MB95F333HPMC-G-SNE2,MB95F333HPMC-G-SNE2 pdf中文资料,MB95F333HPMC-G-SNE2引脚图,MB95F333HPMC-G-SNE2电路-Datasheet-电子工程世界

文档预览

FUJITSU SEMICONDUCTOR

DATA SHEET

DS07–12629–1E

8-bit Microcontrollers

CMOS

MC-8FX MB95330H Series

MB95F332H/F332K/F333H/F333K/F334H/F334K

■

DESCRIPTION

MB95330H is a series of general-purpose, single-chip microcontrollers. In addition to a compact instruction

set, the microcontrollers of this series contain a variety of peripheral resources.

Note: F

MC is the abbreviation of FUJITSU Flexible Microcontroller.

■

FEATURES

• F

MC-8FX CPU core

Instruction set optimized for controllers

• Multiplication and division instructions

• 16-bit arithmetic operations

• Bit test branch instructions

• Bit manipulation instructions, etc.

• Clock

• Selectable main clock source

Main OSC clock (up to 16.25 MHz, maximum machine clock frequency: 8.125 MHz)

External clock (up to 32.5 MHz, maximum machine clock frequency: 16.25 MHz)

Main CR clock (1/8/10/12.5 MHz

±2%,

maximum machine clock frequency: 12.5 MHz)

• Selectable subclock source

Sub-OSC clock (32.768 kHz)

External clock (32.768 kHz)

Sub-CR clock (Typ: 100 kHz, Min: 50 kHz, Max: 200 kHz)

• Timer

• 8/16-bit composite timer

2 channels

• 8/16-bit PPG

3 channels

• 16-bit PPG

1 channel (can work independently or together with the multi-pulse generator)

• 16-bit reload timer

1 channel (can work independently or together with the multi-pulse generator)

• Time-base timer

1 channel

• Watch prescaler

1 channel

• UART/SIO

1 channel

• Full duplex double buffer

• Capable of clock-asynchronous (UART) serial data transfer and clock-synchronous (SIO) serial data

transfer

(Continued)

For the information for microcontroller supports, see the following web site.

http://edevice.fujitsu.com/micom/en-support/

2010.4

MB95330H Series

(Continued)

• I

1 channel

• Built-in wake-up function

• Multi-pulse generator (MPG) (for DC motor control)

1 channel

• 16-bit reload timer

1 channel

• 16-bit PPG timer

1 channel

• Waveform sequencer (including a 16-bit timer equipped with a buffer and a compare clear function)

• LIN-UART

• Full duplex double buffer

• Capable of clock-synchronous serial data transfer and clock-asynchronous serial data transfer

• External interrupt

10 channels

• Interrupt by edge detection (rising edge, falling edge, and both edges can be selected)

• Can be used to wake up the device from different low power consumption (standby) modes

• 8/10-bit A/D converter

8 channels

• 8-bit and 10-bit resolution can be chosen.

• Low power consumption (standby) modes

• Stop mode

• Sleep mode

• Watch mode

• Time-base timer mode

• I/O port

• MB95F332H/F333H/F334H (maximum no. of I/O ports: 28)

General-purpose I/O ports (N-ch open drain)

General-purpose I/O ports (CMOS I/O)

: 25

• MB95F332K/F333K/F334K (maximum no. of I/O ports: 29)

General-purpose I/O ports (N-ch open drain)

General-purpose I/O ports (CMOS I/O)

: 25

• On-chip debug

• 1-wire serial control

• Serial writing supported (asynchronous mode)

• Hardware/software watchdog timer

• Built-in hardware watchdog timer

• Low-voltage detection reset circuit

• Built-in low-voltage detector

• Clock supervisor counter

• Built-in clock supervisor counter function

• Programmable port input voltage level

• CMOS input level / hysteresis input level

• Dual operation Flash memory

• The erase/write operation and the read operation can be executed in different banks (upper bank/lower

bank) simultaneously.

