PWC2010-18KJI,PWC2010-18KJI pdf中文资料,PWC2010-18KJI引脚图,PWC2010-18KJI电路-Datasheet-电子工程世界

文档预览

Resistors

Pulse Withstanding

Chip

Withstanding

Pulse

Resistors

Chip Resistors

PWC Series

Welwyn Components

Excellent

PWC Series

pulse withstand performance

Improved working voltage

Excellent pulse withstand performance

Improved power

voltage

Improved working

rating

Standard chip sizes (0805 to 2512)

Improved power rating

Custom

designs available

Custom

designs available

Anti-sulphur version available

All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2)

Electrical Data

Size

Power @70°C

Resistance range

Tolerance

LEV

TCR

Operating temperature

Thermal Impedance

Pad / trace area *

Values

Pulse Capability

ohms

ppm/°C

°C

°C/W

302

220

160

150

PWC0603

0.125

PWC0805

0.25

PWC1206

0.33

0.5

1R0 to 10M

10R to 1M: 0.5, All values: 1, 5

200

-55 to +155

145

125

250

100

500

400

<10R:200

≥10R:100

500

PWC2010

0.75

PWC2512

1.5

E24 or E96 preferred - other values to special order

See graphs – full application note available on request

*Recommended minimum pad & adjacent trace area for each termination for rated power dissipation on FR4 PCB

Physical Data

Dimensions (mm) & weight (mg)

0603

0805

1206

2010

2512

1.6±0.1

2.0±0.15

3.2±0.2

5.1±0.3

6.5±0.3

0.8±0.1

1.25±0.15

1.6±0.2

2.5±0.2

3.2±0.2

T max

0.55

0.6

0.7

0.8

0.3±0.15

0.4±0.2

0.6±0.3

B min

0.6

0.9

1.7

3.0

4.4

0.3±0.15

0.3±0.1

0.4±0.15

0.6±0.25

Wt.

2.2

4.7

8.5

Wrap-around terminations

(3 faces)

Construction

Thick film resistor material, overglaze and organic protection

are screen printed on a 96% alumina substrate. Wrap-around

terminations have an electroplated nickel barrier and solder

coating, this ensures excellent ‘leach’ resistance properties

and solderability.

Note that anti-sulphur version parts below 100R are

produced in flip-chip format with the resistor element on

the underside.

Marking

Components are not marked. Reels are marked with type,

value, tolerance, date code and quantity.

Solvent Resistance

The body protection is resistant to all normal industrial

cleaning solvents suitable for printed circuits.

General Note

Welwyn Components reserves the right to make changes in product specification

or liability.

TT Electronics reserves the right to make changes in product specification without notice

without notice or liability.

All information is subject to Welwyn’s own data and is considered accurate at time of going to print.

All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.

BI Technologies IRC Welwyn

A subsidiary of

TT electronics plc

www.ttelectronics.com/resistors

07. 08

03.18

· Bedlington, Northumberland NE22 7AA, UK

822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com

Telephone: +44 (0) 1670

Pulse Withstanding

Chip Resistors

PWC Series

Welwyn Components

Performance Data

Size

Load at rated power: 1000 hours at 70°C

Shelf life test: 12 months at room temperature

Derating from rated power at 70°C

Overload: 6.25 x rated power for 2 seconds

Dry heat: 1000 hours at 155°C

Long term damp heat

Temperature rapid change

Resistance to solder heat

Resistance to sulphur-bearing gas (AS version only): ASTM-B-809

Voltage proof

Volts

Note: A 0.01 Ohm addition to be added to the performance of all resistors <10 Ohms.

ΔR%

0.25

500

ΔR%

Maximum

0.1

Zero at 155°C

0.1

0.2

0.25

0.05

Typical

0.25

0.02

Pulse Performance Data

Lightning Surge

Lightning surge resistors are tested in accordance with IEC 60 115-1 using both 1.2/50µs and 10/700µs pulse shapes. 10 pulses are applied. The limit of

acceptance is a shift in resistance of less than 1% from the initial value.

2512

2010

1206

0805

0603

Lightning Surge

Lightning surge resistors are tested in

accordance with IEC 60 115-1 using

both 1.2/50µs and 10/700µs pulse shapes.

10 pulses are applied. The limit of

acceptance is a shift in resistance of less

than 1% from the initial value.

