straight plug with cable collet, 1Y series, high voltage 5kV, outer shell in chrome plated brass, PEEK insulator, 1 male sol-
der contact, C type collet for a 3,2 mm diameter cable.
Fixed socket
ERA
1Y
405
C
T
L
Model
Series
Type
Housing: from page 61
Variant: see note
1)
Contact: from page 61
Insulator: from page 61
ERA.1Y.405.CTL =
fixed socket, nut fixing, 1Y series, high voltage 5kV, outer shell in chrome plated brass, PTFE insulator, 1 female solder contact.
Fixed coupler
SWH
1S
405
C
L
M
Model
Series
Type
Housing: from page 61
Variant: see note
1)
Contact: see note
2)
Insulator: from page 61
SWH.1S.405 =
straight coupler, nut fixing, 1S series, high voltage firm, outer shell in chrome plated brass, PEEK insulator, 1 female contacts each end.
Note:
1)
the „Variant” position in the reference is used to specify either the presence of a collet nut for fitting the bend relief or the anodized colour of the housing in aluminium alloy.
For models with collet nut for fitting the bend relief, a „Z” should be indicated and a bend relief can be ordered separately as indicated in the „Accessories” section. An order for a connector with bend relief should thus includee two
part numbers.
For the various housings available in colours, the corresponding letter in the part number for the colour see Unipole/Multipole catalogue.
For the watertight models of socket, the letter „P” is used; for the vacuumtight models of socket the letters „PV” shall be indicated.
For the plug and socket that should be filted with an FPM O-ring the letter „H” shall be indicated.
2)
Variants see Unipole/Multipole catalogue.
3
Steckverbindungen
Connectors
Ko n t a k t f i g u r a t i o n
Contactfiguration
Kabel
Cable
Ko n f e k t i o n i e r u n g s a n l e i t u n g
测试/测量
