首页 > 器件类别 > 无源元件

VLS201610CX-4R7M

Fixed Inductors 4.7uH 0.92A 365mOhms Pwr Circuit Inductor

器件类别:无源元件   

厂商名称:TDK(株式会社)

厂商官网:http://www.tdk.com

下载文档
VLS201610CX-4R7M 在线购买

供应商:

器件:VLS201610CX-4R7M

价格:-

最低购买:-

库存:点击查看

点击购买

器件参数
参数名称
属性值
Product Attribute
Attribute Value
制造商
Manufacturer
TDK(株式会社)
产品种类
Product Category
Fixed Inductors
RoHS
Details
电感
Inductance
4.7 uH
容差
Tolerance
20 %
最大直流电流
Maximum DC Current
1.18 A
最大直流电阻
Maximum DC Resistance
0.365 Ohms
最小工作温度
Minimum Operating Temperature
- 40 C
最大工作温度
Maximum Operating Temperature
+ 105 C
测试频率
Test Frequency
1 MHz
产品
Product
Power Inductors
屏蔽
Shielding
Shielded
端接类型
Termination Style
SMD/SMT
长度
Length
2 mm
宽度
Width
1.6 mm
高度
Height
1 mm
系列
Packaging
Cut Tape
系列
Packaging
MouseReel
系列
Packaging
Reel
类型
Type
Wound Ferrite Inductor for Power Circuits
芯体材料
Core Material
Ferrite
工厂包装数量
Factory Pack Quantity
2000
单位重量
Unit Weight
0.000529 oz
文档预览
I N D U C T O R S
August 2017
Inductors for power circuits
Wound ferrite
VLS-CX-1 series
VLS201610CX-1
type
VLS201610CX-1
(2/9)
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20170810 / inductor_commercial_power_vls201610cx-1_en.fm
(3/9)
I N D U C T O R S
Inductors for power circuits
Wound ferrite
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Overview of VLS201610CX-1 type
FEATURES
Magnetic shield type wound inductor for power circuits using a ferrite magnetic material.
High magnetic shield construction and compatible with high-density mounting.
Larger current and lower Rdc were achieved by optimizing the ferrite core figure.
APPLICATION
Smart phones, tablet terminals, HDDs, SSDs, DVCs, DSCs, mobile display panels, portable game devices, compact power supply
modules, other
PART NUMBER CONSTRUCTION
VLS
Series name
201610
L×W×H Dimensions
(mm)
201610
2.0×1.6×1.0
C
Internal code 1
X
Internal code 2
-
R24
Inductance
(µH)
R24
0.24
2R2
2.2
100
10
M
Inductance
tolerance
M
±20%
-
1
Marking
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Type
Package quantity
Individual weight
Operating
Storage
temperature
temperature

(pieces/reel)
(°C)
(°C)
VLS201610CX-1
–40 to +105
–40 to +105
2000

Operating temperature range includes self-temperature rise.

