3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
•
•
•
•
•
•
•
•
MP2 Series
Three levels of early mate, late break (EMLB)
sequencing or selective loading options
Footprint compatible with standard Futurebus+
®
Solder tail with true-position wafer
Ideal for hot swapping applications
End-to-end stackable
Right angle male for daughter card
Mates with MP2-R for backplane applications and
MP2-SXXXG for coplanar applications
• RoHS Compliant. See the Regulatory Information
Appendix (RIA) in the “RoHS compliance” section
of www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modified: September 17, 2013
TS-1122-C
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 µ" [1.27 µm] Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating:
Signal: 1.5 A – All contacts simultaneously
Insulation Resistance:
10
3
MΩ
Withstanding Voltage:
1000 V
AC
Environmental
Temperature Rating:
-55°C to +125°C
Process Temperature Rating:
260°C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
MP2 Series
POSITION 1
POSITION 2
17.00
.669
"A"
2.00
.079
13.00
.512
TYP.
POSITION X
E D C B A
ROW
MATED WITH MP2-RXXX-5XXX-XXXX
17.80
.701
1.50
.059
2.00
.079
4X
MATING LENGTH
7.00
.276
16.80
.662
mm
[inch]
Tolerance Unless Noted
0
mm
±3
0.0
±0.3
0.00
±0.13
13.90
.547
3.75
.148
3.86
.152
4.00
.157
8.00
.315
[ ] Dimensions for Reference
Only
Notes:
1. Refer to IEC 61076-4-104 Futurebus+
®
global standard.
2. For special pin arrangements, contact 3M.
2.00
.079
4X
2.00
.079
"B"
TYP.
TAIL LENGTH
Ordering Information
MP2 - PXXX - 5XM1 - XXXXX
P = Right Angle Header
Inversed
Pin Count
(See Table 1)
Rows
5 = 5 Rows
Loading Pattern and Tail
Length (See Table 2)
Termination Style
M = Solder Tail
TS-1122-C
Sheet 2 of 4
Plating Options
(See Table 3)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
Table 1 - Connector & Row Lengths
Pin Count
030
060
090
120
150
180
210
240
270
300
420
Dim. “A” mm
[inch]
11.95 [0.471]
23.95 [0.943]
35.95 [1.415]
47.95 [1.889]
59.95 [2.36]
71.95 [2.833]
83.95 [3.305]
95.95 [3.778]
107.95 [4.251]
119.95 [4.722]
167.95 [6.612]
Dim “B” mm
[inch]
10.00 [0.394]
22.00 [0.866]
34.00 [1.339]
46.00 [1.811]
58.00 [2.283]
70.00 [2.756]
82.00 [3.228]
94.00 [3.701]
106.00 [4.173]
118.00 [4.646]
166.00 [6.535]
Rows
5
5
5
5
5
5
5
5
5
5
5
MP2 Series
Table 2 - Mate & Tail Lengths, mm vs. Loading Pattern
Loading
Pattern
Code
1
2
3
4
5
6
7
8
9
A
B
C
D
E
G
Description
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
Rows A, B, C and D Filled
Rows A, B, C and D Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
All Positions Filled
Rows A, B, C and D Filled
Mate
Length
Row A
5.00
4.25
3.50
4.25
5.00
5.00
4.25
4.25
5.00
3.75
3.75
5.75
4.25
5.00
5.00
Mate
Length
Row B
5.00
5.00
4.25
5.00
5.00
4.25
5.00
4.25
3.50
4.50
4.50
5.75
5.00
5.75
4.25
Mate
Length
Row C
5.00
5.00
4.25
4.25
5.00
4.25
4.25
4.25
3.50
5.25
3.75
5.75
5.75
5.75
4.25
Mate
Length
Row D
5.00
5.00
5.00
4.25
5.00
5.00
5.00
4.25
3.50
4.50
4.50
5.75
5.00
5.75
5.00
Mate
Length
Row E
5.00
5.00
5.00
4.25
NA
NA
4.25
4.25
4.25
3.75
3.75
5.75
4.25
5.00
NA
Tail
Length
Row A
3.30
4.05
4.80
4.05
3.30
3.30
4.05
4.05
3.30
4.55
4.55
2.55
4.05.
4.05
3.30
Tail
Length
Row B
3.30
3.30
4.05
3.30
3.30
4.05
3.30
4.05
4.80
3.80
3.80
2.55
3.30
4.05
4.05
Tail
Length
Row C
3.30
3.30
4.05
4.05
3.30
4.05
4.05
4.05
4.80
3.05
4.55
2.55
2.55
4.05
4.05
Tail
Length
Row D
3.30
3.30
3.30
4.05
3.30
3.30
3.30
4.05
4.80
3.80
3.80
2.55
3.30
4.05
3.30
Tail
Length
Row E
3.30
3.30
3.30
4.05
NA
NA
4.05
4.05
4.05
4.55
4.55
2.55
4.05
4.05
NA
Table 3 - Plating
Plating Suffix
KR
(RIA E1 & C1 apply)
Plating Composition
0.76 µm [30 µ”] Min. Au Contact Area
2.54 µm [100 µ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ”] Min. Ni all over
0.08 µm [3 µ”] Min. Au Contact Area
LR
(RIA E1 & C1 apply)
0.67 µm [27 µ”] Min. PdNi Contact Area
2.54 µm [100 µ”] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ”] Min. Ni all over
TS-1122-C
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
MetPak
™
2-FB Inverse Header
2 mm 5-Row, Right Angle, Solder Tail
8.00
.315
2.00
.079
2.00
.079
TYP.
4X
4.00
.157
1.00
.039
MP2 Series
A1
4.00
.157
12.00
.472
"B"
2.05
.081
+.05
-.00
+.002
-.000
Ø
TYP. UNPLATED THRU HOLE
Ø
.10
Ø
1.50
.059
+.10
-.00
+.004
-.000
TYP. UNPLATED THRU HOLE
Ø
"D" PLATED THRU HOLE
Ø
.10
3.00
.118
.10
RECOMMENDED PCB HOLE MOUNTING PATTERN
Table 4 - HOLE PLATING FINISHES
HOLE
Finished Dia.
MM [in]
0.700-0.800
[.0276-.0315]
Cu Thickness [mm
[in]
0.025-0.045
[0.001-0.002]
Immersion Matte
Sn Thickness
microns [µ”]
0.5 - 2.5
[20 - 100]
Electrolytic Au
Thickness
microns [µ"]
0.1 - 0.5
[4 - 20]
OSP ENTEK
Thickness
microns [µ”]
0.2 - 0.5
[8 - 20]
Drilled Hole
Dia. mm [in]
0.830-0.860 [.0330-
.0340] or 0.85 mm
[#66] TWIST DRILL
“D”
1.25 INITIAL
.049
OFFSET ALLOWABLE
1.00 INITIAL
.039
OFFSET ALLOWABLE
1.5°
1°
INCLINATION TOLERANCES
TS-1122-C
Sheet 4 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M is a trademark of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are
not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect
unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES
NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s
option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where prohibited by law, 3M will
not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
RIA-2217B-E
嵌入式系统
