UNISONIC TECHNOLOGIES CO., LTD
S2M
Preliminary
DIODE
SURFACE MOUNT GENERAL
RECTIFIER
DESCRIPTION
+
-
SMB
(JEDEC DO-214AA)
The UTC
S2M
is a surface mount general rectifier, it uses UTC’s
advanced technology to provide customers with high forward surge
current and low reverse leakage, etc.
The UTC
S2M
is suitable for surface mounted applications.
FEATURES
* Low reverse leakage
* High forward surge current capability
SYMBOL
ORDERING INFORMATION
Ordering Number
Package
SMB
Pin Assignment
1
2
K
A
Packing
Tape Reel
Lead Free
Halogen Free
S2ML-SMB-R
S2MG-SMB-R
Note: Pin Assignment: A: Anode K: Cathode
MARKING INFORMATION
PACKAGE
SMB
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 3
QW-R601-222.a
S2M
ABSOLUTE MAXIMUM RATINGS
Preliminary
DIODE
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
Repetitive Peak Reverse Voltage
V
RRM
1000
V
RMS Voltage
V
RMS
700
V
DC Blocking Voltage
V
DC
1000
V
Average Forward Rectified Current at T
L
=110°C
I
(AV)
2.0
A
Peak Forward Surge Current 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
I
FSM
60.0
A
(JEDEC Method)
Junction Temperature
T
J
-65~+175
°C
Storage Temperature
T
STG
-65~+175
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
SYMBOL
θ
JA
RATINGS
50
UNIT
°C/W
PARAMETER
Junction to Ambient (Note 2)
ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
Instantaneous Forward Voltage
V
F
I
F
=2.0A
1.1
V
5.0
μA
T
A
=25°C
DC Reverse Current at Rated DC Blocking
I
R
Voltage
T
A
=100°C
50.0
μA
Junction Capacitance (Note 1)
C
J
30.0
pF
Notes: 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R601-222.a
S2M
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R601-222.a
嵌入式系统
