USB82514AMR-B,USB82514AMR-B pdf中文资料,USB82514AMR-B引脚图,USB82514AMR-B电路-Datasheet-电子工程世界

文档预览

USB82514

Automotive Grade USB 2.0 Hi-Speed 4-Port Hub

Highlights

• High performance, low-power, small footprint hub

controller IC with 4 downstream ports

• Fully compliant with the USB 2.0 specification

• Enhanced OEM configuration options available

through either a single serial I

C™ EEPROM or

SMBus Slave Port

• MultiTRAK™ Technology

- High-performance multiple Transaction

Translator which provides one Transaction

Translator per port

• PortMap

- Flexible port mapping and port disable

sequencing

• PortSwap

- Programmable USB differential-pair pin loca-

tions ease PCB design by aligning USB sig-

nal traces directly to connectors

• PHYBoost

- Programmable USB transceiver drive

strength for recovering signal integrity due to

compromised system environment

• AEC-Q100 compliant

- Microchip’s parts are tested to meet or

exceed the requirements of the AEC-Q100

automotive qualification standards

Key Benefits

• Over 30 port configuration options

• Full power management with individual or ganged

power control of each downstream port

• Integrated 1.8 V core regulator

• Fully integrated USB termination and pull-up/pull-

down resistors

• On-board 24 MHz crystal driver, resonator, or

external 24 MHz clock input

• Customizable vendor ID, product ID, and device

• Easily configurable as a 2, 3 or 4-Port Hub in

common PCB layout

• 36-pin (6x6 mm

) QFN, RoHS compliant package

- Also available as dimple package

• Temperature range: -40ºC to +85ºC

Target Applications

•

Automotive head unit

Automotive breakout box

Automotive media player dock

Portable device charging via USB

Rear seat infotainment access



2014 Microchip Technology Inc.

60001234B-page 1

USB82514

TO OUR VALUED CUSTOMERS

It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip

products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and

enhanced as new volumes and updates are introduced.

If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via

E-mail at

docerrors@microchip.com.

We welcome your feedback.

Most Current Data Sheet

To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:

http://www.microchip.com

You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page.

The last character of the literature number is the version number, (e.g., DS30000000A is version A of document DS30000000).

Errata

An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for cur-

rent devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the

revision of silicon and revision of document to which it applies.

To determine if an errata sheet exists for a particular device, please check with one of the following:

• Microchip’s Worldwide Web site;

http://www.microchip.com

• Your local Microchip sales office (see last page)

When contacting a sales office, please specify which device, revision of silicon and data sheet (include -literature number) you are

using.

Customer Notification System

www.microchip.com

to receive the most current information on all of our products.

60001234B-page 2



2014 Microchip Technology Inc.

USB82514

Table of Contents

1.0 Introduction ..................................................................................................................................................................................... 4

2.0 Acronyms ........................................................................................................................................................................................ 6

3.0 Pin Configuration ............................................................................................................................................................................ 7

4.0 Pin Table ......................................................................................................................................................................................... 8

5.0 Block Diagram ................................................................................................................................................................................. 9

6.0 Pin Descriptions ............................................................................................................................................................................ 10

7.0 Configuration Options ................................................................................................................................................................... 15

8.0 DC Parameters ............................................................................................................................................................................. 39

9.0 AC Specifications .......................................................................................................................................................................... 44

10.0 Package Outline .......................................................................................................................................................................... 45

Appendix A: Data Sheet Revision History ........................................................................................................................................... 47

The Microchip Web Site ...................................................................................................................................................................... 49

Customer Change Notification Service ............................................................................................................................................... 49

Customer Support ............................................................................................................................................................................... 49

Product Identification System ............................................................................................................................................................. 50



2014 Microchip Technology Inc.

60001234B-page 3

USB82514

1.0

INTRODUCTION

The Microchip Automotive Grade USB 2.0 4-Port Hub is a low-power, OEM configurable, MTT (Multi- Transaction Trans-

lator) hub controller IC with 4 downstream ports for embedded USB solutions. It is designed, fabricated, tested, charac-

terized and qualified for automotive applications. The 4-port hub is fully compliant with the USB 2.0 Specification. The

USB82514 will attach to an upstream port as a full-speed hub or as a full-/hi-speed hub. The 4-port hub supports low-

speed, full-speed, and hi-speed (if operating as a hi-speed hub) downstream devices on all of the enabled downstream

ports.