The Storage temperature range is for after the circuit board is mounted.
(mg)
15
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170810 / inductor_commercial_power_vls201610cx-1_en.fm
(4/9)
I N D U C T O R S
VLS201610CX-1 type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Peak
Natural
cooling
T4
T:
Temperature
T3
T3
T2
T1
t1
t3
t2
t:
Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30s
Peak
Temp.
T4
260°C
Time
t3
10s
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170810 / inductor_commercial_power_vls201610cx-1_en.fm
(5/9)
I N D U C T O R S
VLS201610CX-1 type
SHAPE & DIMENSIONS
1.6±0.2
2.0±0.2
(0.65)
(0.7)
(0.65)
1.0max.
Dimensions in mm
RECOMMENDED LAND PATTERN
0.65
0.7
2.0
0.65
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
1.6
20170810 / inductor_commercial_power_vls201610cx-1_en.fm
查看更多>
参数对比
与VLS201610CX-4R7M相近的元器件有:VLS201610CX-1R0M、VLS201610CX-6R8M、VLS201610CX-R47M、VLS201610CX-3R3M、VLS201610CX-R24M、VLS201610CX-100M、VLS201610CX-150M、VLS201610CX-220M、VLS201610CX-R68M。描述及对比如下:
型号 VLS201610CX-4R7M VLS201610CX-1R0M VLS201610CX-6R8M VLS201610CX-R47M VLS201610CX-3R3M VLS201610CX-R24M VLS201610CX-100M VLS201610CX-150M VLS201610CX-220M VLS201610CX-R68M
描述 Fixed Inductors 4.7uH 0.92A 365mOhms Pwr Circuit Inductor Fixed Inductors 1.0uH 1.95A 79mOhms Pwr Circuit Inductor Fixed Inductors 6.8uH 0.73A 582mOhms Pwr Circuit Inductor Fixed Inductors 0.47uH 3.5A 50mOhms Pwr Circuit Inductor Fixed Inductors 3.3uH 1.12A 253mOhms Pwr Circuit Inductor Fixed Inductors 0.24uH 4.35A 40mOhms Pwr Circuit Inductor Fixed Inductors 10uH 0.662A 732mOhms Pwr Circuit Inductor Fixed Inductors 15uH 0.49A 1258mOhms Pwr Circuit Inductor Fixed Inductors 22uH 0.42A 1582mOhms Pwr Circuit Inductor Fixed Inductors 0.68uH 2.81A 76mOhms Pwr Circuit Inductor
Product Attribute Attribute Value Attribute Value Attribute Value Attribute Value Attribute Value Attribute Value Attribute Value Attribute Value Attribute Value Attribute Value
制造商
Manufacturer
TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社) TDK(株式会社)
产品种类
Product Category
Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors Fixed Inductors
RoHS Details Details Details Details Details Details Details Details Details Details
电感
Inductance
4.7 uH 1 uH 6.8 uH 470 nH 3.3 uH 240 nH 10 uH 15 uH 22 uH 680 nH
容差
Tolerance
20 % 20 % 20 % 20 % 20 % 20 % 20 % 20 % 20 % 20 %
最大直流电流
Maximum DC Current
1.18 A 2.52 A 930 mA 3.5 A 1.41 A 4.35 A 830 mA 630 mA 560 mA 2.81 A
最大直流电阻
Maximum DC Resistance
0.365 Ohms 0.079 Ohms 0.582 Ohms 0.05 Ohms 0.253 Ohms 40 mOhms 732 mOhms 1.258 Ohms 1.582 Ohms 76 mOhms
最小工作温度
Minimum Operating Temperature
- 40 C - 40 C - 40 C - 40 C - 40 C - 40 C - 40 C - 40 C - 40 C - 40 C
最大工作温度
Maximum Operating Temperature
+ 105 C + 105 C + 105 C + 105 C + 105 C + 105 C + 105 C + 105 C + 105 C + 105 C
测试频率
Test Frequency
1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz 1 MHz
产品
Product
Power Inductors Power Inductors Power Inductors Power Inductors Power Inductors Power Inductors Power Inductors Fixed Inductors Fixed Inductors Fixed Inductors
屏蔽
Shielding
Shielded Shielded Shielded Shielded Shielded Shielded Shielded Shielded Shielded Shielded
端接类型
Termination Style
SMD/SMT SMD/SMT SMD/SMT SMD/SMT SMD/SMT SMD/SMT SMD/SMT SMD/SMT SMD/SMT SMD/SMT
长度
Length
2 mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm 2 mm
宽度
Width
1.6 mm 1.6 mm 1.6 mm 1.6 mm 1.6 mm 1.6 mm 1.6 mm 1.6 mm 1.6 mm 1.6 mm
高度
Height
1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm
类型
Type
Wound Ferrite Inductor for Power Circuits Wound Ferrite Inductor for Power Circuits Wound Ferrite Inductor for Power Circuits Wound Ferrite Inductor for Power Circuits Wound Ferrite Inductor for Power Circuits Wound Ferrite Inductor for Power Circuits Wound Ferrite Inductor for Power Circuits Wirewound Wirewound Wirewound
芯体材料
Core Material
Ferrite Ferrite Ferrite Ferrite Ferrite Ferrite Ferrite Ferrite Ferrite Ferrite
工厂包装数量
Factory Pack Quantity
2000 2000 2000 2000 2000 2000 2000 2000 2000 2000
系列
Packaging
Reel Reel Reel Reel Reel Reel Reel Reel Reel Reel
买数码IT产品的朋友一定要去看看,肯定会有优惠惊喜啊!
领航数码科技商城长期特价促销各种品牌的手机.电脑。及3折批发全国通用的手机充值卡。 充值方法:移动...
jhitkj88 淘e淘
STM32G系列定时器TIM7奇怪的死机问题!
我在使用开发板STM32G431做定时器实验时遇到一个奇怪的问题。 TIM6和TIM7同样的代码...
bigbat stm32/stm8
压电超声换能器驱动和电阻抗匹配电路设计
超声驱动电源和超声换能器之间存在着严重的阻抗失配,造成二者之间的能量传输效率较低,换能器无法从驱...
bingzhi 模拟电子
满足汽车高温应用环境要求的传感器接口IC
现代汽车中传感器的数量近年来快速增长,因为汽车制造商希望改善对关键的汽车动力总成、稳定性和安全应用的...
frozenviolet 汽车电子
AD9854输出IQ正交扫频信号最大幅值是多少?
我用AD9854发出两路IQ正交扫频信号,用的是AD9854的单端输出模式,IQ均为单端输出,请问各...
小二红 ADI参考电路
zuanfen sujie
0 zuanfen sujie 0 ...
nanhe 嵌入式系统
热门器件
热门资源推荐
器件捷径:
00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W
需要登录后才可以下载。
登录取消