型号
  • 型号
  • 关键词
首页 > 器件类别 > 嵌入式处理器和控制器 > 微控制器和处理器

USB82514AFR-A

IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller

器件类别：嵌入式处理器和控制器    微控制器和处理器   

厂商名称：Microchip(微芯科技)

厂商官网：https://www.microchip.com

下载文档
参数 预览 参数对比
器件参数
参数名称
属性值
厂商名称
Microchip(微芯科技)
包装说明
QFN-36
Reach Compliance Code
compli
地址总线宽度
总线兼容性
I2C, SMBUS, USB
外部数据总线宽度
JESD-30 代码
S-XQCC-N36
长度
6 mm
端子数量
36
最高工作温度
85 °C
最低工作温度
-40 °C
封装主体材料
UNSPECIFIED
封装代码
HVQCCN
封装形状
SQUARE
封装形式
CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
筛选级别
AEC-Q100; TS 16949
座面最大高度
0.9 mm
最大供电电压
3.6 V
最小供电电压
3 V
标称供电电压
3.3 V
表面贴装
YES
技术
CMOS
温度等级
INDUSTRIAL
端子形式
NO LEAD
端子节距
0.5 mm
端子位置
QUAD
宽度
6 mm
uPs/uCs/外围集成电路类型
BUS CONTROLLER, UNIVERSAL SERIAL BUS
文档预览
USB82514
Automotive Grade USB 2.0 Hi-Speed 4-Port Hub
Highlights
• High performance, low-power, small footprint hub
controller IC with 4 downstream ports
• Fully compliant with the USB 2.0 specification
• Enhanced OEM configuration options available
through either a single serial I
2
C™ EEPROM or
SMBus Slave Port
• MultiTRAK™ Technology
- High-performance multiple Transaction
Translator which provides one Transaction
Translator per port
• PortMap
- Flexible port mapping and port disable
sequencing
• PortSwap
- Programmable USB differential-pair pin loca-
tions ease PCB design by aligning USB sig-
nal traces directly to connectors
• PHYBoost
- Programmable USB transceiver drive
strength for recovering signal integrity due to
compromised system environment
• AEC-Q100 compliant
- Microchip’s parts are tested to meet or
exceed the requirements of the AEC-Q100
automotive qualification standards
Key Benefits
• Over 30 port configuration options
• Full power management with individual or ganged
power control of each downstream port
• Integrated 1.8 V core regulator
• Fully integrated USB termination and pull-up/pull-
down resistors
• On-board 24 MHz crystal driver, resonator, or
external 24 MHz clock input
• Customizable vendor ID, product ID, and device
ID
• Easily configurable as a 2, 3 or 4-Port Hub in
common PCB layout
• 36-pin (6x6 mm
2
) QFN, RoHS compliant package
- Also available as dimple package
• Temperature range: -40ºC to +85ºC
Target Applications
•
•
•
•
•
Automotive head unit
Automotive breakout box
Automotive media player dock
Portable device charging via USB
Rear seat infotainment access
2014 Microchip Technology Inc.
60001234B-page 1
USB82514
TO OUR VALUED CUSTOMERS
It is our intention to provide our valued customers with the best documentation possible to ensure successful use of your Microchip
products. To this end, we will continue to improve our publications to better suit your needs. Our publications will be refined and
enhanced as new volumes and updates are introduced.
If you have any questions or comments regarding this publication, please contact the Marketing Communications Department via
E-mail at
docerrors@microchip.com.
We welcome your feedback.
Most Current Data Sheet
To obtain the most up-to-date version of this data sheet, please register at our Worldwide Web site at:
http://www.microchip.com
You can determine the version of a data sheet by examining its literature number found on the bottom outside corner of any page.
The last character of the literature number is the version number, (e.g., DS30000000A is version A of document DS30000000).
Errata
An errata sheet, describing minor operational differences from the data sheet and recommended workarounds, may exist for cur-
rent devices. As device/documentation issues become known to us, we will publish an errata sheet. The errata will specify the
revision of silicon and revision of document to which it applies.
To determine if an errata sheet exists for a particular device, please check with one of the following:
• Microchip’s Worldwide Web site;
http://www.microchip.com
• Your local Microchip sales office (see last page)
When contacting a sales office, please specify which device, revision of silicon and data sheet (include -literature number) you are
using.
Customer Notification System
Register on our web site at
www.microchip.com
to receive the most current information on all of our products.