2512

2010

1206

0805

0603

General Note

TT Electronics reserves the right to make changes in product specification without notice or liability.

All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.

BI Technologies IRC Welwyn

www.ttelectronics.com/resistors

Bedlington, Northumberland NE22 7AA, UK

Telephone: +44 (0) 1670

822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com

07. 08

03.18

Pulse Withstanding

Chip Resistors

PWC Series

Single Impulse

The single impulse graph is the result of 50 impulses of rectangular shape applied at one minute intervals. The limit of acceptance was a shift in

resistance of less than 1% from the initial value.

2512

2010

1206

0805

0603

Continuous Load Due to Repetitive Pulses

The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average

power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the

initial value

2512

2010

1206

0805

0603

General Note

TT Electronics reserves the right to make changes in product specification without notice or liability.

All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.

BI Technologies IRC Welwyn

www.ttelectronics.com/resistors

03.18

Pulse Withstanding

Chip Resistors

PWC

Series

PWC

Series

Welwyn Components

Thermal Performance Data

% of Rated Power

Temperature Derating Curve

125

100

-15

Ambient Temperature /°C

155

Packaging

0603, 0805 and 1206 resistors are supplied on 8mm carrier tape and 2010 and 2512 resistors are supplied on 12mm carrier tape,

all on 7 inch reels as per IEC 286-3.

Application Note

PWC resistors themselves can operate at a maximum temperature of 155°C. For soldered resistors, the joint temperature should not exceed 110°C. This

condition is met when the stated power levels at 70°C and recommended pad and trace areas are used. Pad and trace area is defined as the total area of

the solder pad plus all copper trace within two squares of the edge of the solder pad. Allowance should be made if smaller areas of copper are used.

This

product has two valid part

part numbers:

This

product has two valid

numbers:

Ordering Procedure

A full Application Note on the PWC Series is available.

European (Welwyn) Part Number: PWC2512-2K0JI

(2512, 2 kilohms ±5%, Pb-free)

Type

Size

Anti-Sulphur

Value

Tolerance

D = ±0.5%

F = ±1%

J = ±5%

Termination & Packing

I = Standard,

0603

5000/reel

0805, 1206,

3000/reel

2010

2512

1800/reel

All sizes

1000/reel

PWC 0603 Omit for standard E24 = 3/4 characters

0805 AS = Anti-sulphur E96 = 3/4 characters

1206

R = ohms

2010

K = kilohms

2512

M = megohms

USA (IRC) Part Number: PWC-PWC2512LF-2K00-J

PWC

Size

1206

2010

2512

Termination

Value

(2512, 2 kilohms ±5%, Pb-free)

Tolerance

Packing

Plastic tape

1206, 2010

2512

3000/reel

1800/reel

Family Model

Omit for SnPb E24 = 4 characters D = ±0.5%

LF = Pb-free E96 = 4 characters F = ±1%

R = ohms

J = ±5%

K = kilohms

M = megohms

Bedlington, Northumberland NE22 7AA, UK

General Note

Telephone: +44 (0) 1670 822181

make changes in product specification

Email: info@welwyn-tt.com · Website: www.welwyn-tt.com

TT Electronics reserves the right to

· Facsimile: +44 (0) 1670 829465 ·

without notice or liability.

BI Technologies IRC Welwyn

09. 09

www.ttelectronics.com/resistors

All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.

03.18

[平头哥RVB2601创意应用开发]+02流水灯: +0 2 流水灯了解了开发板和工作环境后，现在尝试流水灯实验，在《 RVB2601原理图 ...; chg0823 玄铁RISC-V活动专区

只需要提交一个WEBENCH设计，这个活动很给力啊！: 只需要提交一个WEBENCH设计，就可以获得 TI样片申请绿色通道，还有机会获得免费的 ...; soso 模拟与混合信号

电子萌新一枚: 现在公司用的最多的电路仿真软件是哪款？电子萌新一枚 mutisim 好的，谢谢您 ...; wd123 模拟电子

Qorvo推出新一代电路仿真软件QSPICE，有小伙伴体验了的么？（有安装包可直接下载）: 管管看到Qorvo家推出了新一代的电路仿真软件QSPICE，号称通过提高仿真速度，功能和可靠性，为...; okhxyyo 电源技术

【TI首届低功耗设计大赛】基本功能达成: 本帖最后由 ljj3166 于 2014-11-2 14:47 编辑下周又要外出周末...; ljj3166 微控制器 MCU

