文档预览

FEUL610Q409-01

ML610Q407/ML610Q408/ML610Q409

User’s Manual

Issue Date: Nov. 7, 2010

NOTICE

The information contained herein can change without notice owing to product and/or technical improvements. Before using the

product, please make sure that the information being referred to is up-to-date.

The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard

action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected

in the actual circuit, assembly, and program designs.

When designing your product, please use our product below the specified maximum ratings and within the specified operating

ranges including, but not limited to, operating voltage, power dissipation, and operating temperature.

OKI SEMICONDUCTOR assumes no responsibility or liability whatsoever for any failure or unusual or unexpected

operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or

unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum

ratings or operation outside the specified operating range.

Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is granted by us in

connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us

for any infringement of a third party’s right which may result from the use thereof.

The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g.,

office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not,

unless specifically authorized by OKI SEMICONDUCTOR authorized for use in any system or application that requires special

or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or

application may result in the loss or damage of property, or death or injury to humans.

Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear

power control, medical equipment, and life-support systems.

Certain products in this document may need government approval before they can be exported to particular countries. The

purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and

necessary steps at their own expense for these.

No part of the contents contained herein may be reprinted or reproduced without our prior permission.

Preface

This manual describes the operation of the hardware of the 8-bit microcontroller

ML610Q407/ML610Q408/ML610Q409.

The following manuals are also available.

nX-U8/100 Core Instruction Manual

Read them as necessary.

Description on the basic architecture and the each instruction of the

nX-U8/100 Core

MACU8 Assembler Package User’s Manual

Description on the method of operating the relocatable assembler, the linker, the

librarian, and the object converter and also on the specifications of the assembler

language.

CCU8 User’s Manual

Description on the method of operating the

compiler

CCU8 Programming Guide

Description on the method of programming.

CCU8 Language Reference

Description on the

language specifications

DTU8 Debugger User’s Manual

Description on the method of operating the debugger

DTU8

IDEU8 User’s Manual

Description on the integrated development environment

IDEU8

uEASE User’s Manual

Description on the on-chip debug tool uEASE.

uEASE connection Manual for ML610Q407/ML610Q408/ML610Q409

Description about the connection between uEASE and

ML610Q407/

ML610Q408/ ML610Q409

FWuEASE Flash Writer Host Program User’s Manual

Description on the Flash Writer host program.

Notation

Classification

♦

Numeric value

♦

Unit

Notation

xxh, xxH

xxb

word, W

byte, B

nibble, N

maga-, M

kilo-, K

kilo-, k

milli-, m

micro-, µ

nano-, n

second, s (lower case)

“H” level, “1” level

“L” level, “0” level

Description

Indicates a hexadecimal number. x: Any value in the range of 0 to F

Indicates a binary number; “b” may be omitted. x: A value 0 or 1

1 word = 16 bits

1 byte = 8 bits

1 nibble = 4 bits

= 1024

= 1000

-3

-6

-9

second

Indicates high voltage signal levels V

and V

as specified by the

electrical characteristics.

Indicates low voltage signal levels V

and V

as specified by the

electrical characteristics.

♦

Terminology

♦

R/W: Indicates that Read/Write attribute. “R” indicates that data can be read and “W” indicates that data can be written.

“R/W” indicates that data can be read or written.

Invalid bit: This bit reads “0” when read. Write to this bit is ignored.

Bit name

MSB

FCON0

R/W

Initial value

⎯

R/W

⎯

R/W

OUTC1

R/W

OUTC0

R/W

OSCM1

R/W

OSCM0

R/W

SYSC1

R/W

SYSC0

R/W

LSB

Initial value after reset

ML610Q407/ML610Q408/ML610Q409 User’s Manual

Contents

Table of Contents

Chapter 1

1. Overview ........................................................................................................................................................................... 1-1

1.1 Features ........................................................................................................................................................................ 1-1

1.2 Configuration of Functional Blocks ............................................................................................................................. 1-4

1.2.1

Block Diagram of ML610Q407/ML610Q408/ML610Q409.............................................................................. 1-4

1.3 Pins .............................................................................................................................................................................. 1-5

1.3.1 Pin Layout............................................................................................................................................................. 1-5

