Amprobe ACF3000 AK
AC Current Probe
Operating Instructions
Mode d’emploi
Bedienungshandbuch
Manuale Operativo
Manual de uso
AMPROBE
Table of Contents
Batteries are included.
Thank you for buying this product
For safety reasons and optimum use of this instrument
read through the operating instructions very carefully.
Table of Contents
1
2
3
4
4.1
4.2
4.3
4.4
5
6
SAFETY ......................................................................1
INTRODUCTION .........................................................2
SPECIFICATIONS.......................................................4
OPERATION ...............................................................6
Battery installation ...................................................6
Measuring current with the ACF3000 AK.................6
Operation .................................................................8
Battery status ...........................................................8
MAINTENANCE ..........................................................8
WARRANTY................................................................9
Issue 1 20/06/02.
Safety
1
SAFETY
The following symbols appear on the products:
Attention! Refer to Manual
Double/Reinforced Insulation
Read all instructions completely before using this product.
To avoid electric shock:
•
Use caution during installation and use of this product; high voltages and
currents may be present in circuit under test.
•
This product must be used only by qualified personnel practicing
applicable safety precautions.
•
Wear protective clothing and gloves as required.
•
Do not install this product on live conductors.
•
Always de energize circuit under test before installing flexible measuring
head. Always inspect the electronics unit, connecting cable, and flexible
measuring head for damage before using this product.
•
Do not use product if damaged.
•
Always connect electronics unit to display device before installing the
flexible measuring head.
•
Never change batteries while measurement head is installed on
conductor.
1