• Flash memory security function

• Protects the content of the Flash memory

DS07–12629–1E

MB95330H Series

■

PRODUCT LINE-UP

Part number

MB95F332H

Parameter

MB95F333H

MB95F334H

MB95F332K

MB95F333K

MB95F334K

Type

Flash memory product

Clock

supervisor

It supervises the main clock oscillation.

counter

Program ROM

8 Kbyte

12 Kbyte

20 Kbyte

8 Kbyte

12 Kbyte

20 Kbyte

capacity

RAM capacity

240 bytes

496 bytes

1008 bytes

240 bytes

496 bytes

1008 bytes

Low-voltage

Yes

detection reset

Reset input

Dedicated

Selected by software

Number of basic instructions

: 136

Instruction bit length

: 8 bits

Instruction length

: 1 to 3 bytes

CPU functions

Data bit length

: 1, 8 and 16 bits

Minimum instruction execution time : 61.5 ns (with machine clock = 16.25 MHz)

Interrupt processing time

: 0.6 µs (with machine clock = 16.25 MHz)

I/O ports (Max): 29

I/O ports (Max): 28

General-

CMOS I/O: 25

purpose I/O

N-ch open drain: 3

N-ch open drain: 4

Time-base

Interrupt cycle: 0.256 ms to 8.3 s (when external clock = 4 MHz)

timer

Hardware/

Reset generation cycle

software

Main oscillation clock at 10 MHz: 105 ms (Min)

watchdog timer The sub-CR clock can be used as the source clock of the hardware watchdog timer.

Wild register

It can be used to replace three bytes of data.

A wide range of communication speeds can be selected by a dedicated reload timer.

Clock-synchronous serial data transfer and clock-asynchronous serial data transfer is

LIN-UART

enabled.

The LIN function can be used as a LIN master or a LIN slave.

8 channels

8/10-bit A/D

converter

8-bit resolution and 10-bit resolution can be chosen.

2 channels

8/16-bit

The timer can be configured as an "8-bit timer x 2 channels" or a "16-bit timer x 1 channel".

composite

It has built-in timer function, PWC function, PWM function and input capture function.

timer

Count clock: it can be selected from internal clocks (seven types) and external clocks.

It can output square wave.

10 channels

External

Interrupt by edge detection (The rising edge, falling edge, or both edges can be selected.)

interrupt

It can be used to wake up the device from different standby modes.

1-wire serial control

On-chip debug

It supports serial writing. (asynchronous mode)

(Continued)

DS07–12629–1E

MB95330H Series

(Continued)

Part number

MB95F332H

Parameter

MB95F333H

MB95F334H

MB95F332K

MB95F333K

MB95F334K

UART/SIO

8/16-bit PPG

16-bit PPG

16-bit reload

timer

Multi-pulse

generator (for

DC motor

control)

Watch

prescaler

1 channel

Data transfer with UART/SIO is enabled.

It has a full duplex double buffer, variable data length (5/6/7/8 bits), a built-in baud rate

generator and an error detection function.

It uses the NRZ type transfer format.

LSB-first data transfer and MSB-first data transfer are available to use.

Clock-asynchronous (UART) serial data transfer and clock-synchronous (SIO) serial data

transfer is enabled.

1 channel

Master/slave transmission and receiving

It has a bus error function, an arbitration function, a transmission direction detection function

and a wake-up function.

It also has functions of generating and detecting repeated START conditions.

3 channels

Each channel of PPG can be used as two 8-bit PPG channels or a single 16-bit PPG channel.

The counter operating clock can be selected from eight clock sources.

PWM mode and one-shot mode are available to use.

The counter operating clock can be selected from eight clock sources.

It supports external trigger start.

It can work independently or together with the multi-pulse generator.

Two clock modes and two counter operating modes are available to use.

It can output square waveform.

Count clock: it can be selected from internal clocks (seven types) and external clocks.

Two counter operating modes: reload mode and one-shot mode

It can work independently or together with the multi-pulse generator.