All required resistors on the USB ports are integrated into the hub. This includes all series termination resistors on D+

and D- pins and all required pull-down and pull-up resistors on D+ and D- pins. The over-current sense inputs for the

downstream facing ports have internal pull-up resistors.

The USB82514 includes over 30 programmable features including:

MultiTRAK™ Technology

which utilizes a dedicated TT per port to maintain consistent full-speed data throughput

regardless of the number of active downstream connections. MultiTRAK outperforms conventional USB 2.0 hubs with

a single TT in USB full-speed data transfers.

PortMap

which provides flexible port mapping and disable sequences. The down-

stream ports of a USB82514 hub can be reordered or disabled in any sequence to

support multiple platform designs with minimum effort. For any port that is disabled,

the USB82514 automatically reorders the remaining ports to match the USB host

controller’s port numbering scheme.

PortSwap

which adds per-port programmability to USB differential-pair pin loca-

tions. PortSwap allows direct alignment of USB signals (D+/D-) to connectors avoid-

ing uneven trace length or crossing of the USB differential signals on the PCB.

PHYBoost

which enables four programmable levels of USB signal drive strength in

downstream port transceivers. PHYBoost attempts to restore USB signal integrity

that has been compromised by system level variables such as poor PCB layout, long

cables, etc. The boost graphic shows an example of hi-speed USB eye diagrams

before (PHYBoost at 0%) and after (PHYBoost at 12%) signal integrity restoration in

a compromised system environment.

The USB82514 is specifically tailored for use in automotive applications requiring

automotive grade robustness starting with the comprehension of proprietary design for reliability techniques within the

silicon IC itself as well as for the package design. Automotive qualified technologies and processes are used to fabricate

the products with enhanced monitors to continuously drive improvements in accordance with our zero-dpm methodol-

ogy. Product qualification is focused on customer expectations and exceeds many of the automotive reliability standards

including AEC-Q100.

Microchip automotive services are provided during the life of the product from a dedicated organization composed of

operations, quality, and product support personnel specialized in meeting the requirements of the automotive customer.

Card Reader

60001234B-page 4



2014 Microchip Technology Inc.

USB82514

1.1

OEM Selectable Features

A default configuration is available in the USB82514 following a reset. This configuration may be sufficient for some

applications. Strapping option pins make it possible to modify a limited sub-set of the configuration options.

The USB82514 may also be configured by an external EEPROM or a microcontroller. When using the microcontroller

interface, the hub appears as an SMBus slave device. If the hub is pin-strapped for external EEPROM configuration but

no external EEPROM is present, then a value of ‘0’ will be written to all configuration data bit fields (the hub will attach

to the host with all ‘0’ values).

The USB82514 supports several OEM selectable features:

• Optional OEM configuration via I

C EEPROM or via the industry standard SMBus interface from an external

SMBus host or microcontroller, see

Table 7-1, "Hub Configuration Options"

to configure the serial port interface

behavior via the CFG_SEL1 and CFG_SEL0 pins.

• Compound device support (port is permanently hardwired to a downstream USB peripheral device), on a port-by-

port basis, see

"Register 07h: Configuration Data Byte 2",

bit COMPOUND.

• Select Single-Transaction Translator (STT) or Multi-Transaction Translator (MTT), see

"Register 06h: Configura-

tion Data Byte 1",

bit MTT_ENABLE.

• Select over-current sensing and port power control on an individual (port-by-port) or ganged (all ports together)

basis to match the OEM’s choice of circuit board component selection, see

"Register 06h: Configuration Data Byte

1",

bits CURRENT_SNS and PORT_PWR.

