM sales support at 800-526-8764.
Asia Pacific Region
AsiaPacific_sales@lantronix.com
Europe
eu_sales@lantronix.com
Japan
japan_sales@lantronix.com
Latin America & Caribbean
la_sales@lantronix.com
Part Number and Description
CO-E1-00AAR
Micro with no RJ45 and LEDS, RoHS
CO-E1-11AAR
Micro Device Server, Ethernet, RoHS
CO-E1-IAP-R
Micro Industrial Protocol, RoHS
CO-E1M-00AAR
Micro with no RJ45 and LEDS, with MODBUS Firmware, RoHS
CO-E1M-11AAR
Micro with MODBUS Firmware, RoHS
CO-E2-00AB-R
Micro Generic, 2 Serial Port support with no RJ45 and LEDS, RoHS
CO-E2-113AAR
Micro, 2 Serial Port support and TTL Header on back of board, RoHS
CO-E2-11AAR
Micro with 2 Serial Port support, RoHS
CO-E2-12AA-R
Micro with no LEDS, but instead, Header Pins on the TTL side, RoHS
CO-E2-21ABR
Micro, Pin Header on TTL side instead of RJ45, RoHS
CO-E2-22AAR
Micro with 2 TTL Channels, RoHS
CO-E2-22AB-R
Micro with 2TTL Channel, RoHS
CO-E2-IAPR
Micro 2 Channel IAP, RoHS
|
USA
|
Tel: 800.526.8764
|
Fax: 949.450.7249
|
www.lantronix.com
15353 Barranca Parkway
|
Irvine
|
CA 92618
©2006, Lantronix, Inc. Lantronix is a registered trademark and Device Server is a trademark of Lantronix, Inc. All other trademarks are the property of their respective owners. Specifications subject to
change without notice. All rights reserved. 910-300 05/06 DGS2500