北京君正案例实现高速高质量打印技术-国产主控芯片: 　　3D打印技术持续演变，高速打印机以前所未有的速度改变着3D打印的规则。K1 Max作...; 雷龙发展测试/测量

这个设备可以通过血液检测出多种癌症

虽然技术在不断发展，但面对癌症，人类仍然没有找到有效的解决方法。目前，最有效的应对方式依然是提早发现病症，但由于检测过于麻烦，大部分人并不会去主动检测，尤其是年轻人。现在，一种可以在家中通过血液检测出多种癌症的设备“Miroculus”即将问世，或许会帮助人类更好地抗衡癌症。 Miroculus的研发团队由来自希腊、智利、美国、墨西哥的生物科学家、企业家、医生及工程师...[详细]
浅谈无线通信技术行业的发展与变化

人物背景： Jason Li，现任LitePoint中国区运营管理总监，曾任爱立信产品行销经理及大唐移动部门经理，拥有十多年跨文化、跨行业和跨领域的市场、技术和运营管理方面的经验。一、无线通信科技发展现状　　无线通信技术的发展可谓日新月异，我们重点讨论其中最热门的两个分支，其一是移动通信技术，如2G（GSM，CDMA），3G（WCDMA，CDMA2000，TD-SCDMA）...[详细]
沈阳自动化所5G毫米波射频链路压缩研究领域初见成效

近日，由中国科学院沈阳自动化研究所团队与以色列魏茨曼科学院（Weizmann Institute of Science）研究团队，联合提出了针对多输入多输出（Multiple-Input Multiple-Output， MIMO）无线通信系统的射频链路压缩理论与算法，并搭建了相应的硬件原型系统。硬件原型系统信息流图（上），硬件原型系统及其子系统实物图（下）该成果为5G...[详细]
把零电压开关技术应用在降压稳压器上

对降压稳压器的关键要求通常是尺寸和效率。由于印制电路板面积弥足珍贵，哪个设计人员也不愿意分配额外的空间给功率设计方案。此外，由于单片机和数字信号处理器(DSP)不断推陈出新, 电路板设计方案也不断升级,尽管功率有所增加，但产品尺寸却不能增大了。因此，高密度稳压器便随着最新IC集成度的提高、MOSFET技术的提升及封装工艺的改良而不断发展。纵使这样, 这些稳压器还是无法满足新系统的应用要求。尤其是...[详细]
5G时代需要大合作用“中国智慧”赢得发展

　　“ 联想 5G 投票”事件有了最新进展，联想公众账号今日刊发了《致所有联想人的一封信》，并由柳传志、杨元庆、朱立南联合署名，表达了“捍卫荣誉”“不容波脏水”的态度。有业内人士表示，当前各国都在争夺 5G 时代的话语权，相信中国通讯产业有足够的行业智慧赢得发展先机。下面就随网络通信小编一起来了解一下相关内容吧。　　近日，一则“ 5G 标准投票中，联想没投给华为投给高通”的消息在网络...[详细]
开启液流电池新时代宿迁时代储能完成亿元A轮融资

液流储能电池研发商宿迁时代储能科技有限公司（简称「宿迁时代储能」）近日完成A轮亿元融资，本轮融资由高瓴创投（GL Ventures）领投，邦盛资本、苏创投、产发创投等多方跟投。融资将主要用于技术研发、产品量产和市场开拓等方面。宿迁时代储能成立于2021年，是一家 ... ...[详细]
iPhone 8官网现货了!但果粉们都在等iPhone X

虽然iPhone 8系列重新换回了玻璃后壳设计，但是外形变化不大的它，在上市当天就出现了渠道破发价的现象。看来从iPhone 6开始就沿用的外观设计，真的让果粉们太失望了。　　当然，出现这种情况不能怪iPhone 8不给力，因为即将到来的iPhone X更加给力，所以更多的果粉都在持币观望。等iPhone X预约发售的时候，就狠狠地出手了。　　现在苹果官网上，iPhone 8全系产品已经...[详细]
汇顶董秘廖崇清请辞继续担任财务负责人