• Customize vendor ID, product ID, and device ID, see

"Register 00h: Vendor ID (LSB)", "Register 01h: Vendor ID

(MSB)", "Register 02h: Product ID (LSB)", "Register 03h: Product ID (MSB)", "Register 04h: Device ID (LSB)"

and

"Register 05h: Device ID (MSB)".

• Easily configure as a 2, 3 or 4-Port Hub in common PCB layout, see

"Register 0Ah: Port Disable for Self-Powered

Operation"

and

"Register 0Bh: Port Disable for Bus-Powered Operation".

• PortMap: Flexible port mapping and disable sequence. Ports can be disabled/reordered in any sequence to sup-

port multiple platforms with a single design. The hub will automatically reorder the remaining ports to match the

host controller's numbering scheme, see

"Register FBh: PortMap 12"

and

"Register FCh: PortMap 34".

• PortSwap: Programmable USB differential-pair pin location.

- Eases PCB layout by aligning USB signal lines directly to connectors, see

"Register FAh: PortSwap".

• PhyBoost: Programmable USB signal drive strength. Recover USB signal integrity due to compromised system

environments using 4 levels of signal drive strength, see

"Register F6h: Boost_Up"

and

"Register F8h: Boost_4:0".

• Configure the delay time for filtering the over-current sense inputs, see

"Register 07h: Configuration Data Byte 2",

bit OC_TIMER.

• Configure the downstream port power-on time reported to the host, see

"Register 10h: Power-On Time".

• Indicate the maximum current that the 4-port hub consumes from the USB upstream port, see

"Register 0Eh: Hub

Controller Max Current for Self-Powered Operation"

and

"Register 0Fh: Hub Controller Max Current for Bus-Pow-

ered Operation".

• Indicate the maximum current required for the hub controller, see

"Register 0Ch: Max Power for Self-Powered

Operation"

and

"Register 0Dh: Max Power for Bus-Powered Operation".

• Support custom string descriptor up to 31 characters in length for:

- Manufacturer string, see

"Register 16h-53h: Manufacturer String".

- Product string, see

"Register 54h-91h: Product String".

- Serial number string, see

"Register 92h-CFh: Serial String".

• Pin selectable options for default configuration:

- Downstream ports as non-removable ports, see

"Register 09h: Non-Removable Device".

- Downstream ports as disabled ports, see

"Register 0Ah: Port Disable for Self-Powered Operation"

and

"Reg-

ister 0Bh: Port Disable for Bus-Powered Operation".



2014 Microchip Technology Inc.

60001234B-page 5

参数对比

与USB82514AMR-B相近的元器件有：USB82514AF-A、USB82514AF-B、USB82514AFR-A、USB82514AFR-B、USB82514AM-A、USB82514AM-B、USB82514AMR-A。描述及对比如下：