1.3.1.1

1.3.1.2

1.3.1.3

1.3.1.4

1.3.1.5

1.3.1.6

1.3.1.7

Pin Layout of ML610Q407 TQFP Package ......................................................................................................................... 1-5

Pin Layout of ML610Q408 TQFP Package ......................................................................................................................... 1-6

Pin Layout of ML610Q409 TQFP Package ......................................................................................................................... 1-7

Pin Layout of ML610Q407 Chip.......................................................................................................................................... 1-8

Pin Layout of ML610Q408 Chip.......................................................................................................................................... 1-9

Pin Layout of ML610Q409 Chip........................................................................................................................................ 1-10

Pad Coordinates of ML610Q407/ML610Q408/M610Q409 Chip ...................................................................................... 1-11

1.3.2 List of Pins.......................................................................................................................................................... 1-12

1.3.3 Pin Descriptions.................................................................................................................................................. 1-15

1.3.4 Handling of Unused Pins .................................................................................................................................... 1-19

Chapter 2

2. CPU and Memory Space ...................................................................................................................................................... 2-1

2.1 Overview ...................................................................................................................................................................... 2-1

2.2 Program Memory Space ............................................................................................................................................... 2-1

2.3 Data Memory Space ..................................................................................................................................................... 2-2

2.4 Instruction Length......................................................................................................................................................... 2-3

2.5 Data Type ..................................................................................................................................................................... 2-3

2.6 Description of Registers ............................................................................................................................................... 2-4

2.6.1 List of Registers .................................................................................................................................................... 2-4

2.6.2 Data Segment Register (DSR) .............................................................................................................................. 2-5

Chapter 3

3. Reset Function ...................................................................................................................................................................... 3-1

3.1 Overview ...................................................................................................................................................................... 3-1

3.1.1 Features................................................................................................................................................................. 3-1

3.1.2 Configuration........................................................................................................................................................ 3-1

3.1.3 List of Pins............................................................................................................................................................ 3-1

3.2 Description of Registers ............................................................................................................................................... 3-2

3.2.1 List of Registers .................................................................................................................................................... 3-2

3.2.2 Reset Status Register (RSTAT) ............................................................................................................................. 3-2

3.3 Description of Operation .............................................................................................................................................. 3-3

3.3.1 Operation of System Reset Mode ......................................................................................................................... 3-3

Contents – 0

参数对比

与ML610Q408-NNNWA相近的元器件有：ML610Q408P-NNNTBZ03A、ML610Q409P-NNNWA、ML610Q407P-NNNTBZ03A、ML610Q409P-NNNTBZ03A、ML610Q407-NNNTBZ03A。描述及对比如下：