60001234B-page 2
2014 Microchip Technology Inc.
USB82514
Table of Contents
1.0 Introduction ..................................................................................................................................................................................... 4
2.0 Acronyms ........................................................................................................................................................................................ 6
3.0 Pin Configuration ............................................................................................................................................................................ 7
4.0 Pin Table ......................................................................................................................................................................................... 8
5.0 Block Diagram ................................................................................................................................................................................. 9
6.0 Pin Descriptions ............................................................................................................................................................................ 10
7.0 Configuration Options ................................................................................................................................................................... 15
8.0 DC Parameters ............................................................................................................................................................................. 39
9.0 AC Specifications .......................................................................................................................................................................... 44
10.0 Package Outline .......................................................................................................................................................................... 45
Appendix A: Data Sheet Revision History ........................................................................................................................................... 47
The Microchip Web Site ...................................................................................................................................................................... 49
Customer Change Notification Service ............................................................................................................................................... 49
Customer Support ............................................................................................................................................................................... 49
Product Identification System ............................................................................................................................................................. 50
2014 Microchip Technology Inc.
60001234B-page 3
USB82514
1.0
INTRODUCTION
The Microchip Automotive Grade USB 2.0 4-Port Hub is a low-power, OEM configurable, MTT (Multi- Transaction Trans-
lator) hub controller IC with 4 downstream ports for embedded USB solutions. It is designed, fabricated, tested, charac-
terized and qualified for automotive applications. The 4-port hub is fully compliant with the USB 2.0 Specification. The
USB82514 will attach to an upstream port as a full-speed hub or as a full-/hi-speed hub. The 4-port hub supports low-
speed, full-speed, and hi-speed (if operating as a hi-speed hub) downstream devices on all of the enabled downstream
ports.
All required resistors on the USB ports are integrated into the hub. This includes all series termination resistors on D+
and D- pins and all required pull-down and pull-up resistors on D+ and D- pins. The over-current sense inputs for the
downstream facing ports have internal pull-up resistors.
The USB82514 includes over 30 programmable features including:
MultiTRAK™ Technology
which utilizes a dedicated TT per port to maintain consistent full-speed data throughput
regardless of the number of active downstream connections. MultiTRAK outperforms conventional USB 2.0 hubs with
a single TT in USB full-speed data transfers.
PortMap
which provides flexible port mapping and disable sequences. The down-
stream ports of a USB82514 hub can be reordered or disabled in any sequence to
support multiple platform designs with minimum effort. For any port that is disabled,
the USB82514 automatically reorders the remaining ports to match the USB host
controller’s port numbering scheme.
PortSwap
which adds per-port programmability to USB differential-pair pin loca-
tions. PortSwap allows direct alignment of USB signals (D+/D-) to connectors avoid-
ing uneven trace length or crossing of the USB differential signals on the PCB.
PHYBoost
which enables four programmable levels of USB signal drive strength in
downstream port transceivers. PHYBoost attempts to restore USB signal integrity
that has been compromised by system level variables such as poor PCB layout, long
cables, etc. The boost graphic shows an example of hi-speed USB eye diagrams
before (PHYBoost at 0%) and after (PHYBoost at 12%) signal integrity restoration in
a compromised system environment.
The USB82514 is specifically tailored for use in automotive applications requiring
automotive grade robustness starting with the comprehension of proprietary design for reliability techniques within the
silicon IC itself as well as for the package design. Automotive qualified technologies and processes are used to fabricate
the products with enhanced monitors to continuously drive improvements in accordance with our zero-dpm methodol-
ogy. Product qualification is focused on customer expectations and exceeds many of the automotive reliability standards
including AEC-Q100.
Microchip automotive services are provided during the life of the product from a dedicated organization composed of
operations, quality, and product support personnel specialized in meeting the requirements of the automotive customer.
L1
L2
L3
L4
Card Reader
60001234B-page 4
2014 Microchip Technology Inc.
USB82514
1.1
OEM Selectable Features
A default configuration is available in the USB82514 following a reset. This configuration may be sufficient for some
applications. Strapping option pins make it possible to modify a limited sub-set of the configuration options.
The USB82514 may also be configured by an external EEPROM or a microcontroller. When using the microcontroller
interface, the hub appears as an SMBus slave device. If the hub is pin-strapped for external EEPROM configuration but
no external EEPROM is present, then a value of ‘0’ will be written to all configuration data bit fields (the hub will attach
to the host with all ‘0’ values).
The USB82514 supports several OEM selectable features:
• Optional OEM configuration via I
2
C EEPROM or via the industry standard SMBus interface from an external
SMBus host or microcontroller, see
Table 7-1, "Hub Configuration Options"
to configure the serial port interface
behavior via the CFG_SEL1 and CFG_SEL0 pins.
• Compound device support (port is permanently hardwired to a downstream USB peripheral device), on a port-by-
port basis, see
"Register 07h: Configuration Data Byte 2",
bit COMPOUND.