型号	USB82514AMR-B	USB82514AF-A	USB82514AF-B	USB82514AFR-A	USB82514AFR-B	USB82514AM-A	USB82514AM-B	USB82514AMR-A
描述	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller	IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller
厂商名称	Microchip(微芯科技)	Microchip(微芯科技)	Microchip(微芯科技)	Microchip(微芯科技)	Microchip(微芯科技)	Microchip(微芯科技)	Microchip(微芯科技)	Microchip(微芯科技)
包装说明	QFN-36	QFN-36	QFN-36	QFN-36	QFN-36	QFN-36	QFN-36	QFN-36
Reach Compliance Code	compli	compli	compli	compli	compli	compli	compli	compli
总线兼容性	I2C, SMBUS, USB	I2C, SMBUS, USB	I2C, SMBUS, USB	I2C, SMBUS, USB	I2C, SMBUS, USB	I2C, SMBUS, USB	I2C, SMBUS, USB	I2C, SMBUS, USB
JESD-30 代码	S-XQCC-N36	S-XQCC-N36	S-XQCC-N36	S-XQCC-N36	S-XQCC-N36	S-XQCC-N36	S-XQCC-N36	S-XQCC-N36
长度	6 mm	6 mm	6 mm	6 mm	6 mm	6 mm	6 mm	6 mm
端子数量	36	36	36	36	36	36	36	36
最高工作温度	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C
最低工作温度	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C
封装主体材料	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED
封装代码	HVQCCN	HVQCCN	HVQCCN	HVQCCN	HVQCCN	HVQCCN	HVQCCN	HVQCCN
封装形状	SQUARE	SQUARE	SQUARE	SQUARE	SQUARE	SQUARE	SQUARE	SQUARE
封装形式	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
筛选级别	AEC-Q100; TS 16949	AEC-Q100; TS 16949	AEC-Q100; TS 16949	AEC-Q100; TS 16949	AEC-Q100; TS 16949	AEC-Q100; TS 16949	AEC-Q100; TS 16949	AEC-Q100; TS 16949
座面最大高度	1 mm	0.9 mm	0.9 mm	0.9 mm	0.9 mm	1 mm	1 mm	1 mm
最大供电电压	3.6 V	3.6 V	3.6 V	3.6 V	3.6 V	3.6 V	3.6 V	3.6 V
最小供电电压	3 V	3 V	3 V	3 V	3 V	3 V	3 V	3 V
标称供电电压	3.3 V	3.3 V	3.3 V	3.3 V	3.3 V	3.3 V	3.3 V	3.3 V
表面贴装	YES	YES	YES	YES	YES	YES	YES	YES
技术	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS
温度等级	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL
端子形式	NO LEAD	NO LEAD	NO LEAD	NO LEAD	NO LEAD	NO LEAD	NO LEAD	NO LEAD
端子节距	0.5 mm	0.5 mm	0.5 mm	0.5 mm	0.5 mm	0.5 mm	0.5 mm	0.5 mm
端子位置	QUAD	QUAD	QUAD	QUAD	QUAD	QUAD	QUAD	QUAD
宽度	6 mm	6 mm	6 mm	6 mm	6 mm	6 mm	6 mm	6 mm
uPs/uCs/外围集成电路类型	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS	BUS CONTROLLER, UNIVERSAL SERIAL BUS

msp430g2553.h头文件: 请问谁那有msp430g2553.h头文件1.5版本的？我安装的IAR里是这个版本头文件Re...; 风的世界微控制器 MCU

关于MSP430中断机制的理解: 因 DC的邀请写一个有关中断的东东，我也接触430不久只能以自己的心得体会更大家分享，若有纰漏恳请...; fish001 微控制器 MCU

2013鑫融投资担保有限公司，办理无抵押免担保小额贷款，高额信用卡。: 计价易业务：利率轻松计，定价更容易！私人贷款就找鑫融投资担保有限公司,最快2日放款,凭信用担保,最...; lcvifnlx 嵌入式系统

串口资料的无奈: 关于ATMEL51单片机串行通讯中的接收位RB8 余永全的《ATMEL89系列单片机应用技术》描述是...; 程序天使单片机

受打击了,看了一下午的ARM开发板的用户手册,连烧程序都没学会: 受打击了,看了一下午的ARM开发板的用户手册,连烧程序都没学会初学？恩,今天才摸这玩意什么型...; slamdunk ARM技术

推荐关于无线电入门的经典老书: 推荐两本适合无线电入门的好书，小时候看过，非常适合业余爱好者diy，专业技术人员也可以参考。 ...; liuxinxianbmw 模拟电子

欧洲宣布高额补贴计划，新能源汽车销量有望大涨

近日，法国总统马克龙宣布将为该国汽车产业增加80亿欧元援助计划，给购买电动车的私人消费者的政府补贴从6000欧元提高到7000欧元，商业客户可获得5000欧元补贴；换购柴/汽油车也可得到3000欧元补贴，换购纯电动车型获得5000欧元补贴。法国总统马克龙表示，希望到2025年，法国能够制造100万台清洁能源汽车，成为欧洲最大的生产国。另外，德国也在酝酿提高补贴计划。机构认为，欧盟将举...[详细]
EP7212处理器的LCD控制及触摸屏接口设计

