SMD Comm C0G, Ceramic, 1.5 pF, +/-0.1 pF, 50 VDC, C0G, SMD, MLCC, Ultra-Stable, Low Loss, Class I, 0402
General Information
Supplier:
Series:
Style:
Description:
Features:
RoHS:
Termination:
Marking:
Miscellaneous:
Chip Size:
KEMET
SMD Comm C0G
SMD Chip
SMD, MLCC, Ultra-Stable, Low
Loss, Class I
Ultra-Stable, Low Loss, Class I
Yes
Tin
No
Note: KEMET 50V rated parts
may be operated at 63 Volts
0402
Dimensions
L
W
T
S
B
1mm +/-0.05mm
0.5mm +/-0.05mm
0.5mm +/-0.05mm
0.3mm MIN
0.3mm +/-0.1mm
Specifications
Capacitance:
Capacitance Tolerance:
Voltage DC:
Dielectric Withstanding
Voltage:
Temperature Range:
Temperature Coefficient:
Dissipation Factor:
Aging Rate:
Insulation Resistance:
1.5 pF
+/-0.1 pF
50 VDC
125 V
-55/+125C
C0G
0.10% 1MHz 25C
0% Loss/Decade Hour
100 GOhms
Packaging Specifications
Packaging:
Packaging Quantity:
T&R, 180mm, Paper Tape
10000
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and
we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the
requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us
with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Ⅱ、本文要点 网上很多人问：“我之前用IAR for ARM V5或V6建立好的工程，在IED升级到V7之后，打开以前的工程，编译出来一大堆错误？”。 IAR for ARM在版本升级之后，工具链存在略微的差异，下面新建工程过程将会说到这些问题。 按照Keil（MDK-ARM）新建软件工程的思路，将内容分为准备工作和新建工程两大步骤来讲述。 本文基于STM32F1系列芯片为例来讲述（...[详细]
新一代无綫通讯解决方桉提供商RFaxis公司近日宣佈，在6月2日开幕的Computex Taipei上展示全球首创的单晶片即插即用RF 前端晶片（Front-end Integrated Circuit，RFeIC)和解决方桉，可用来替代目前无綫装置中的尺寸较大的多晶片（Multi-Die）前端模组(FEM, Front End Module)，其中包括7项已经申请美国和国际专利的技术。R...[详细]
单片机
