Data Sheet
RC-115S
Momentary switch type relay
(3 wire)
Each Remcon relay, unlike any other low voltage relay, has a
built-in transformer for unit control. Each relay in the system
operates independently from and has no effect upon other
relays. You can economically install as little as one relay and
operate it with as many switches as is desired.
Relay cannot burn out if low voltage switch legs are shorted
* Where code permits
** Only two wires for closet light relay
■
Switches AC power ON and OFF using low voltage control
circuit
No hassle
warranty
No waiting.
No shipping
charges.
Our commitment to
high-quality products
and customer service
is demonstrated by
our industry exclusive
“No Hassle” warranty.
In the unlikely event
that an Amprobe Test
Tool requires warranty
service, any of our
local dealers are
authorized to replace
it, on the spot.
(note: $500 MSLP limit)
■
Single relay can be controlled by multiple switches and
multiple relays can be controlled by single switch
■
Light #22 gauge cable can be used to control relay instead
of Romex or armored cable – significant time & cost
savings
■
Built in transformer, no step down transformers necessary
■
AC Voltage from 105 to 125 V
■
AC Current up to 6.5 A (1/4 HP max motor load at 120 V)
■
Frequency: 60 Hz
■
Safe control switching: 10 V DC max and 10 milliamps max
Amprobe® Test Tools
www.Amprobe.com
R-115S Momentary switch type relay (3 wire)
Applications
•
Industrial Control Applications
•
Where isolated low voltage is needed for safety reasons
•
Higher current applications (up to 6.5 amps, 1/2 HP)
•
Long distance remote operations
•
Hostile or hazardous environments
•
Alarms
•
Plant process controls
•
Computer control applications
•
Reduce control wiring costs and electrical inteference
•
Economically meet building codes in new installations
•
Applications where UL listed device is required.
Data Sheet
Optional Accessories
Part Number
RE-SW
MB-1
STA-1
SPR-1
SPR-2
SPR-3
Description
Switch
Mounting bracket
Solder-less connector
Switch plate, 1 gang Brushed Stainless Steel (can be painted)
Switch plate, 2 gang Brushed Stainless Steel (can be painted)
Switch plate, 3 gang Brushed Stainless Steel (can be painted)
Amprobe® Test Tools
website: www.Amprobe.com
email: info@amprobe.com
Everett, WA 98203
Tel: 877-AMPROBE
Amprobe® Test Tools Europe
Amprobe Test Tools Europe
Beha-Amprobe GmbH
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2009 Amprobe Test Tools. All rights reserved.
03/2009 3465229 Rev A
Amprobe® Test Tools
www.Amprobe.com
无线连接
