Key Features

Build powerful robots with the all new BeagleBone Blue

Communicate with your robot and teach it to detect and respond to its environment

Control walking, rolling, swimming, and flying robots with your iOS and Android mobile devices

Book Description

BeagleBone Blue is effectively a small, light, cheap computer in a similar vein to Raspberry Pi and Arduino. It has all of the extensibility of today\'s desktop machines, but without the bulk, expense, or noise. This project guide provides step-by-step instructions that enable anyone to use this new, low-cost platform in some fascinating robotics projects. By the time you are finished, your projects will be able to see, speak, listen, detect their surroundings, and move in a variety of amazing ways.

The book begins with unpacking and powering up the components. This includes guidance on what to purchase and how to connect it all successfully, and a primer on programming the BeagleBone Blue. You will add additional software functionality available from the open source community, including making the system see using a webcam, hear using a microphone, and speak using a speaker.

You will then learn to use the new hardware capability of the BeagleBone Blue to make your robots move, as well as discover how to add sonar sensors to avoid or find objects. Later, you will learn to remotely control your robot through iOS and Android devices. At the end of this book, you will see how to integrate all of these functionalities to work together, before developing the most impressive robotics projects: Drone and Submarine.

What you will learn

Power on and configure the BeagleBone Blue

Get to know Simple programming techniques to enable the unique hardware capabilities of the BeagleBone Blue.

Connect standard hardware to enable your projects to see, speak, hear, and move

Build advanced capabilities into your projects, such as GPS and sonar sensors

Build complex projects that can fly, or go under or on the water

About the Author

Dr. Richard Grimmett has been fascinated by computers and electronics from his very first programming project, which used Fortran on punch cards. He has bachelor\'s and master\'s degrees in electrical engineering and a PhD in leadership studies. He also has 26 years of experience in the radar and telecommunications industries, and even has one of the original brick phones. He now teaches computer science and electrical engineering at Brigham Young University, Idaho, where his office is filled with his many robotics projects.

Table of Contents

Getting Started with the BeagleBone Blue

Programming the BeagleBone Blue

Making the unit mobile: Controlling Wheeled/Tracked Movement

Avoiding Obstacles Using Sensors

Allowing the BeagleBone Blue to See

Providing Speech Input and Output

Making the unit very mobile: Controlling Legged Movement

Using a GPS Receiver to Locate Your Robot

By Land, Sea, and Air

System Dynamics