Insertion Tool for CTX280 Seal Plugs
Insertion
Tool
Application Tooling
Specification Sheet
Order No. 63812-0900
FEATURES
This Insertion Tool is designed for the insertion of CTX280 Seal Plugs into a CMX connector.
SCOPE
Products:
CTX280 Seal Plug for CMX Modules.
Seal Plug Order No.
98492-1091
198009-1001
198009-1021
198009-1051
198009-2001
198009-1002
198009-1023
198009-1053
198009-2002
Female Module Order No
198009-1003 198009-1004
198009-1031 198009-1033
198009-1061 198009-1063
198009-2003 198009-2004
198009-1011
198009-1041
198009-1071
198009-2011
198009-1013
198009-1043
198009-1073
OPERATION:
1. The seal plug has a specific direction in which it is inserted into the CMX Module See Figure 1.
CMX MODULE
PUSH THE
INSERTION
TOOL INTO
WIRE SEAL
CTX SEAL
Figure 1
Doc No: ATS-638120900
Revision: B
Release Date: 04-06-11
Revision Date: 01-27-17
UNCONTROLLED COPY
Page 1 of 2
Insertion Tool for CTX280 Seal Plugs
2. Gently push the seal plug with the insertion tool into the desired cavity of the CMX Module.
3. The seal plug should be inserted approximately 14.7mm from the opening in the module. See Figure 2.
CMX
MODULE
INSERTION
TOOL
Figure 2
CTX SEAL
14.7mm
4. Molex does not offer repair parts for Insertion Tools due to the inexpensive nature of these tools.
CAUTION:
Molex specifications are valid only when used with Molex terminals, modules, and tooling.
Contact Information
For more information on Molex application tooling please contact Molex at 1-800-786-6539.
Visit our Web site at http://www.molex.com
Doc No: ATS-638120900
Revision: B
Release Date: 04-06-11
Revision Date: 01-27-17
UNCONTROLLED COPY
Page 2 of 2