摘要：介绍EP7212嵌入式处理器上LCD控制器的结构和功能；深入探讨ADS7843触摸屏接口芯片的模式选择才应用技巧；基于该系统给出一个与彩色LCD触摸屏相接的实际使用方案。关键词：嵌入式处理器 LCD 触摸屏控制器引言 EP7212是Cirrus Logic公司生产的单片嵌入式高集成度的处理器芯片，所有必需的接口逻辑都集成在芯片上，一个低功耗...[详细]
和CPU同样重要小编教你读懂手机内存

经常关注手机圈的朋友都会对智能手机有着自己的倾向，这也是根据不同需求而定的，人们在挑选手机时也会不自觉的主要关注自己感兴趣的点。像屏幕、处理器、电池容量、摄像头都是大家所关注的，作为硬件配置中“百搭”般的存在，内存也是非常重要的。手机中的内存相当于PC上的内存+硬盘，运行内存就是 PC上的内存，内置存储就是硬盘了，其功能特性也是和PC大同小异。　　简单来说，不论是运行内存还是内置...[详细]
具有远程开启功能的指纹应用系统设计

引言指纹识别是一种有效的身份识别技术。随着光电技术和半导体技术的发展，自动指纹识别技术越来越多地被应用到人们的日常生活之中。指纹锁和指纹保险箱是指纹识别应用中比较重要的产品。与指纹门禁不同，应用于锁具中的指纹系统一般采用电池供电，具有功耗低、体积小等特点。本文设计和实现了一个功耗低、人机界面良好的指纹识别应用系统，系统可以应用于门锁和保险箱。在实际生活中，经常碰到人在异地，但是需要别...[详细]
思亚诺王渭：在CMMB芯片市场份额接近50%

思亚诺全球副总裁兼中国区总理王渭　　新浪科技讯 3月22日晚间消息，CCBN 2012昨日开幕，在展会现场，思亚诺全球副总裁兼中国区总理王渭对新浪科技表示，思亚诺在CMMB我们在整个市场上占有的份额接近50%，今年已经推出了CMMB芯片中尺寸最小功耗最小的芯片3188。　　王渭介绍说，思亚诺从2006年开始参与CMMB标准的制定，“2008年我们推出了第一代的CMMB产品，今年我...[详细]
欧姆龙推出TM系列协同机器人 Sea-Tac机场发布机场服务机器人Tracy

1、业界|协作机器人：欧姆龙推出TM系列协同机器人，加速人与机器的协调总部设在京都的公司欧姆龙已经宣布在全球推出TM系列协同机器人家族，以实现在40个国家创新的制造环境中，人与机器和谐共处。凭借其各种视觉功能和简单，直观的编程环境，欧姆龙将进一步实现人与机器之间安全，灵活和协作的制造。TM系列协同机器人的三个主要特点：1.直观的编程界面缩短了编程时间2.集成的臂上视觉系统缩短了设置时间3....[详细]
活久见：工程师给一台三星手机增加Lightning接口

今年，有发烧友成功地将iPhone的Lightning接口转换为USB-C接口。最近，工程师Ken Pillonel成功地“反向操作”，为三星Galaxy A51增加了一个Lightning接口。之前，Pillonel因改装iPhone X而闻名，他为iPhone X添加了一个可用的USB-C接口，随后在拍卖会上以超过8.6万美元的价格售出。他的最新项目试图为Galaxy A51增加...[详细]
Medscape展望2014医疗事件

近日，知名医学网站Medscape（ http://www.medscape.com ）的编辑和顾问共同回顾了2013年的临床和医疗政策相关新闻，对2014年可能出现的重大突破进行了展望，本文对其中的临床相关内容进行了总结。 1. 实验室病毒检测将发生巨变随着美国食品与药物管理局（FDA）批准核酸扩增技术用于多种病毒检测，将大幅提高检测的敏感度和特异性，并且速度...[详细]
GSM网络的提升容量设计方法

