For resistors operated at an ambient temperature of 70°C or above, a
power rating shall be derated in accordance with the above derating curve.
ordering information
RN73
Type
2B
Size
1E
1J
2A
2B
2E
T
Termination
Material
T: Sn
L: SnPb
TE
For resistors operated terminal part temperature of described for each size
or above, a power rating shall be derated in accordance with derating curve.
Please refer to “Introduction of the derating curves based on the terminal
part temperature” in the beginning of our catalog before use.
1002
Nominal
Resistance
3 significant
figures + 1
multiplier
“R” indicates
decimal on
value <100Ω
B
Tolerance
A: ±0.05%
B: ±0.1%
C: ±0.25%
D: ±0.5%
F: ±1.0%
25
T.C.R.
(ppm/°C)
05
10
25
50
100
Packaging
TP: 0402: 7" 2mm pitch punch paper
TD: 0603, 0805, 1206, 1210:
7" 4mm pitch punched paper
TDD: 0603, 0805, 1206, 1210:
10" paper tape
TE: 0805, 1206, 1210:
7" embossed plastic
TED: 0805, 1206, 1210:
10" embossed plastic
For further information on packaging, please
refer to Appendix A
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
4/17/20
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
resistors
End of Life
Recommended Replacement RN73R
RN73
End of Life
Recommended Replacement RN73R
RN73
Absolute Absolute
Max.
Max.
Working Overload
(F±1.0%) Voltage Voltage
10 - 120k
50V
100V
10 - 120k
—
100 - 47k
75V
150V
10 - 360k
10Ω - 360k
10 - 360k
—
100 - 100k
10 - 1M
10 - 1M
10 - 1M
—
100 - 300k
10 - 1M
10 - 1M
10 - 1M
100 - 510k
10 - 1M
10 - 1M
10 - 1M
resistors
thin (metal) film flat chip resistors
applications and ratings
Power Rating
1
Rated
Resistance Range (Ω)
Rated
T.C.R.
@ 70°C
Terminal
Part
E-24, E-96, E-192*
Ambient
(ppm/°C)
High
Part
Designation
Max.
General Power Temp.
(A±0.05%) (B±0.1%) (C±0.25%) (D±0.5%)
Temp.
—
±25
100 - 100k 100 - 100k 10 - 120k
RN731E
70°C
75°C
.063W
—
±50
100 - 100k 100 - 100k 10 - 120k
—
±5
100 - 47k
—
—
1K - 47k
1K - 47k
±10
100 - 47k 100 - 47k 100 - 47k
RN731J
15 - 360k
15 - 360k 10 - 360k
70°C
75°C
.063W
.1W
±25
1K - 47k
—
±50
15 - 360k
15 - 360k 10 - 360k
±100
±5
±10
±25
±50
±100
±5
±10
±25
±50
±100
±10
±25
±50
—
100 - 100k
100 - 100k
51 - 100k
—
—
100 - 300k
100 - 300k
51 - 300k
—
—
100 - 510k
51 - 510k
—
—
—
100 - 100k
100 - 100k
15 - 1M
15 - 1M
—
100 - 300k
100 - 300k
15 - 1M
15 - 1M
—
100 - 510k
15 - 1M
15 - 1M
—
—
—
100 - 100k
15 - 1M
15 - 1M
—
—
100 - 300k
15 - 1M
15 - 1M
—
100 - 510k
15 - 1M
15 - 1M
—
10 - 360k
—
100 - 100k
10 - 1M
10 - 1M
10 - 1M
—
100 - 300k
10 - 1M
10 - 1M
10 - 1M
100 - 510k
10 - 1M
10 - 1M
10 - 1M
RN732A
.1W
.125W
70°C
80°C
150V
300V
RN732B
.125W
.25W
70°C
85°C
200V
400V
RN732E
.25W
—
1
Reliability performance is different. Please confirm the performance table.