型号	ML610Q408-NNNWA	ML610Q408P-NNNTBZ03A	ML610Q409P-NNNWA	ML610Q407P-NNNTBZ03A	ML610Q409P-NNNTBZ03A	ML610Q407-NNNTBZ03A
描述	RISC Microcontroller, CMOS, 2.27 X 2.23 MM, 0.35MM HEIGHT, 0.80 MM PITCH,DIE-88	RISC Microcontroller, 8-Bit, FLASH, 2.5MHz, CMOS, PQFP100, 14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100	RISC Microcontroller, CMOS, 2.27 X 2.23 MM, 0.35MM HEIGHT, 0.80 MM PITCH,DIE-88	RISC Microcontroller, 8-Bit, FLASH, 2.5MHz, CMOS, PQFP100, 14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100	RISC Microcontroller, 8-Bit, FLASH, 2.5MHz, CMOS, PQFP100, 14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100	RISC Microcontroller, 8-Bit, FLASH, 2.5MHz, CMOS, PQFP100, 14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100
零件包装代码	DIE	QFP	DIE	QFP	QFP	QFP
包装说明	,	14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100	DIE,	14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100	14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100	14 X 14MM, 0.50 PITCH, PLASTIC, TQFP-100
针数	88	100	88	100	100	100
Reach Compliance Code	unknown	unknown	unknown	unknown	unknown	unknown
认证状态	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified	Not Qualified
uPs/uCs/外围集成电路类型	MICROCONTROLLER, RISC	MICROCONTROLLER, RISC	MICROCONTROLLER, RISC	MICROCONTROLLER, RISC	MICROCONTROLLER, RISC	MICROCONTROLLER, RISC
厂商名称	LAPIS Semiconductor Co Ltd	-	LAPIS Semiconductor Co Ltd	LAPIS Semiconductor Co Ltd	LAPIS Semiconductor Co Ltd	LAPIS Semiconductor Co Ltd
位大小	-	8	8	8	8	8
JESD-30 代码	-	S-PQFP-G100	-	S-PQFP-G100	S-PQFP-G100	S-PQFP-G100
JESD-609代码	-	e6	-	e6	e6	e6
端子数量	-	100	88	100	100	100
最高工作温度	-	85 °C	-	85 °C	85 °C	70 °C
最低工作温度	-	-40 °C	-	-40 °C	-40 °C	-20 °C
封装主体材料	-	PLASTIC/EPOXY	-	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY
封装代码	-	QFP	DIE	QFP	QFP	QFP
封装等效代码	-	TQFP100,.63SQ	-	TQFP100,.63SQ	TQFP100,.63SQ	TQFP100,.63SQ
封装形状	-	SQUARE	RECTANGULAR	SQUARE	SQUARE	SQUARE
封装形式	-	FLATPACK	UNCASED CHIP	FLATPACK	FLATPACK	FLATPACK
电源	-	1.5/3.3 V	-	1.5/3.3 V	1.5/3.3 V	1.5/3.3 V
RAM（字节）	-	1024	-	1024	1024	1024
ROM（单词）	-	8192	-	8192	8192	8192
ROM可编程性	-	FLASH	-	FLASH	FLASH	FLASH
速度	-	2.5 MHz	2.5 MHz	2.5 MHz	2.5 MHz	2.5 MHz
表面贴装	-	YES	YES	YES	YES	YES
技术	-	CMOS	-	CMOS	CMOS	CMOS
温度等级	-	INDUSTRIAL	-	INDUSTRIAL	INDUSTRIAL	COMMERCIAL
端子面层	-	TIN BISMUTH	-	TIN BISMUTH	TIN BISMUTH	TIN BISMUTH
端子形式	-	GULL WING	NO LEAD	GULL WING	GULL WING	GULL WING
端子节距	-	0.5 mm	-	0.5 mm	0.5 mm	0.5 mm
端子位置	-	QUAD	UPPER	QUAD	QUAD	QUAD
具有ADC	-	-	YES	YES	YES	YES
DAC 通道	-	-	NO	NO	NO	NO
DMA 通道	-	-	NO	NO	NO	NO
长度	-	-	2.27 mm	14 mm	14 mm	14 mm
I/O 线路数量	-	-	39	35	27	35
PWM 通道	-	-	YES	YES	YES	YES
最大供电电压	-	-	3.6 V	3.6 V	3.6 V	3.6 V
最小供电电压	-	-	1.8 V	1.8 V	1.8 V	1.8 V
标称供电电压	-	-	3 V	3 V	3 V	3 V
宽度	-	-	2.23 mm	14 mm	14 mm	14 mm

1.5V微型无线调频话筒: 本文用了 12 个元件做了一个微型无线调频话筒，工作频率稳定，发射距离在 30 米左右， 6V 供...; fighting 无线连接

东方红三号通信卫星转发器: 八十年代，世界各国包括中国等国家和地区建立起国内卫星通信系统。中国在1989年对国内卫星通信进...; JasonYoo 无线连接

基于Z7010的EBAZ4205矿板的原理图和PCB: 本帖最后由 chenzhufly 于 2019-6-4 13:06 编辑附件是...; chenzhufly FPGA/CPLD

【匠芯创D133CBS】--2.Rt-thread系统下使用CJSON组包解包数据: # 简介 cJSON是一个用C语言的轻量级JSON编解码器，它允许开发者在C程序中轻松地创建、解析和...; andeyqi 国产芯片交流

艾迈斯欧司朗邀您填写问卷，兑换红地球tritan夏日吸管杯！: 艾迈斯欧司朗携传感、光源和可视化领域最新产品及技术组合， ...; eric_wang 综合技术交流

ST NUCLEO-H533RE使用TIM1通道1和通道2输出互补PWM: 本帖最后由 crz_21 于 2024-8-16 10:16 编辑一、创建工程流程 ...; crz_21 stm32/stm8