• Select Single-Transaction Translator (STT) or Multi-Transaction Translator (MTT), see
"Register 06h: Configura-
tion Data Byte 1",
bit MTT_ENABLE.
• Select over-current sensing and port power control on an individual (port-by-port) or ganged (all ports together)
basis to match the OEM’s choice of circuit board component selection, see
"Register 06h: Configuration Data Byte
1",
bits CURRENT_SNS and PORT_PWR.
• Customize vendor ID, product ID, and device ID, see
"Register 00h: Vendor ID (LSB)", "Register 01h: Vendor ID
(MSB)", "Register 02h: Product ID (LSB)", "Register 03h: Product ID (MSB)", "Register 04h: Device ID (LSB)"
and
"Register 05h: Device ID (MSB)".
• Easily configure as a 2, 3 or 4-Port Hub in common PCB layout, see
"Register 0Ah: Port Disable for Self-Powered
Operation"
and
"Register 0Bh: Port Disable for Bus-Powered Operation".
• PortMap: Flexible port mapping and disable sequence. Ports can be disabled/reordered in any sequence to sup-
port multiple platforms with a single design. The hub will automatically reorder the remaining ports to match the
host controller's numbering scheme, see
"Register FBh: PortMap 12"
and
"Register FCh: PortMap 34".
• PortSwap: Programmable USB differential-pair pin location.
- Eases PCB layout by aligning USB signal lines directly to connectors, see
"Register FAh: PortSwap".
• PhyBoost: Programmable USB signal drive strength. Recover USB signal integrity due to compromised system
environments using 4 levels of signal drive strength, see
"Register F6h: Boost_Up"
and
"Register F8h: Boost_4:0".
• Configure the delay time for filtering the over-current sense inputs, see
"Register 07h: Configuration Data Byte 2",
bit OC_TIMER.
• Configure the downstream port power-on time reported to the host, see
"Register 10h: Power-On Time".
• Indicate the maximum current that the 4-port hub consumes from the USB upstream port, see
"Register 0Eh: Hub
Controller Max Current for Self-Powered Operation"
and
"Register 0Fh: Hub Controller Max Current for Bus-Pow-
ered Operation".
• Indicate the maximum current required for the hub controller, see
"Register 0Ch: Max Power for Self-Powered
Operation"
and
"Register 0Dh: Max Power for Bus-Powered Operation".
• Support custom string descriptor up to 31 characters in length for:
- Manufacturer string, see
"Register 16h-53h: Manufacturer String".
- Product string, see
"Register 54h-91h: Product String".
- Serial number string, see
"Register 92h-CFh: Serial String".
• Pin selectable options for default configuration:
- Downstream ports as non-removable ports, see
"Register 09h: Non-Removable Device".
- Downstream ports as disabled ports, see
"Register 0Ah: Port Disable for Self-Powered Operation"
and
"Reg-
ister 0Bh: Port Disable for Bus-Powered Operation".
2014 Microchip Technology Inc.
60001234B-page 5
查看更多>
参数对比
与USB82514AFR-A相近的元器件有：USB82514AF-A、USB82514AF-B、USB82514AFR-B、USB82514AM-A、USB82514AM-B、USB82514AMR-A、USB82514AMR-B。描述及对比如下：
型号 USB82514AFR-A USB82514AF-A USB82514AF-B USB82514AFR-B USB82514AM-A USB82514AM-B USB82514AMR-A USB82514AMR-B
描述 IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller IC UNIVERSAL SERIAL BUS CONTROLLER, Bus Controller