16-bit PPG timer: 1 channel

16-bit reload timer operations: toggle output, one-shot output

Event counter: 1 channel

Waveform sequencer (including a 16-bit timer equipped with a buffer and a compare clear

function)

Eight different time intervals can be selected.

It supports automatic programming, Embedded Algorithm, and write/erase/erase-suspend/

erase-resume commands.

It has a flag indicating the completion of the operation of Embedded Algorithm.

Flash memory

Number of write/erase cycles: 100000

Data retention time: 20 years

Flash security feature for protecting the content of the Flash memory

Standby mode Sleep mode, stop mode, watch mode, time-base timer mode

FPT-32P-M30

Package

DIP-32P-M06

LCC-32P-M19

DS07–12629–1E

MB95330H Series

■

PACKAGES AND CORRESPONDING PRODUCTS

Part number

MB95F332H

Package

FPT-32P-M30

DIP-32P-M06

LCC-32P-M19

MB95F332K

MB95F333H

MB95F333K

MB95F334H

MB95F334K

O: Available

DS07–12629–1E

参数对比

与MB95F333HPMC-G-SNE2相近的元器件有：MB95F332HP-G-SH-SNE2、MB95F333KP-G-SH-SNE2、MB95F333KWQN-G-SNE1、MB95F332KPMC-G-SNE2、MB95F333HP-G-SH-SNE2、MB95F334KWQN-G-SNE1、MB95F334HP-G-SH-SNE2、MB95F332KP-G-SH-SNE2、MB95F334KP-G-SH-SNE2。描述及对比如下：