和讯股票消息11月13日晚间，汇顶科技发布公告称，公司副总经理、财务负责人、董事会秘书廖崇清先生因分管工作调整，将不再负责公司董事会秘书相关工作，董事会已收到廖崇清先生的辞职申请。廖崇清先生之后将继续担任公司副总经理、财务负责人职务。和讯上市公司数据库显示，廖崇清先生，1969年出生,中国籍,无境外永久居留权,本科学历。曾就职于中国农业银行(601288,股吧)福建宁化支行、深圳市豪...[详细]
消息称台积电先进封装客户大幅追单，2024年月产能拟拉升120%

11 月 13 日消息，据台湾经济日报，台积电 CoWoS 先进封装需求迎来爆发，除英伟达已经在 10 月确定扩大订单外，苹果、AMD、博通、Marvell 等重量级客户近期同样大幅追单。据称，台积电为应对上述五大客户需求，已经在努力加快 CoWoS 先进封装产能扩充脚步，预计明年月产能将比原目标再增加约 20% 达 3.5 万片。业界人士分析称，台积电五大客户大追单，表明 AI 应用已...[详细]
珑璟光电联手上海理工大学研发新型AR光学方案

国内领先的近眼虚拟显示模组提供商珑璟光电宣布，与国内光学领域研发权威科研机构上海理工大学签约合作，投入超百万元，布局新型 AR （增强现实）和近眼显示光学方案的开发。珑璟光电此前已经成功推出阵列光波导AR光学模组，视场角达到业内领先的40度，受到业内的一致认可。本次与上海理工大学联合研发的新型光学方案，是在近眼显示技术上的一次新尝试，也是珑璟光电对自主知识产权、对未来AR光学技术发展跟...[详细]
台积电之后，三星发展扇出型晶圆级封装制程

韩媒报导，三星电子2018年将开发新半导体封装制程，企图从台积电手中抢下苹果处理器订单。面对三星强势抢单，台积电表示，不评论竞争对手动态，强调公司在先进制程持续保持领先优势，对明年营运成长仍深具信心。三星与台积电先前曾分食苹果处理器代工订单，之后台积电靠着前段晶圆制造能力和新封装技术，于2016年独拿苹果所有订单。台积电供应链分析，台积电7nm制程发展脚步领先三星，且与苹果的合作关系稳固，...[详细]
合肥长鑫发力,去年设备进口47.9亿名列安徽外贸第二

从合肥海关获悉，合肥长鑫存储技术有限公司旗下子公司睿力集成电路有限公司去年进口47.9亿元，外贸值居安徽省第2位。睿力集成电路有限公司主要研发19纳米制程的12英寸晶圆DRAM，预算为人民币180亿元，睿力集成电路由GigaDevice与合肥市产业投资控股集团合资，GigaDevice出资20%，目标2018年12月底研发成功。中国DRAM产业目前已有福建晋华、合肥长鑫两大阵营。福建晋华专注...[详细]
豪威科技推全球首款汽车晶圆级摄像头，较传统摄像头大有不同？

6 月 5 日讯，近日，豪威科技推出全球首款汽车晶圆级摄像头 ——OVM9284 CameraCubeChip™模块，这是全球最小的一款汽车摄像头，可为驾驶员监控硬件提供一站式服务，在无光环境中具有优质成像性能。该模块样品现已上市，预计可在 2020 年第四季度实现量产。所有 CameraCubeChip 模块都支持回流焊，这意味着，他们可以安装到印刷电路板与其他组件同时使用自...[详细]
两通道波形的测量参数能否同时显示？

两通道波形的测量参数可以同时显示。ZDS2022示波器支持51种自动测量参数，可以同时测量显示24种参数，如图7.1所示。其中，测量项符号后的“(C1)”、“(C2)”指示通道编号，“C1”为通道1，“C2”为通道2。同时测量显示两通道的参数时，只需按下【Measure】打开设置菜单，切换通道选择对应的测量参数即可。图7.1参数统计测量 ...[详细]
协鑫能科江苏连云港区域首个用户侧储能项目并网投运

　　10月18日下午5点，江苏中金玛泰医药包装有限公司用户侧储能项目倒送电，顺利并网投运。该项目是协鑫能科综合能源服务在连云港区域投运的首个用户侧储能项目。　　该项目总容量1.075兆瓦时，额定充放电功率为500千瓦。项目采用五台215千瓦时的柜式储能装置，通过一台并网柜接入业主华盖变10KV正大线2#变压器低压侧。该储能一体柜采用目前应用广泛的磷酸铁锂电芯，冷却方式为液...[详细]