简单手势唤醒便携设备的设计思路及其代码

本文讨论如何唤醒平板电脑等触控装置，无需接触设备，而是采用基本的手势识别及新颖的接近检测传感器。本文讨论了相关设计的物理布局、速度限制、检测门限、系统集成，以及人为因素的影响；给出了软件实时的例程。厨房里的突发奇想如果做饭时使用触控设备，您可能会注意到按照设备列出的食谱烹饪并非想象得那么简单。技术达人(例如鄙人)走进厨房时，喜欢看着平板电脑或智能手机上的菜谱做饭。您可能会说：“好吧，...[详细]
遥控门禁(RKE)的设计要求

遥控门禁(RKE)系统已经备受用户的青睐，北美80%以上、欧洲70%以上的新车均安装了RKE系统。除了显而易见的便捷性，RKE用于开启汽车制动装置的技术还具有防盗作用。欧洲汽车生产厂商与保险公司合作，要求购置汽车保险时汽车要安装RKE系统。德国已开始推行这一政策，预计在几年内会扩展到整个欧洲。大多数RKE系统采用单向(单工)通信，但第二代、第三代RKE系统将提供返回到钥匙的逆向通信双工操作...[详细]
百余家传统手机商线上复苏避开价格战需跳出山寨模式

国产手机正迎来重新崛起的春天。易观国际近日发布的《2012年第一季度中国移动终端市场季度监测》显示，三星、诺基亚、华为分列中国手机市场销售量前三位，而诺基亚的市场份额同比下降了18.5%，市场份额被上升较快的几大国产品牌分食。　　据不完全统计，截至今年6月底，已经有包括TCL、步步高、金立、OPPO等100多家传统手机厂商启动了多种形式的网上销售，这意味沉寂了多年的传统手机厂商开始高调...[详细]
IHS拆机显示谷歌Nexus 7平板部件成本152美元

谷歌Nexus 7平板　　北京时间7月12日凌晨消息，据市场研究公司IHS iSuppli的拆机分析显示，谷歌Nexus 7平板电脑的部件成本为152美元。　　谷歌推出Nexus 7平板电脑旨在与苹果iPad展开竞争，但IHS iSuppli分析师拆机后发现，这种平板电脑内部看起来与亚马逊Kindle Fire十分相似。根据这家市场研究公司的初步判定，低端8GB版Nexus 7的部件成...[详细]
HTC手机赴美卡关智能手机的专利战争

台湾之光在美国发光发热，不只职棒球员，销售自有品牌hTC的智能型手机大厂宏达电也闯出一片天。然而，如同棒球比赛是高度对抗性的战争，智能型手机的市场竞争也是剑拔弩张、战况激烈。除了拼功能、拼营销之外，还将战线延长到法院与行政机关，作战兵团里结合了法律、技术及商业人才，专利则是武力最强的炮弹。战火烟硝弥漫之际，原本光芒万丈的荣景难免也陷于法律的阴影之下。 hTC手机赴美卡关事件宏达电是一家...[详细]
高能效LED道路照明驱动器设计

　　随着LED在性能及成本几乎各个方面的持续改进，LED照明正在用于越来越宽的应用领域，其中LED街灯就是业界关注的一个焦点。安森美半导体身为应用于高能效电子产品的首要高性能硅方案供应商，针对各类LED照明应用提供丰富的驱动器、稳压器/稳流器，及通信、光传感器、MOSFET、整流器、保护、滤波器及热管理产品等完整方案。本文将介绍一款用于LED街灯等应用的28 V、3.3 A的离线高功率因数LED...[详细]
基于Linux的动态电源管理:使嵌入式设备更节能

　　为了在产品众多、竞争激烈的市场上使产品与众不同，手持设备的制造商们往往把电池寿命和电源管理作为手机、PDA、多媒体播放器、游戏机、其它便携式消费类设备等产品的关键卖点来考虑。用户是从电池寿命这方面来看待电源管理的成效，其实它是多种因素共同作用的结果，这些因素包括 CPU 功能、系统软件、中间件，以及使用户可以在更长的充电或更换电池的间隔时间内享用各自设备的策略。　　电源管理范围　　任...[详细]
Altera推出最新IP内核产品

