Synchronous Controller with Margining, Tracking and PLL
厂商名称:Linear ( ADI )
厂商官网:http://www.analog.com/cn/index.html
下载文档型号 | LTC3770EG | LTC3770 | LTC3770EUH |
---|---|---|---|
描述 | Synchronous Controller with Margining, Tracking and PLL | Synchronous Controller with Margining, Tracking and PLL | Synchronous Controller with Margining, Tracking and PLL |
是否Rohs认证 | 不符合 | - | 不符合 |
厂商名称 | Linear ( ADI ) | - | Linear ( ADI ) |
零件包装代码 | SSOP | - | QFN |
包装说明 | SSOP, SSOP28,.3 | - | HVQCCN, LCC32,.2SQ,20 |
针数 | 28 | - | 32 |
Reach Compliance Code | _compli | - | _compli |
ECCN代码 | EAR99 | - | EAR99 |
模拟集成电路 - 其他类型 | SWITCHING CONTROLLER | - | SWITCHING CONTROLLER |
控制模式 | CURRENT-MODE | - | CURRENT-MODE |
最大输入电压 | 32 V | - | 32 V |
最小输入电压 | 4 V | - | 4 V |
标称输入电压 | 15 V | - | 15 V |
JESD-30 代码 | R-PDSO-G28 | - | S-PQCC-N32 |
JESD-609代码 | e0 | - | e0 |
长度 | 10.2 mm | - | 5 mm |
湿度敏感等级 | 1 | - | 1 |
功能数量 | 1 | - | 1 |
端子数量 | 28 | - | 32 |
最高工作温度 | 85 °C | - | 85 °C |
最大输出电流 | 4 A | - | 4 A |
封装主体材料 | PLASTIC/EPOXY | - | PLASTIC/EPOXY |
封装代码 | SSOP | - | HVQCCN |
封装等效代码 | SSOP28,.3 | - | LCC32,.2SQ,20 |
封装形状 | RECTANGULAR | - | SQUARE |
封装形式 | SMALL OUTLINE, SHRINK PITCH | - | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
峰值回流温度(摄氏度) | 235 | - | 235 |
认证状态 | Not Qualified | - | Not Qualified |
座面最大高度 | 2 mm | - | 0.8 mm |
表面贴装 | YES | - | YES |
切换器配置 | PUSH-PULL | - | PUSH-PULL |
技术 | CMOS | - | CMOS |
温度等级 | OTHER | - | OTHER |
端子面层 | Tin/Lead (Sn/Pb) | - | Tin/Lead (Sn/Pb) |
端子形式 | GULL WING | - | NO LEAD |
端子节距 | 0.65 mm | - | 0.5 mm |
端子位置 | DUAL | - | QUAD |
处于峰值回流温度下的最长时间 | 20 | - | 20 |
宽度 | 5.3 mm | - | 5 mm |