型号
  • 型号
  • 关键词
首页 > 器件类别 > 无源元件

VLS2012ET-R47N-CA

Fixed Inductors 470nH 59mohms 2.25A PWR Wound Automotive

器件类别：无源元件   

厂商名称：TDK(株式会社)

厂商官网：http://www.tdk.com

下载文档
参数 预览 参数对比
VLS2012ET-R47N-CA 在线购买

供应商：

器件：VLS2012ET-R47N-CA

价格：-

最低购买：-

库存：点击查看

点击购买

器件参数
参数名称
属性值
Product Attribute
Attribute Value
制造商
Manufacturer
TDK(株式会社)
产品种类
Product Category
Fixed Inductors
RoHS
Details
电感
Inductance
470 nH
容差
Tolerance
30 %
最大直流电流
Maximum DC Current
2.05 A
最大直流电阻
Maximum DC Resistance
59 mOhms
最小工作温度
Minimum Operating Temperature
- 40 C
最大工作温度
Maximum Operating Temperature
+ 105 C
测试频率
Test Frequency
1 MHz
产品
Product
Power Inductors
屏蔽
Shielding
Shielded
端接类型
Termination Style
SMD/SMT
封装 / 箱体
Package / Case
2012-2
长度
Length
2 mm
宽度
Width
2 mm
高度
Height
1 mm
系列
Packaging
Cut Tape
系列
Packaging
MouseReel
系列
Packaging
Reel
类型
Type
AEC-Q200
芯体材料
Core Material
Ferrite
NumOfPackaging
3
工厂包装数量
Factory Pack Quantity
2000
文档预览
I
N
D
U
C
T
O
R
S
April 2016
Inductors for Power Circuits
Wound Ferrite
VLS-E-CA Series (For automobiles)
VLS2012E-CA
Type
VLS2012E-CA
(2/9)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20160411 / inductor_automotive_power_vls2012e-ca_en.fm
(3/9)
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive
Halogen-free
Inductors for Power Circuits
Wound Ferrite
Overview of VLS2012E-CA Type
FEATURES
Magnetic shield type wound inductor for power circuits.
Low-profile product.
High magnetic shield construction and compatible with high-density mounting.
APPLICATION
Car navigation, car stereo and car accessories only
Not available for use related to driving, curving, stopping, and the other safety.
PART NUMBER CONSTRUCTION
VLS
Series name
2012
L×W×H Dimensions
(mm)
2012
2.0×2.0×1.2
E
internal code
T
T
Packaging style
Taping
-
R47
Inductance
(μH)
R47
0.47
2R2
2.2
100
10
N
Inductance
tolerance
M
±20%
N
±30%
-
CA
Internal code
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Type
Package quantity
Individual weight
Operating
Storage
temperature
temperature
(pieces/reel)
（°C）
（°C）
VLS2012E-CA
–40 to +105
–40 to +105
2000
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
（mg）
17
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160411 / inductor_automotive_power_vls2012e-ca_en.fm
(4/9)
I
N
D
U
C
T
O
R
S
VLS2012E-CA Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Peak
Natural
cooling
T4
T:
Temperature
T3
T3
T2
T1
t1
t3
t2
t:
Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30s
Peak
Temp.
T4
260°C
Time
t3
10s
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160411 / inductor_automotive_power_vls2012e-ca_en.fm
(5/9)
I
N
D
U
C
T
O
R
S
VLS2012E-CA Type
SHAPE & DIMENSIONS
2.0±0.1
2.0±0.1
(0.65)
(0.7)
(0.65)
1.2max.
Dimensions in mm
RECOMMENDED LAND PATTERN