厂商名称 Microchip(微芯科技) Microchip(微芯科技) Microchip(微芯科技) Microchip(微芯科技) Microchip(微芯科技) Microchip(微芯科技) Microchip(微芯科技) Microchip(微芯科技)
包装说明 QFN-36 QFN-36 QFN-36 QFN-36 QFN-36 QFN-36 QFN-36 QFN-36
Reach Compliance Code compli compli compli compli compli compli compli compli
总线兼容性 I2C, SMBUS, USB I2C, SMBUS, USB I2C, SMBUS, USB I2C, SMBUS, USB I2C, SMBUS, USB I2C, SMBUS, USB I2C, SMBUS, USB I2C, SMBUS, USB
JESD-30 代码 S-XQCC-N36 S-XQCC-N36 S-XQCC-N36 S-XQCC-N36 S-XQCC-N36 S-XQCC-N36 S-XQCC-N36 S-XQCC-N36
长度 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm
端子数量 36 36 36 36 36 36 36 36
最高工作温度 85 °C 85 °C 85 °C 85 °C 85 °C 85 °C 85 °C 85 °C
最低工作温度 -40 °C -40 °C -40 °C -40 °C -40 °C -40 °C -40 °C -40 °C
封装主体材料 UNSPECIFIED UNSPECIFIED UNSPECIFIED UNSPECIFIED UNSPECIFIED UNSPECIFIED UNSPECIFIED UNSPECIFIED
封装代码 HVQCCN HVQCCN HVQCCN HVQCCN HVQCCN HVQCCN HVQCCN HVQCCN
封装形状 SQUARE SQUARE SQUARE SQUARE SQUARE SQUARE SQUARE SQUARE
封装形式 CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
筛选级别 AEC-Q100; TS 16949 AEC-Q100; TS 16949 AEC-Q100; TS 16949 AEC-Q100; TS 16949 AEC-Q100; TS 16949 AEC-Q100; TS 16949 AEC-Q100; TS 16949 AEC-Q100; TS 16949
座面最大高度 0.9 mm 0.9 mm 0.9 mm 0.9 mm 1 mm 1 mm 1 mm 1 mm
最大供电电压 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V
最小供电电压 3 V 3 V 3 V 3 V 3 V 3 V 3 V 3 V
标称供电电压 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
表面贴装 YES YES YES YES YES YES YES YES
技术 CMOS CMOS CMOS CMOS CMOS CMOS CMOS CMOS
温度等级 INDUSTRIAL INDUSTRIAL INDUSTRIAL INDUSTRIAL INDUSTRIAL INDUSTRIAL INDUSTRIAL INDUSTRIAL
端子形式 NO LEAD NO LEAD NO LEAD NO LEAD NO LEAD NO LEAD NO LEAD NO LEAD
端子节距 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm 0.5 mm
端子位置 QUAD QUAD QUAD QUAD QUAD QUAD QUAD QUAD
宽度 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm 6 mm
uPs/uCs/外围集成电路类型 BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS BUS CONTROLLER, UNIVERSAL SERIAL BUS
经典电路
谢谢各位，谁能帮我分析一下这个电路的作用啊！！！！！！！ 经典电路 经典电路 谢谢各位，谁能帮我分...
fightinmyway 模拟电子
音频
用蜂鸣片做声音接受，接受到信号以后，想无线传输出去，音频信号接受到以后怎样转化成数字信号，有模块可以...
2517908753 模拟电子
之前在论坛做活动得到的USB HUB板子和可调电源板子赠送
之前在论坛做活动得到的USB HUB板子和可调电源板子赠送，邮费自理哦，这两个PCB板的资料在坛子里...
hanskying666 淘e淘
Lpc1768编程菜鸟问题求教
Lpc1768声明放在.h文件里，在主函数编译时怎么老是报.h文件里首行#ifndef _LED_...
zhandizhandi 嵌入式系统
G2553在操作P1IN和P2IN上有顺序要求吗？
我在用G2553写矩阵键盘的控制程序时用到了8个IO口，分别是P2.0—P2.5、P1.6、P1....
yumao 微控制器 MCU
如何使用TARGET3001!创建异形焊盘的封装
大家在使用TARGET软件过程中，可能会对软件的一些功能不尽熟知，比如在有些情况下，某些特定的元器...
Target3001 PCB设计
热门器件
热门资源推荐
数码管随机模拟显示乘法口诀(1).rar Protel教程.pdf RF射频技术在无线通信领域的应用及发展 SCS-C is another port to C of Goldberg s Simple Classifier System,with a few extensions. s3c2410的IO模拟SPI驱动程序 what new and are.Seach boot story def little and a huo. Documentation for the following topicsMulti-tasking&Task_switchingVxWorks ipc mechanismvxworks 华为硬件工程师手册 MK_单片机应用系统与抗干扰技术 402页 9.4M.pdf 万用表在家电维修中的使用
参加Cypress研讨会弄到的两套开发板 【ufun学习】学习篇4：《基础例程3 - 蜂鸣器控制》 mount 不上 请教高手 EEWORLD大学堂----基于国网DL645协议的可蓝牙无线抄读的智能仪表（网友KW41作品演示） 流驱动如何实现多次加载 一个关于ListCtrl的问题 DRAM需要配置，SRAM、ROM、NOR在使用前需要配置吗？ 也谈技术人员发展方向及嵌入式学习 嵌入式CPU的问题
简洁的过零调功器电路设计与分析 单稳态控制电路设计与分析 光控电路设计与分析 永不缺相启动运行的电动机控制电路 IGBT模块通过控制门极阻断过电流 MT3608构成3.7V转12V的升压电路图 运算放大器IC741的基本工作原理及在电路中的实现方式 比较常见的功率整流器和滤波电路 一个简单的红外耳机电路 基于TDA1554的立体声放大器电路
器件捷径:
A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ
需要登录后才可以下载。
登录取消