* No marking on E-192 values
Operating Temperature Range: -55°C to +155°C
If any questions should arise whether to use the “Rated Ambient Temperature” or the “Rated Terminal Part Temperature”, please give priority to the “Rated Terminal Part
Temperature.” Prior to use and for more details refer to “Introduction of the derating curves on the terminal part temperature” in the beginning of the catalog.
environmental applications
Performance Characteristics
Parameter
Resistance
T.C.R.
Overload (Short time)
Resistance to Solder Heat
Rapid Change of Temperature
Moisture Resistance
Endurance at 70°C
High Temperature Exposure
EOL
70°C
95°C
±100
Requirement
∆
R ±(%+0.05Ω)
Limit
Typical
Within specified
—
tolerance
Within specified
—
T.C.R.
±0.01%
±0.03%
200V
400V
Test Method
25°C
+25°C/+125°C: T.C.R. = ±5 (X10
-6
/K)
+25°C/-55°C and +25°C/+125°C: all others
Rated Voltage x 2.5 or Max. overload voltage, whichever is less for 5 seconds
40°C ± 2°C, 90%-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
+125°C, 1000 hours
+155°C, 1000 hours
General: ±0.1%
High Power: ±0.5%
±0.1%
±0.25%
General: ±0.5%
High Power: ±0.5%
General: ±0.25%
High Power: ±0.5%
±0.25%
±0.5%
±0.04%
±0.03%
±0.06%
±0.07%
±0.02%
±0.1%
±0.1%
±0.25%
Precautions for Use
• The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts absorb on the top tapes to cause a failure
in the mounting and the parts are destructed by static electricity (1kV and more: 1J, 2A, 2B, 2E 0.5kV and more: 1E, Human Body Model 100pF 1.5kΩ) to change the resistance in the conditions of an excessive
dryness or after the parts are given vibration for a long time as they are packaged on the tapes. Similarly, care should be given not to apply the excessive static electricity when mounting on the boards.
• Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc. The flux may contain ionic substances
like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na ), chlorine (Cl−) etc. Therefore these kinds of ionic substances may induce electrical corrosion when they invade into
the products. Either thorough washing or using RMA solder and flux are necessary since lead free solder contains ionic substances. Washing process is needed, before putting on moisture proof material in
order to prevent electrical corrosion.
●
The upper electrodes could be peeled off when a heat-resistant masking tape is attached to the mounted chip resistors and then detached from them. It is confirmed that the adhesiveness gets stronger due to
the exposure to heat under mounting. Accordingly, we recommend the use of masking tape be refrained. If the use of heat-resistant masking tape is unavoidable, please make sure that the adhesives on the
tape do not directly come in contact with the product.
●
When high-pressure shower cleaning is implemented, there is a possibility of exfoliation of the top electrodes caused by the water pressure stress so please avoid the implementation.
●
If the implementation is unavoidable, then please evaluate the products beforehand.
For Surface Temperature Rise Graph see Environmental Applications. Additional environmental applications can also be found at www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
9/30/19
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
据外媒报道，加州大学圣地亚哥分校（University of California San Diego）的工程师采用新电解质开发出新锂离子电池，可在极冷和酷热的条件下表现良好，同时还能储存大量能量。这是因为新电解质不仅在较宽的工作温度范围内用途广泛、坚固耐用，而且还能与高能阳极和阴极兼容。 图片来源：加州大学圣地亚哥分校 这种电池可使 电动汽车 一次充电后，在寒冷天气下也可以行驶地...[详细]
富士通微电子（上海）有限公司宣布，由富士通微电子株式会社（前富士通LSI事业部）（“FML”）和台湾非官方组织财团法人咨询工业策进会（III）(*1)签署合作备忘录而成立的Fujitsu Global Mobile Platform公司（FMPI）自今日启动营运。FMPI将致力于为台湾的ODM供应商的WiMAX相关产品开发参考设计，不仅能提高其设计效率，而且能提供技术支持。 背景 ...[详细]
RF/无线