0.65
0.7
0.65
2.0
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20160411 / inductor_automotive_power_vls2012e-ca_en.fm
查看更多>
参数对比
与VLS2012ET-R47N-CA相近的元器件有：VLS2012ET-1R5N-CA、VLS2012ET-R68N-CA、VLS2010ET-100M-CA、VLS2012ET-1R0N-CA、VLS2012ET-2R2M-CA、VLS2012ET-150M-CA、VLS2012ET-6R8M-CA、VLS2012ET-3R3M-CA、VLS2012ET-100M-CA。描述及对比如下：
型号 VLS2012ET-R47N-CA VLS2012ET-1R5N-CA VLS2012ET-R68N-CA VLS2010ET-100M-CA VLS2012ET-1R0N-CA VLS2012ET-2R2M-CA VLS2012ET-150M-CA VLS2012ET-6R8M-CA VLS2012ET-3R3M-CA VLS2012ET-100M-CA
描述 Fixed Inductors 470nH 59mohms 2.25A PWR Wound Automotive Fixed Inductors 1.5uH 108mohms 1.45A PWR Wound Automotive Fixed Inductors 680nH 66mohms 1.9A PWR Wound Automotive Fixed Inductors 10uH 936mohms 520mA PWR Wound Automotive Fixed Inductors 1.0uH 86mohms 1.65A PWR Wound Automotive Fixed Inductors 2.2uH 153mohms 1.25A PWR Wound Automotive Fixed Inductors 15uH 1.062ohms 470mA PWR Wound Automotive Fixed Inductors 6.8uH 498mohms 690A PWR Wound Automotive Fixed Inductors 3.3uH 228mohms 1.0A PWR Wound Automotive Fixed Inductors 10uH 834mohms 530mA PWR Wound Automotive
是否Rohs认证 - 符合 - - 符合 符合 符合 符合 符合 符合
厂商名称 - TDK(株式会社) - - TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社)
Reach Compliance Code - compliant - - compliant compliant compliant compliant compliant compliant
ECCN代码 - EAR99 - - EAR99 EAR99 EAR99 EAR99 EAR99 EAR99
Factory Lead Time - 12 weeks - - 12 weeks 12 weeks 12 weeks 12 weeks 12 weeks 12 weeks
电感器类型 - GENERAL PURPOSE INDUCTOR - - GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR GENERAL PURPOSE INDUCTOR
2006年十大热门专业纵览
2006年十大热门专业纵览 1.电子信息类 　　电子信息产业是一项新兴的高科技产业，被...
fighting 模拟电子
关于wince上显示的问题，急！！！
我在VS2005中建了一个c++的移动设备的MFC，是一个264 的解码器，现在要加一个显示的程序，...
gutouabc123 WindowsCE
TI28335的参考资料集锦
28335片内FLASH插件安装方法 http://www.hellodsp.com/bbs/vie...
大意了 微控制器 MCU
高考使用手机信号屏蔽器 防止信号“乱入”
五月已接近尾声，炽热的六月将到来，现在也是高考冲刺的最后时刻，全国各大高中学生都在紧张的复习。信息时...
azhiking RF/无线
预测：网上播客将日趋流行
美国一项最新调查显示，12%的网络使用者曾下载并收听播客文件。据调查，12%的网络使用者表示，自己曾...
mdreamj RF/无线
日本欧姆社电子类图书系列（2.16 新增数字图像处理系列丛书）
2月10日，增加“机器人竞技系列”（共7本书），详见6楼。 2.15 新增OHM实用手...
tiankai001 下载中心专版
热门器件
热门资源推荐
DC-DC变换电路 面板数据模型的matlab程序（以香烟为例） 射频模块设计 C代码一些比较基本的函数和类 Patch Antenna design tips [程序设计实践].(美)柯奈汉.文字版 矿石收音机原理_冯报本 第12章 驱动开发之字符设备驱动程序编译测试 《环境空气气态污染物（SO2、NO2、O3、CO）连续自动监测系统安装和验收技术规范》（HJ 193－2013） 电路原理上下册（汪建）
为什么I2C总线的BUSY位会为一直为忙碌？ 请教一个单片机内存管理的问题！ 【Follow me第二季第2期】进阶任务 linux源码中的细节--请教linux大神 用TL431做12V恒流输出 【得捷Follow me第3期】XIAO主板交作业 汇编与C语言混合编程的关键问题 日历 PWM 控制的蜂鸣器 驱动问题 给大家推荐一本书《控制系统设计指南》
简洁的过零调功器电路设计与分析 单稳态控制电路设计与分析 光控电路设计与分析 永不缺相启动运行的电动机控制电路 IGBT模块通过控制门极阻断过电流 MT3608构成3.7V转12V的升压电路图 运算放大器IC741的基本工作原理及在电路中的实现方式 比较常见的功率整流器和滤波电路 一个简单的红外耳机电路 基于TDA1554的立体声放大器电路
器件捷径:
E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ
需要登录后才可以下载。
登录取消