SPECIFICATION CONTROL DRAWING
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Transparent clear.
2. SOLDERSHIELD DEVICE: Tin plated copper braid with flux.
3. DIELECTRIC BARRIER: Cross-linked polyvinylidene fluoride. Color: yellow.
4. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
5. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX:
TYPE ROL1 per ANSI J-STD-004.
6. INSULATION TUBING: Precoated, radiation cross-linked modified polyolefin with adhesive. Color: black.
APPLICATION
1. This controlled soldering device is designed to splice the center conductor and the braid, both made of bare tin or silver plated
copper, of coaxial cables having an insulation temperature rated for at least +85°C. The product is suitable for single or double
braided cables.
2. Temperature range: -55°C to +125°C.
3. For installation procedure: See RPIP-699-00.
Cable Dimensions:
*A trademark of Tyco Corporation.
Tyco Electronics Corporation
305 Constitutional Drive
Menlo Park, CA 94025 USA
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
ANGLES: N/A
Tyco reserves the right to amend this drawing at any
time. Users should evaluate the suitability of the
product for their application.
DCR NUMBER:
PROD. REV.:
RAYCHEM
Products
TITLE:
COAXIAL CABLE SPLICE KIT
DOCUMENT NO.:
DATE:
B-202-81
DOC ISSUE:
ROUGHNESS IN
MICRON
REPLACES:
Sept. 17, 1998
SCALE:
SIZE:
2
SHEET:
R. MAPALO
B20281
D981685
A
NONE
A
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
嵌入式系统
