历史上的今天
今天是:2025年02月09日(星期日)
2020年02月09日 | MSP430学习笔记-USART
2020-02-09 来源:eefocus
Note: Initializing or Re-Configuring the USART Module
The required USART initialization/re-configuration process is:
1) Set SWRST (BIS.B #SWRST,&UxCTL)
2) Initialize all USART registers with SWRST = 1 (including UxCTL)
3) Enable USART module via the MEx SFRs (URXEx and/or UTXEx)
4) Clear SWRST via software (BIC.B #SWRST,&UxCTL)
5) Enable interrupts (optional) via the IEx SFRs (URXIEx and/or UTXIEx)
Failure to follow this process may result in unpredictable USART behavior
Asynchronous Communication Formats
Idle-Line Format
The URXWIE bit is used to control data reception in the idle-line
multiprocessor format. When the URXWIE bit is set, all non-address
characters are assembled but not transferred into the UxRXBUF, and
interrupts are not generated. When an address character is received, the
receiver is temporarily activated to transfer the character to UxRXBUF and
sets the URXIFGx interrupt flag.
接收到地址字节才唤醒处理器
If an address is received, user software can validate the address and must
reset URXWIE to continue receiving data. If URXWIE remains set, only
address characters will be received. The URXWIE bit is not modified by the
USART hardware automatically.
URXWIE需要用软件重置
上一篇:msp430 学习经验总结
下一篇:MSP430学习笔记-IO端口
史海拾趣
|
Wingshing (WS) WS7107CPLG RG0720 Wingshing (WS) WS7107CPLG RG0720 谁有这个芯片的中文资料,怎么发现网上这种芯片的资料很少 刚刚从公司的库存里翻出一大堆用这个芯片制作的电流表 具说是以前作出来有问题没有处理,现在要弄出来 电路很简单,但是俺不知道这个芯片的 ...… 查看全部问答> |
|
信号类的模块不太通用,我们不可能整出一个通用的放大电路或者滤波电路。但是大家可以在此说说自己遇到的问题和解决的方法。我们要的是思想,不是硬件呵呵 我先说说我的问题,现在还没解决,高手帮一下忙,谢谢了 1:信号发生器的负载能力,如何提 ...… 查看全部问答> |
|
目录: 第一章 概述 §1-1模拟相乘器的基本概念 §1-2理想相乘器的基本性质 1-2-1静态特性 1-2-2线性和非线性性质 §1-3实际相乘器的误差 1-3-1静态(直流)误差 1-3-2动态(交流)误差 §1-4模拟相乘技术的基本原理 1-4-1霍尔效应相乘法 ...… 查看全部问答> |
|
诚招工控软件开发合作伙伴,要求:具有工控软件开发经验,熟悉串口通信,有合作意向的朋友请联系13705408100或邮件 tangqing1226@163.com &nbs ...… 查看全部问答> |