型号	MB95F333HPMC-G-SNE2	MB95F332HP-G-SH-SNE2	MB95F333KP-G-SH-SNE2	MB95F333KWQN-G-SNE1	MB95F332KPMC-G-SNE2	MB95F333HP-G-SH-SNE2	MB95F334KWQN-G-SNE1	MB95F334HP-G-SH-SNE2	MB95F332KP-G-SH-SNE2	MB95F334KP-G-SH-SNE2
描述	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PQFP32, 7 X 7 MM, 1.60 MM HEIGHT, 0.80 MM PITCH, PLASTIC, LQFP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PDIP32, 1.778 MM PITCH, PLASTIC, DIP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PDIP32, 1.778 MM PITCH, PLASTIC, DIP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PQCC32, 5 X 5 MM, 0.80 MM HEIGHT, 0.50 MM PITCH, PLASTIC, QFN-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PQFP32, 7 X 7 MM, 1.60 MM HEIGHT, 0.80 MM PITCH, PLASTIC, LQFP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PDIP32, 1.778 MM PITCH, PLASTIC, DIP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PQCC32, 5 X 5 MM, 0.80 MM HEIGHT, 0.50 MM PITCH, PLASTIC, QFN-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PDIP32, 1.778 MM PITCH, PLASTIC, DIP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PDIP32, 1.778 MM PITCH, PLASTIC, DIP-32	Microcontroller, 8-Bit, FLASH, F2MC-8 CPU, 16.25MHz, CMOS, PDIP32, 1.778 MM PITCH, PLASTIC, DIP-32
包装说明	7 X 7 MM, 1.60 MM HEIGHT, 0.80 MM PITCH, PLASTIC, LQFP-32	SDIP, SDIP32,.4	SDIP, SDIP32,.4	HVQCCN, LCC32,.2SQ,20	LQFP, QFP32,.35SQ,32	SDIP, SDIP32,.4	HVQCCN, LCC32,.2SQ,20	1.778 MM PITCH, PLASTIC, DIP-32	1.778 MM PITCH, PLASTIC, DIP-32	1.778 MM PITCH, PLASTIC, DIP-32
Reach Compliance Code	compli	compliant	compliant	compliant	compliant	compliant	compliant	compliant	compliant	compliant
ECCN代码	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2	3A991.A.2
具有ADC	YES	YES	YES	YES	YES	YES	YES	YES	YES	YES
位大小	8	8	8	8	8	8	8	8	8	8
CPU系列	F2MC-8	F2MC-8	F2MC-8	F2MC-8	F2MC-8	F2MC-8	F2MC-8	F2MC-8	F2MC-8	F2MC-8
最大时钟频率	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz	32.5 MHz
DAC 通道	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO
DMA 通道	NO	NO	NO	NO	NO	NO	NO	NO	NO	NO
JESD-30 代码	S-PQFP-G32	R-PDIP-T32	R-PDIP-T32	S-PQCC-N32	S-PQFP-G32	R-PDIP-T32	S-PQCC-N32	R-PDIP-T32	R-PDIP-T32	R-PDIP-T32
长度	7 mm	28 mm	28 mm	5 mm	7 mm	28 mm	5 mm	28 mm	28 mm	28 mm
I/O 线路数量	28	28	29	29	29	28	29	28	29	29
端子数量	32	32	32	32	32	32	32	32	32	32
最高工作温度	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C
最低工作温度	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C
PWM 通道	YES	YES	YES	YES	YES	YES	YES	YES	YES	YES
封装主体材料	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY
封装代码	LQFP	SDIP	SDIP	HVQCCN	LQFP	SDIP	HVQCCN	SDIP	SDIP	SDIP
封装等效代码	QFP32,.35SQ,32	SDIP32,.4	SDIP32,.4	LCC32,.2SQ,20	QFP32,.35SQ,32	SDIP32,.4	LCC32,.2SQ,20	SDIP32,.4	SDIP32,.4	SDIP32,.4
封装形状	SQUARE	RECTANGULAR	RECTANGULAR	SQUARE	SQUARE	RECTANGULAR	SQUARE	RECTANGULAR	RECTANGULAR	RECTANGULAR
封装形式	FLATPACK	IN-LINE	IN-LINE	CHIP CARRIER	FLATPACK	IN-LINE	CHIP CARRIER	IN-LINE	IN-LINE	IN-LINE
电源	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V	2.5/5 V
认证状态	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified
RAM（字节）	496	240	496	496	240	496	1008	1008	240	1008
ROM（单词）	12288	8192	12288	12288	8192	12288	20480	20480	8192	20480
ROM可编程性	FLASH	FLASH	FLASH	FLASH	FLASH	FLASH	FLASH	FLASH	FLASH	FLASH
座面最大高度	1.6 mm	5.4 mm	5.4 mm	0.8 mm	1.6 mm	5.4 mm	0.8 mm	5.4 mm	5.4 mm	5.4 mm
速度	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz	16.25 MHz
最大压摆率	26.5 mA	26.5 mA	26.5 mA	26.5 mA	26.5 mA	26.5 mA	26.5 mA	26.5 mA	26.5 mA	26.5 mA
最大供电电压	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V
最小供电电压	2.4 V	2.4 V	2.4 V	2.4 V	2.4 V	2.4 V	2.4 V	2.4 V	2.4 V	2.4 V
标称供电电压	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V
表面贴装	YES	NO	NO	YES	YES	NO	YES	NO	NO	NO
技术	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS
温度等级	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL
端子形式	GULL WING	THROUGH-HOLE	THROUGH-HOLE	NO LEAD	GULL WING	THROUGH-HOLE	NO LEAD	THROUGH-HOLE	THROUGH-HOLE	THROUGH-HOLE
端子节距	0.8 mm	1.778 mm	1.778 mm	0.5 mm	0.8 mm	1.778 mm	0.5 mm	1.778 mm	1.778 mm	1.778 mm
端子位置	QUAD	DUAL	DUAL	QUAD	QUAD	DUAL	QUAD	DUAL	DUAL	DUAL
宽度	7 mm	10.16 mm	10.16 mm	5 mm	7 mm	10.16 mm	5 mm	10.16 mm	10.16 mm	10.16 mm
uPs/uCs/外围集成电路类型	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER	MICROCONTROLLER
厂商名称	FUJITSU(富士通)	-	-	-	-	FUJITSU(富士通)	FUJITSU(富士通)	FUJITSU(富士通)	FUJITSU(富士通)	FUJITSU(富士通)