MT9V013
High-Quality Images Without Increasing
Power Requirements
VGA 1/11-Inch CMOS Digital Image Sensor
Features
DigitalClarity
™
CMOS imaging technology
l
Low-power, low-cost, progressive scan CMOS
image sensor
l
648H x 488V array format
l
1/11-inch optical format
l
30 frames per second full resolution
l
Support for external LED or Xenon flash
l
Programmable gain and exposure control
l
On-chip phase lock loop (PLL)
l
Standby mode for reduced current consumption
l
Automatic black level calibration
l
On-chip, 10-bit analog-to-digital converter (ADC)
l
SMIA-65 compatible
l
Two-wire serial programming interface
l
Bridging capability to selected Micron SOC
sensors for dual-camera phones
l
CCP2 and MIPI serial interface
l
Advanced Camera System
The MT9V013 is a VGA CMOS digital image sensor
with an advanced camera system. This camera system
features both mobile-industry processor interface
(MIPI) and Compact Camera Port 2 (CCP2) serial data
interfaces.
Small Size, Great Performance
Along with its 2.2μm-x-2.2μm pixel size and 1/11-inch
optical format, the MT9V013 holds a lot of features
within its small form factor, like programmable gain
and exposure control. Other programmable controls
include horizontal and vertical blanking, horizontal
and vertical image flip, windowing, sampling rates,
and general purpose inputs (GPI).
Applications
l
Tiny Device with Many Design Possibilities
Micron’s compact MT9V013 measures just 1.78mm
diagonally, preserving valuable real estate design after
design. The MT9V013 promises smaller form factors
for cell phones, PDAs, and other mobile products.
Cellular phones
l
PC cameras
l
PDAs
The MT9V013 provides the technical advantages
CMOS technology enjoys over CCDs, including a
smaller form factor, lower power consumption,
lower cost, and ease of design. To order parts, or for
more information, call us at 208-368-3900 or visit us
on the Web at www.micron.com/imaging.
Extraordinary Image Quality
The MT9V013 is a VGA, low-power CMOS image
sensor that features Micron’s DigitalClarity technol-
ogy, which reduces noise levels and enables the sen-
sor to capture superb-quality color images without
increasing power requirements.
MT9V013
Specifications
l
l
Pixel Size:
Array Format
(active):
Imaging Area:
Optical Format:
Color Filter
Array:
Frame Rate:
Scan Mode:
Shutter Mode:
2.2μm x 2.2μm
648H x 488V
1.43mm x 1.07mm
1/11-inch (4:3)
RGB Bayer color filters
30 fps (full resolution)
Progressive
Electronic rolling shutter (ERS)
Gain, frame rate, ADC reference,
horizontal/vertical blanking,
horizontal/vertical image flip
and reversal
Programmable to any size
l
l
ADC:
10-bit, on-chip
Output Interface:
Single-lane MIPI or
CCP2 interface (profile 0)
l
l
l
l
l
Data Rate:
140 Mb/s
Analog: 2.5V–3.1V
Digital: 1.7V–1.9V
I/O: 1.7V–1.9V
Supply
Voltage:
l
l
l
l
l
l
Operating Temp:
-30°C to +70°C (at junction)
4mm x 4mm x 3mm
25.48” (Max at 90% image
height)
Die
Targeted
Module Size:
l
Programmable
Controls:
l
CRA:
l
Package:
Windowing:
Block Diagram
Active-Pixel
Sensor (APS) Array
Timing Control
Sync Signals
Timing
and Control
Analog
Processing
ADC
Limiter
Data Out
Analog Processing
Control Register
Two-wire Serial Interface
www.micron.com
Products are warranted only to meet Micron’s production data
sheet specifications. Products and specifications are subject to
change without notice.
Micron, the Micron logo, and DigitalClarity are trademarks of Micron Technology, Inc. All
other trademarks are the property of their respective owners. ©2007 Micron Technology,
Inc. All rights reserved. 01/29/07 EN.L
DigiKey得捷技术专区