　　随着GSM移动业务的迅猛发展，在保证通信质量的前提下最大限度地提高GSM网络容量始终是网络运营商们孜孜以求的目标。GSM扩容的传统方法是小区分裂与频段扩展，但目前得到新的频谱资源的可能性已经不大，在话务密集地区因受到干扰的限制，小区分裂亦举步维艰，因而采用更加紧密的频率复用技术、建立微蜂窝/微微蜂窝、建设GSM900/1800双频网络以及进行网络优化等已经成为解决 GSM网络容量的重要手段。...[详细]
stm32f4USART中USB转串口通信

初学stm32，初次接触USART串口通信。对USART通信硬件原理的个人总结。从MCU（Micro Controller Unit，也就是ST芯片）出来的TTL电平经过电平转换芯片转化为USB电平，从而实现与PC的通信。 USART(Universal Synchronous/Asynchronous Receiver/Transmitter）通用同步/异步串行接收/发送器。这边只作异步通...[详细]
有腿的机器人目前还不够可靠机器人运送包裹技术还需发展

德国汽车公司大陆集团以其轮胎最为人所知，但在2019年的CES上，这家公司展示了一些与众不同的东西：运送包裹的机器狗。作为研究移动性未来的一部分，大陆集团与ANYbocs机器人公司（苏黎世联邦理工学院的分支结构）合作，想象了包裹运输的未来。在CES展会上的一次演示中，该公司展示了ANYboTIcs的四足机器人是如何从一辆的送货卡车的背面跳出来并将包裹直接送到某人的前门。在演示中，我...[详细]
场内物流的突围赛

广告摘要声明广告撰文 | sya “近年来，无人叉车呈现出一种比较明显的增长趋势，劢微机器人首席科学家叶显明博士在10月27日举行的2021（第二届）高工移动机器人年会上表示，预计2021年，中国无人叉车市场总销量将达到5000辆。在物流搬运环节，主要以人工叉车为主。但由于传统的物流搬运的问题和痛点比较多，人工叉车搬运方式面临着居高不下的成本，除人工成本高以外，管理者还需要承担一些管理...[详细]
3月发布的iPad仅是iPad 2的升级版

　　Digitimes报道，据上游供应链的消息人士透露，苹果新一代iPad计划在2012年3月发布，将很快进入大批量生产阶段。然而，该消息人士透露，苹果似乎没有将即将生产的新iPad称作iPad 3，而只是iPad 2的升级版。真正的iPad 3最早还需到2012年第三季度才能发布。　　消息称，iPad 2升级版会比iPad 2更薄，电池续航能力也会更持久。鉴于...[详细]
步进音量电位器概述

音量电位器的作用仅仅为调节音量，问题就简单多了。但事实上，音量电位器是信号必经之路。它的重要性往往被低估。一直以来，音响科技都致力于创造零失真的元件，但在现实中这是个梦想。我们所追求的，其实是最低程度的妥协。　　VR故名思义就是VARIABLE RESISTOR可变电阻,一般机器是运用在调整信号大小用的,在音响上用在音量控制,左右平衡,高低音旋鈕…….都是.這种元件是以连续式的调整步进(滑动式...[详细]
解析动力电池与汽车安全的重要性

近年来，随着电动汽车的快速发展，如何解决电动汽车所带来的安全问题，又成为汽车行业的新的话题和难点。由于人们对新事物的认知有个过程，初期难免抱有怀疑和不信任的态度，所以任何一次有关电动汽车的安全事故，都会导致公众对电动汽车安全性的疑虑进一步加深，阻碍电动汽车的发展和普及。其实，传统的燃油车由于碰撞或自燃所导致的车辆起火事故，每年在全球都会发生很多起，造成严重人员伤亡的也为数不少，并不会造成公众的广...[详细]