2012年7月11号，北京——Altera公司(NASDAQ: ALTR)今天宣布，推出40-Gbps以太网(40GbE)和100-Gbps以太网(100GbE)知识产权(IP)内核产品。这些内核能够高效的构建需要大吞吐量标准以太网连接的系统，包括，芯片至光模块、芯片至芯片以及背板应用等。介质访问控制(MAC)和物理编码子层以及物理介质附加(PCS+PMA)子层IP内核符合IEEE 802.3b...[详细]
医疗云破解医疗资源分配不均难题

　　当医疗资源分配不均，患者劳累奔波在大医院就诊时，当检查结果不互认，患者费财费时间重新做检查时，当等待时间过长，而就诊时间较短时，医患之间的种种矛盾应声而起。“十二五”规划将民生问题提到了前沿，医改首当其冲，其中，用信息化手段解决“看病贵、看病难”的顽疾，将是一个重要任务。　　医疗卫生信息化发展到今天，数据的重要性逐渐得到了大家的共识。而如何让这些数据互联互通、共享、再次利用，并保证患者...[详细]
基于ARM嵌入式IPCamera的设计与实现

0 前言随着社会的发展，人们对安全防范工作日益重视，监控产品也从以前只在重要单位使用发展到各个领域都在应用。监控产品的技术也从模拟向数字和网络技术发展。网络监控产品使用较多的是硬盘录像机，但价格比较高。有些场合对监控的要求并不高，也不需要录像，但有时又要在远程了解一下当地的画面，这时就希望使用一种低价的，又能实现远程操作的监控产品。所以就计划设计IPCamera（网络照相机），它能够接受网络...[详细]
HTC全球业绩大幅滑坡手机被指“低配高价”

每经网深圳7月10日电（记者齐文婷）前狼后虎，HTC在全球市场遭遇业绩下滑。据宏达国际电子股份有限公司(以下简称HTC)上周五（7月6日）公布的未经审计的今年二季度财报，HTC净利润由去年同期175.2亿新台币下跌至74亿新台币（约合2.477亿美元)，相比去年同期下降了57.8%。有业内人士向《每日经济新闻》记者透露，由于苹果、诺基亚等巨头的专利围剿，HTC的未来难言乐观；而...[详细]
科健衰败8年后开始拍卖资产还债

7月11日消息，8年前开始全面爆发危机的昔日国产手机巨头科健发布公告称，已于近日拍卖了部分资产，而其主要资产是75套房产，在房地产价格暴涨数倍后，这些拍卖的房产总算能给债主们一些交代。　　此前的今年5月，深圳市中院正式批准公司的重整计划。这意味着公司进入了实际的重整阶段。　　根据公告，法院委托的相关拍卖行对科健所持有北京中科健超导有限责任公司、深圳中科健实业有限公司、深圳科健三星(微博...[详细]
平板显示成熟市场下的TFT液晶面板部材业务新战略

在TFT液晶面板开始取代CRT之后，年需求量按面积计算一直保持着20～50％以上的大幅增长。但2010年对CRT的取代基本完成，2011年以后以电视为代表的应用市场的增长开始放缓。与此同时，TFT液晶面板的需求也开始下降。2011年随着市场行情的不断恶化，增长率下降至一位数左右。因TFT液晶面板的需求今后与尚未替代的应用设备市场的增长联动的趋势明显，与上年相比的增长率即便往好估计最多也只...[详细]
海信展示超短距激光投影智能电视

7月5日，在青岛举行的中国国际消费电子展（SINOCES 2012）上，海信展示了曾在2012CES上发布的超短距离激光投影智能电视。据悉，未来上市价格约2000元。　　该款激光电视分辨率为1920×1080，对比度大于500：1，噪声为22dB，输出光通量为1500流明。采用Andriod操作系统，有2个HDMI接口及2个USB接口，支持TF存储卡扩存、Wi-Fi、下载/播放视频节目...[详细]
Intersil推出集成ADC驱动器的40V低噪声精密仪表放大器

美国加州、MILPITAS --- 2012 年 7 月 10 日— 全球高性能模拟混合信号半导体设计和制造领导厂商Intersil公司（纳斯达克全球交易代码：ISIL）今天宣布，推出一款新型40V低噪声仪表放大器，这是业内首款集成模/数转换器（ADC）电平转换器和驱动器的精密放大器。 ISL28617包含一个差分输出，可以很容易的连接到目前的高性能差分输入高精度ADC。它提供了卓越的增益精...[详细]